Reddit Reddit reviews Frankford Arsenal Platinum Series Rotary Tumbler for Cleaning and Polishing Brass for Reloading

We found 10 Reddit comments about Frankford Arsenal Platinum Series Rotary Tumbler for Cleaning and Polishing Brass for Reloading. Here are the top ones, ranked by their Reddit score.

Frankford Arsenal Platinum Series Rotary Tumbler for Cleaning and Polishing Brass for Reloading
Specs: With a large 7-liter capacity this tumbler can clean up to 1,000 cases of .223 brass at a timeEase of use: Features a maintenance-free drive train that eliminates the chances of needing to replace a belt and has a built-in timer in the base that can be set to run for up to 3 hours, shutting off automaticallyVersatility: This tumbler can effectively clean without the use of stainless steel media pins and can clean using a mixture of brass cleaning solution and waterQuiet: This tumbler features a dual-layer drum with noise dampening rubber lining for minimal noise while runningIncludes: This tumbler comes with 5 pound of 304 Stainless Steel Media (enough for hundreds of washes) and a sample packet of Frankford Arsenal Brass Cleaning Solution
Check price on Amazon

10 Reddit comments about Frankford Arsenal Platinum Series Rotary Tumbler for Cleaning and Polishing Brass for Reloading:

u/MrBrian22 · 8 pointsr/reloading

I'd think a wet tumbler for brass cleaning would be greatly beneficial...
https://www.amazon.com/Frankford-Arsenal-909544-Rotary-Tumbler/dp/B00HTN4R6O/ref=sr_1_1?ie=UTF8&qid=1468347883&sr=8-1&keywords=frankford+arsenal

If he's mentioned other calibers you could get him some dies for those calibers. And if he gets more into rifle calibers, perhaps a brass prep stations such as
https://www.amazon.com/Frankford-Arsenal-Platinum-Center-System/dp/B00HS7JEB4/ref=sr_1_2?ie=UTF8&qid=1468347979&sr=8-2&keywords=brass+trimmer

Props to you for helping him further his hobby!

u/Kuric1 · 2 pointsr/reloading

You may want to look into a turret style as it'll make things easier and faster. Like the Redding T7

www.amazon.com/gp/aw/d/B000VNO2QO/

Also you may want to get a Frankford Arsenal digital scale it's 1/3 the price and has better reviews.

https://www.amazon.com/gp/aw/d/B002BDOHNA/

I'd go with the Frankford Arsenal wet tumbler it's easier, holds more and the brass is cleaner. Also no dust.

www.amazon.com/gp/aw/d/B00HTN4R6O/

Also get the Lyman kinetic bullet puller it's got a nice soft handle the collet puller is nice if you have a lot of them to do.

https://www.amazon.com/gp/aw/d/B0037N6IXA/

And don't forget a case gauge for each caliber

https://www.amazon.com/gp/aw/d/B001QD9XQ2/

u/Jumpsuit_boy · 2 pointsr/reloading

The Franklin product is also good.
http://smile.amazon.com/Frankford-Arsenal-909544-Rotary-Tumbler/dp/B00HTN4R6O/

u/cosmos7 · 2 pointsr/reloading

Although you might want something bigger if you're doing lots of rifle cases...

u/allsyrt · 2 pointsr/reloading

I have the Frankford Arsenal Platinum Series Rotary Tumbler Here and couldn't be happier. It is now the same price or less than Ultra Sonic and does a much better job for me. I have every method out there, HF drum, HF dry, HF Ultra Sonic, RCBS Ultra Sonic, etc.. The Wet tumbler is the king of them all and a food dehydrator gets used in the winter to dry brass or a towel on the picnic table during the summer. The only problem I have is the brass will tarnish within days of drying, I'm looking into a solution for that right now. Others seem to have figured out the tarnishing problem already.

u/sqlbullet · 2 pointsr/reloading

I have this:

https://www.amazon.com/Platinum-Series-Rotary-Tumbler-7L/dp/B00HTN4R6O/ref=sr_1_1?ie=UTF8&qid=1487799908&sr=8-1&keywords=frankford+arsenal+tumbler

Yes it is more than double. No I can 't say it is twice as good. Looks like several guys have the one you are considering and like it.

u/DragonCenturion · 2 pointsr/reloading

Check the FAQ like the sidebar says. But I've got nothing pressing at the moment so here:

I'm answering your last question first. The Lyman manual is definitely a good place to start. And you should purchase that first and read it before you purchase anything else. It will answer most of your questions and keep you safe. It is also recommended to get other brand manuals as well, such as Lee or Hornady. Every manual is different and will give you a broader base to start from.

