Reddit Reddit reviews GELID GC-Extreme 3.5g with tooling - Thermal Conductive Paste for Heatsink | Maximum Thermal Conductivity | Easy application | Not Corrosive

We found 29 Reddit comments about GELID GC-Extreme 3.5g with tooling - Thermal Conductive Paste for Heatsink | Maximum Thermal Conductivity | Easy application | Not Corrosive. Here are the top ones, ranked by their Reddit score.

Electronics
Computers & Accessories
Computer Components
Heatsinks
Internal Fans & Cooling Components
Computer Internal Components
GELID GC-Extreme 3.5g with tooling - Thermal Conductive Paste for Heatsink | Maximum Thermal Conductivity | Easy application | Not Corrosive
CREATED FOR EXTREME USES: The GC-Extreme thermal compound achieves the best heat conductivity from your CPU o VGA Card.MAXIMUM THERMAL CONDUCTIVITY: The GC-Extreme guarantees exceptional heat dissipation and supports the stability required to push the system to the desired limit.EASY AND SAFE APPLICATION: Thanks to GELID Applicator, you can apply EASY and SECURE GC-EXTREME on the CPU.OPERATING TEMPERATURE: The GC-Extreme can operate between -45 degrees up to +180 degrees CelsiusTHERMAL CONDUCTIVITY: The GC-Extreme has a Thermal Conductivity of 8.5W/mk with a Density of 3.73g/cm³
Check price on Amazon

29 Reddit comments about GELID GC-Extreme 3.5g with tooling - Thermal Conductive Paste for Heatsink | Maximum Thermal Conductivity | Easy application | Not Corrosive:

u/bigluke575 · 10 pointsr/buildapc

Definitely! The thermal paste and pads come with the GPU but they just use a standard one of sorts. Aftermarket thermal compounds work better and lower temps a bit more, which could mean everything in terms of thermal throttling.

Here are the thermal pads that I bought.. I cut them into strips and placed them over the place where you see "SFC" near the blue circles on the PCB.

Here is the thermal paste I used on both by GPU and CPU. I used a dot formation on the CPU and an "X" formation on the GPU.

Hope this helps!

u/Hothicon · 6 pointsr/PS4Pro

Oh, you said you already had that so I assumed you didn't need it.

Gelid OC Extreme: https://www.amazon.com/Gelid-Solutions-GC-Extreme-Compound-TC-GC-03/dp/B002P5W4RU/

Grizzly Thermalpad: https://www.amazon.com/gp/product/B00ZJS8RWQ/

NIDEC Fan: If you can find one at all and one that isn't shit like I got. They are hard and rare to get due to increased demand.
I got mine from here but it was damaged https://www.ebay.com/itm/Sony-PlayStation-4-PS4-Pro-Internal-Fan-G95C12MS1AJ-56J14-KSB1012H-CUH-7015B/222840647319?hash=item33e2566e97:m:mdoCV6CtvEfaOKvTVYb477g:sc:USPSFirstClass!98105!US!-1

u/waldojim42 · 4 pointsr/Alienware

Ok, if you don't feel comfortable doing the work, then having someone else do it is best. However, it generally isn't that hard if you take your time.

I use a Craftsman small screwdriver set like that one, and have for years. Yes, there are cheaper tools. But I happen to like these.

There is a guide on how to tear into your machine, available right here.

It will take you step by step what you need to take apart. Click on the Prerequisites for section "removing heat sink assembly." It will show you what all has to be torn down to get to that part, and remove it.

Then, clean the old paste off with a lint free cloth, and decent rubbing alcohol. I avoid 70% at all costs. I prefer my 99.9% stuff, but have used 80% when in a bind. Make sure it dries completely before you continue. Pure stuff dries very quickly, less pure can take some time.

Then apply the new paste as a thin line about the length of a grain of rice. Don't smear it, try to spread it, or anything else UNLESS it is specifically designed for that (liquid metals come to mind). Then, reassemble. Be careful to ensure the heat spreader is attached evenly, with appropriate pressure.

Undervolting allows you to reduce the heat of the chip by running at voltages lower than it was designed for. Ideally, this shouldn't have to be done. Assuming a decent paste job, you won't. If you do find yourself in the position where that needs done, then use Intel XTU to adjust the voltage in small increments, and run Prime 95 in the background to monitor the results. If the machine becomes unstable, or starts throttling, you went too far.

