Reddit reviews General Finishes High Performance Water Based Topcoat, 1 Quart, Satin
We found 4 Reddit comments about General Finishes High Performance Water Based Topcoat, 1 Quart, Satin. Here are the top ones, ranked by their Reddit score.
Do not apply clear topcoats over bright white paint, as yellowing may occur due to a reaction to the substrate. Light color paints may also experience yellowing due to topcoat application, but it will less noticeable.The hardest, most durable consumer polyurethane top coat on the market todayDry Time Between Coats is only 1 to 2 HoursInterior use only
I recently bought a bandsaw : Rikon 14" Deluxe so I needed a project that required a bunch of resaw work. What better than a chest of drawers?
Overall this chest of drawers took around 70 hours to complete, mostly because I didn't know what I was doing. I put a few layers of General Finishes Satin Polyurethane on all sides and the top.
I made it completely from scratch, and it was intended to just be a practice piece. I've never made drawers before, and never resawn wood before, so it was a great learning experience.
Comments? Criticisms? Let me know what you think!
I understand your wife's aesthetic concerns; a white kitchen really does brighten up a space, and the old wooden decor is extremely outdated and makes you feel like you're in the 80's nowadays. I recently repainted my kitchen cabinets as well: https://imgur.com/a/8zw3SZo
​
I bought General Finishes milk paint. You don't need any other base coat or stripping original paint; just put it right on top the old wood. https://www.amazon.com/gp/product/B00JUP1WLM/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
​
Topped it off with some topcoat: https://www.amazon.com/gp/product/B001DSZ3C8/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
​
Total paint cost about $160, and the additional paintbrushes/trays $30, so all in less than $200. It took me about 5 full (~8 hour) days; definitely a lot of work, but worth it for the value. Super happy with the end result given how cheap it was.
You might check out General Finishes Waterbased Poly - Non-affiliated Amazon link.
There are others but this one gets good reviews. The only downside to WB poly is the lack of depth of color in the finished products over oil based. Make some samples before you finish your desktop.
Sweet! Is this basically what I'm looking for?
https://www.amazon.com/General-Finishes-QTHS-Performance-Topcoat/dp/B001DSZ3C8/ref=sr_1_6?s=hi&ie=UTF8&qid=1493682698&sr=1-6&keywords=general+finishes