Press: I'm a single stage guy so I can't help with the press. You will need caliber specific dies. All brands work, Lee is the cheapest, RCBS is kinda the standard, Dillon a step above RCBS, Forster is generally regarded as the best. If you use carbide dies you don't really need to lube pistol brass. And if you do lube, its personal preference. I use a 10:1 alcohol lanolin mix that I spray on the brass inside a gallon ziplock, then shake around a bit.

Tumbler: I use the HF dual drum with a modded drum. It works fine for me as I do small batches of rifle brass. You should probably look at the FA Tumbler or something larger. It comes with media and a small packet of their detergent. Most people have great results with dish soap and a pinch of lemishine. And you really shouldn't need a primer pocket cleaner if you wet tumble.

Bullets: Those bullets should work well. And its mostly personal preference and what shoots well out of your specific firearm.

Powder: Powder is something you either buy in person or large bulk orders. The hazmat fee is a killer unless you are ordering the max weight per order, which is normally about 50 pounds. And unless you are dead set on a certain powder, most people use what they can find locally. The Field and Stream should have powder, I've never been to a Walmart that sells smokeless powder. And read your manual to know it that powder has load data for what you are loading.

Primers: Primers for the most part are personal preference, they don't affect loads until you get into long range precision rifle. And see the powder above about hazmat fees.

Calipers: Those calipers will work.

Chronograph: You really don't need a chrono for what you'll be doing, at least initially.

Have fun and stay safe. Welcome to the rabbit hole that is reloading.

u/cawpin · 2 pointsr/reloading

As somebody who just last night setup and ran my first batch of wet/SS brass after nearly 20 years of vibratory tumbling, I'll tell you the following: (based off using the Harbot Freight dual-drum machine)

  1. It is no faster, or even the same speed, unless you have a very large tumbler like the Frankford Arsenal.

  2. The noise is similar, maybe slightly louder because of metal on metal clinking.

  3. The cost of supplies will probably be about the same, maybe less; a squirt of Dawn and a case full of Lemi-Shine per batch.

  4. It isn't as simple as vibratory tumbling. You'll have to figure out the recipe that works best for you, including speed vs cleanliness.

  5. Separating is more difficult and time consuming. (Granted, I haven't figured out a good quick way because I'm just starting)

  6. Drying is more time but is included in my initial statement about it not being quicker. It really isn't longer either. It does, however, require more space the vibratory because of this step. You have to put them somewhere to dry, be it in an oven or laid out and blow dry them.

    All that said, the results I got the first time were great. The brass was as shiny as my vibratory polished brass was, I don't necessarily go for the brand-new shiny look, and the insides and primer pockets were ABSOLUTELY cleaner. Most of the cases were completely clean inside both. There were just a few that had some small spots that weren't but still WAY cleaner than vibratory ever got them.

    The only thing I need to figure out is how much Lemi-shine to use and how much time to get the brand-new shiny look. It'd be nice, but not a requirement.
u/bdsmchs · 1 pointr/reloading

The frankford arsenal tumbler keeps going down in price and comes with 5 pounds of SS pins (a $50 value).

http://amzn.com/B00HTN4R6O

I know people love to do things cheaply, but this thing isn't that expensive and can hold a LOT of brass and SS pins. It has a timer built in so you can literally set it and forget it.

u/jahesus · 1 pointr/reloading

Was it this one?

http://www.amazon.com/Frankford-Arsenal-909544-Rotary-Tumbler/dp/B00HTN4R6O/ref=sr_1_2?ie=UTF8&qid=1453834390&sr=8-2&keywords=frankford+arsenal+tumbler