What you need:
Screw drivers

Lint free cloth (some people use coffee filters, or even paper towels)

Alcohol

Paste (I use IC7 Diamond these days. Works very well on my machines. Arctic Silver 5 is still decent stuff, as is Gelid Extreme. There are others, and I am sure someone else will chime in with their favorites)

Clean, static reducing/non static working environment

u/coldfusion718 · 3 pointsr/pcmasterrace

Gelid Solutions GC-Extreme Thermal Compound TC-GC-03-A https://www.amazon.com/dp/B002P5W4RU/ref=cm_sw_r_sms_awd_oqALwb380F4ZZ

Buy it from Outlet PC for $12.48 shipped.

Arctic Silver is old news.

u/ArcoliteUK · 2 pointsr/Alienware

As above, Liquid Metal products scared me a little so I opted to use GC-Extreme.

A user on Overclockers UK tested many paste brands and GC-Extreme came a close second to Liquid Metal under load (https://forums.overclockers.co.uk/showthread.php?t=18416534).

http://i1232.photobucket.com/albums/ff379/stulidreviews/Thermal%20paste/Untitled2-1.png

u/SubiFriend · 2 pointsr/PS4Pro

If it's obnoxiously loud, then I'm a bit surprised to hear that you have a Nidec. Yes, it can't hurt to try replacing the thermal paste.

As has been widely recommended by other professionals on here, I went with this Gelid paste:

https://www.amazon.com/gp/product/B002P5W4RU

And I replaced the square pads on the RAM with this stuff:

https://www.amazon.com/gp/product/B00ZJS8RWQ

For the thermal pads, I used a razor to cut it into small squares like the original pad sizes. If you do that, the single strip should be enough for 4-5 Pro units.

I'll check into tutorials and follow up again.

u/K_M_A_2k · 2 pointsr/pcmasterrace

https://www.amazon.com/gp/product/B002P5W4RU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Every once in a while you see a report about what is the best paste this stuff has been winning for a while

u/eNiomeL · 2 pointsr/laptops
u/yuri53122 · 2 pointsr/Amd

you'd need two of these, and if you'd like one of these or these (optional). Pump/reservoir/radiator recommendations are based on case compatibility. A fan controller that is compatible with water temperature sensors is recommended as well.


However, if only one card is getting that hot, have you considered taking the heatsink off and putting on better thermal compound such as Gelid GC-Extreme? I'd try that first.

u/HMFW213 · 1 pointr/pcmasterrace

https://imgur.com/a/RhIfExh This list includes everything except my two side monitors , my monitor stand and my thermal paste . I will not name the company I went with for a prebuilt nor will I answer your DM's about the company. It was a live and learn situation and I'm moving on. Next step is my crazier audio set up I will be saving for. Hope you like the build and I cant wait to be back to gaming!

u/littlegreymen12 · 1 pointr/Alienware

no undervolting

I first re-pasted with Artic Silver 5 and didn't see any improvements.

Then re-pasted with the below and haven't had issues since.

https://www.amazon.com/gp/product/B002P5W4RU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Gelid Solutions GC-Extreme Thermal Compound TC-GC-03-A

u/[deleted] · 1 pointr/buildapc

First of all don't go buying Kryonaut, who the hell knows if it's fake or not, they don't sell direct! Just get this at least you know it's real and works great https://www.amazon.com/gp/product/B002P5W4RU/

u/Voorrk · 1 pointr/intel

Oh true that. And ya 80-90 is pretty high. I think someone else posted that it will shave off a good 20-30 with a delid. One thing I noticed also is to use good thermal paste. I tried artic silver at first but a buddy had some https://www.amazon.com/gp/product/B002P5W4RU/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 . Decent drop in heat worth the extra couple dollar.s

u/steeda1974 · 1 pointr/Alienware
u/brryz_ · 1 pointr/thinkpad

I used GC Extreme, cause it's cheaper but still close to Kryonaut's performance. Also, I put the Sunon x250 fan in my x240 and it has made it much quieter in general.

u/The_Scheme · 1 pointr/PS4

Gelid Solutions GC-Extreme

This is the BEST paste available, and it has been the best for a very long time (based on benchmarks -- you can look them up if you'd like). Do not buy anything else.

u/Nostalk779 · 1 pointr/Alienware

Gelid extreme is a very good paste. I used both kryonaut and gelid, and gelid is a better value... temp difference is negligible.

https://www.amazon.com/Gelid-Solutions-GC-Extreme-Compound-TC-GC-03/dp/B002P5W4RU/ref=sr_1_1?ie=UTF8&qid=1520217785&sr=8-1&keywords=gelid+extreme

u/Turn-n-Burn · 1 pointr/buildapc

I would get a hyper 212 and some new thermal paste. NOT arctic silver. This is very very good. All together your talking a $50 investment for a lot of peace of mind.

u/johncrist1988 · 1 pointr/pcmasterrace

GC Extreme has a thermal conductivity of 8.5 W/mK which puts it right up there with AS5. Sounds pretty solid to me!

u/iLefter1s · 1 pointr/laptops

For the undervolt you can easily push easily,

-120mV core ( moving to -150 you need to check for stability )

-100mV cache ( -120 may cause instability )

-100mV iGPU core

-100mV system agent

Make a throttlestop profile and make it start automatically. There is a ton of tutorials.

You can cut down the clock speeds since you cant see benefit above 3.8ghz .

Make 4.0ghz single core , 3.9ghz dual core , 3.8ghz quad core , or lower in a similar 0.1ghz decrease.

These downclocks will get the higher undervolting values possible , like -180 core.

​

In terms of significance Undervolt = Thermal Paste > Cooling Pad

​

​

Ok , start by watching these videos.

https://www.youtube.com/watch?v=d03OQFx1b-Q ( @around 5min . )

https://www.youtube.com/watch?v=biPpnH7KnXo full walkthrough of the previous model.

https://www.youtube.com/watch?v=aPUCYUiGWZQ general repaste video.

​

Kryonaut thermal paste

https://www.amazon.com/Thermal-Grizzly-Kryonaut-Grease-Paste/dp/B00ZJSF5LM/ref=pd_cp_147_2?pd_rd_w=6QWwH&pf_rd_p=ef4dc990-a9ca-4945-ae0b-f8d549198ed6&pf_rd_r=2VQK9HCAAZZ9TZSYVQEK&pd_rd_r=ad661e5a-d062-4f33-a32c-3e1a34902b3b&pd_rd_wg=l7wzh&pd_rd_i=B00ZJSF5LM&psc=1&refRID=2VQK9HCAAZZ9TZSYVQEK

​

Gelid GC thermal paste.

https://www.amazon.com/GELID-GC-Extreme-3-5g-tooling-Conductivity/dp/B002P5W4RU/ref=pd_sbs_147_1/132-5597144-8566058?_encoding=UTF8&pd_rd_i=B002P5W4RU&pd_rd_r=0c20f2a1-7946-43c7-aa06-0c33d07e377a&pd_rd_w=aSR0f&pd_rd_wg=d95GD&pf_rd_p=d66372fe-68a6-48a3-90ec-41d7f64212be&pf_rd_r=SM1GYT0DYEXKHPTNBR90&psc=1&refRID=SM1GYT0DYEXKHPTNBR90

u/TaedusPrime · 1 pointr/sffpc

For my install i used the following:

https://www.amazon.com/NZXT-Technologies-Bracket-Cooling-RL-KRG10-W1/dp/B00ITTFNW4/ref=sr_1_1?ie=UTF8&qid=1468265285&sr=8-1&keywords=kraken+g10

Linked the white one but there is black, red and blue for a small increase in price.

https://www.amazon.com/Corsair-Hydro-Quiet-Liquid-Cooler/dp/B009VV56TY/ref=sr_1_1?ie=UTF8&qid=1468265342&sr=8-1&keywords=h55

https://www.amazon.com/Gelid-Solutions-GC-Extreme-Compound-TC-GC-03-/dp/B002P5W4RU/ref=sr_1_1?ie=UTF8&qid=1468265363&sr=8-1&keywords=gelid

Here is the list of compatible water coolers if you want to hunt for a cheaper or different option than the h55:

https://www.nzxt.com/products/kraken-g10-white

The EVGA hybrid option is now available as well:

http://www.evga.com/Products/Product.aspx?pn=400-HY-5188-B1

This option is aesthetically nice and clean but at $120+plus and tax and shipping it's pretty expensive.

I can post pics of mine soon. Install is pretty straight forward, it can feel a bit nerve-racking at times taking a gpu apart but it's not as bad as you would think.





u/MRThundrcleese · 1 pointr/techsupport

Thermal Grizzly Kryonaut is pretty much the best. Gelid GC-Extreme is the best bang for your buck

u/nudelete · 1 pointr/Nudelete

>-Previous threads here-
>

>
>Objective:
>Going back to the original - The $500 build from /u/JDM_WAAAT. Since then, many of those parts prices have drastically increased in price or are unavailable. So new objective, build it better, for less! And oh man did we ever.
>
>
>Rules for buying used server-grade parts on eBay:
>
>1. Buy from highly-rated, reputable sellers
>2. When "Or best offer" is available, use it. Sellers will likely discount parts, often up to 30%.
>3. Shop around. There are many resellers selling the same exact parts on eBay, find the one with the best price.
>4. Scrutinize the details of the auction. For example, make sure CPU stepping / revision is correct to what you need. Make sure components are listed as functioning and not "for parts only".
>5. Do not, under any circumstances buy QA/QC/QS/ES labled CPUs. Only buy official used / refurbished Intel Xeon CPUs. Chips with this label are not guaranteed to work, and might break functionality with something as simple as a BIOS update.
>6. Check sources other than Ebay. /r/buildapcsales can be a huge help with this. Amazon or Newegg often have huge sales on some of the new parts. Shop around people!
>
>Build
>
>http://i.imgur.com/X1NzK7Z.png
>
>http://i.imgur.com/r2d3lQp.png
>
>http://i.imgur.com/AHQJmto.png
>
>Type|Item|Price (eBay) | OBO? | OBO price
>:----|:----|:----|:---- |:----
>CPU | 2x Intel Xeon E5-2650 2.00GHz, 8 core 16 thread | Incl w/ MOBO | |
>Motherboard | Supermicro X9DRi-LN4F+ Dual Socket | $281.98 | YES | $260
>RAM | 16GB (4X4GB) DDR3 ECC REG x 2 | $29.89 ea | YES | $25.00 ea
>CPU Cooler | 2x Arctic Freezer i11 CO | $19.22 ea | |
>PSU | EVGA 450W BT | $24.99 | |
>EPS Splitter | 8 Pin to Dual 8 Pin EPS Splitter | $6.00 | |
>24 Pin Extention | 12" 24 Pin Power Extention | $9.99 | |
>Case | Phanteks Enthoo Pro | $79.99 | $15 MIR | $64.99
>Thermal Compound | Gelid GC Extreme | $12.99 | |
>Other | Tax, shipping, fees | $3.60 | |
>Total | | $517.76 | after OBO | $471
>Optional Extras | Sata cable 6 pack | $7.49 | |
>Optional Extras | Sata power splitter | $6.27| |
>
>---
>
>About this build:
>
>There you have it. If you recall, the original $500 build actually used this same CPU. BUT ONLY 1!. Here, we used 2, gave it more RAM, and all for over $50 less!
>
> General: I recently completed almost this exact build, same mobo, case, etc. Just ended up with different RAM config, and used dual E5-2630L CPU's that i got for a steal. This build will be using two Intel Xeon processors on Intel Socket 2011 motherboard with Quad-Channel DDR3-ECC RDIMM memory. It does not include specifications for SSD or HDD.
>
CPU: The Intel Xeon E5-2650 is a high power, 8 core, 16 thread CPU that came out Q1 2012. 2.0Ghz clock, 2.8 Ghz turbo. It has a counterpart, the E5-2600L series who are also 8 cores, but low power. If you don't need quite as much Passmark power, these are also a power saving option at a slightly lower price point. MSRP when it was released was around $1100.00 USD Each. Plex Transcoder has true multi-threaded support and will take advantage of all 32 threads. So while this CPU might not be clocked as fast as what most of you are used to, the sheer amount of cores/threads will more than make up for it. Dual E5-2650's will score 15000 on passmark. Another thing to consider is that since the CPU is so cheap, you won't have to worry about it when it comes time to upgrade in the future. You can replace it with any V1 or V2 E5-2600 series cpu's. Dual E5-2660 V2, 10 core 20 thread, 2.20GHz base / 3.00 Ghz turbo in the future for about +4000 extra passmark score.
> Motherboard: Supermicro X9DRi-LN4F (Link to Supermicro Product Spec Page) This motherboard has dual 2011 sockets with a whopping 24 DIMM slots. With this build we'll be using only 8 of those available DIMMS, so there's a possible future upgrade. 6 SATA ports are standard, along with 2 SAS ports, for a total of 14 available SATA connections. Quad Gigabit NIC is also standard, plus IPMI.
>
RAM: Here, we're using 8x4GB DDR3 ECC REG for quad channel support, and a total of 32GB of available memory. 32GB is a good value here. Another 2 sets would fill all 24 slots, for a total of 96GB.
> CPU Cooler: There's not much to say here. It's compatible, it's quiet, and it works. We won't be overclocking, so there's not much to worry about so long as it works. Also designed for continuous operations.
>
PSU: It's cheap, powerful enough, and works. Not much more to say.
> Case: This case has full SSI-EEB+ (E-ATX with specialized mounting) support. Supports 6 3.5" hard drives two 2.5" SSDs, and two 5.25" bays natively. It's an all-around wonderful case, and it's really well-constructed (I have one, it's great). Also, one of the few cases that actually will fit this massive MOBO. In the front is a MASSIVE 200mm intake fan. Didn't even know they made them that big.
>
Splitter/Extension These are necessary with the parts listed above to work. The power supply listed only has 1 8 Pin EPS connection for the CPU. Since we have 2, need a splitter. If you use a different PSU, check on the # of EPS connections. If it has 2, this part is not necessary. This board BARELY fits in the case. I know, I have both! Here's some pictures to show. Because of this, wiring the power can be a bit tricky, and to get it done in a clean way, need the 12" extension.
>
Thermal Paste This is the best non-liquid metal thermal compound out there, hands down.
>
>Cautionary notes, other details
>
>1. Server equipment is stripped down to the bare minimum for compatibility and reliability. Because of this, features you are used to having might be missing - for example, some server motherboards don't have onboard audio. Also, most will use VGA onboard.
>2. Use a SSD for your host OS. This is likely where your Plex metadata will live, so if you're going to generate thumbnails and you have a sizeable library, make sure to get an appropriate size. I have about 20TB of media with thumbnails turned on, and 500GB is starting to feel tight. About 250GB is a good start for most people.
>3. Familiarize yourself with the BIOS options. Some may be different than consumer models. Make sure Hyper-threading is turned on in the BIOS. When in doubt, clear the CMOS / reset to default. You should verify that all 24-threads are showing in your host OS.
>4. Almost any OS will work. Includes ESXI, unRAID, FreeNAS, Linux, and Windows of course.
>5. Evaluate your RAID options. This motherboard has capabilities for onboard RAID, but that isn't for everyone.
>
>Upgrades, other parts
>
>1. Cheap storage in the form of $33 refurbished 2TB Hitachi Ultrastar hard drives. These are Enterprise level drives, great for use with RAID arrays.
>2. Sell the pair of E5-2650's & get Dual E5-2660 V2, 10 core 20 thread, 2.20GHz base / 3.00 Ghz turbo for 19,000 Passmark score. At time of posting these were $249.99 OBO w/ free shipping, extremely great value currently. If you're more concerned about power consumption, consider a pair of E5-2650L's for $41.50 each OBO at the time of this post, for a sweet ~14k passmark at only 70w TDP each.
>3. MORE RAM!
>4. Liquid cooling - If you plan on upgrading to V2's this is a good idea. Can get Corsair H55's for $60 each.
>5. DO IT ALL! If you want more power right now, sell the CPU's that come with the mobo for ~80 and grab a pair of E5-2660's for $240. Triple the RAM for an extra $100. Liquid cool the PSU's for an added $80. Finally, upgrade to a 550w semi modular 80+ gold psu for an extra ~$30 (one's on sale @ Newegg for $55 after MIR currently). Grand Total: around $840.
>
>FAQ
>
> Q: Aren't used parts unreliable?*

u/motodoto · 0 pointsr/ffxiv

Any temperature and intel processor reaches that would cause damage to it will force the PC to shut-off. What temps are you seeing? Use core temp.

http://www.alcpu.com/CoreTemp/

If you aren't afraid to do it, opening up the surface pro, blowing it out with a dust can or Metro Data Vacuum, and then reapplying high-end thermal paste to the GPU and CPU heatsinks, will probably help a lot.

https://www.ifixit.com/Guide/How+to+Apply+Thermal+Paste/744

u/feanor512 · 0 pointsr/Amd

Gelid GC-Extreme is way better than MX4.