Reddit Reddit reviews General Finishes Wood Bowl Finish, 1 Quart

We found 4 Reddit comments about General Finishes Wood Bowl Finish, 1 Quart. Here are the top ones, ranked by their Reddit score.

Paint, Wall Treatments & Supplies
Tools & Home Improvement
Household Polyurethanes, Shellac & Varnish
Household Finishes, Sealers & Stains
General Finishes Wood Bowl Finish, 1 Quart
Safe topcoat on wooden bowls, cups, spoons, decorative wood countertops or other wood surfaces that come into contact with foodCreated to be safe on wood surfaces that contacts foodNot for actively used butcher block counter tops that are used for chopping and cutting
Check price on Amazon

4 Reddit comments about General Finishes Wood Bowl Finish, 1 Quart:

u/CropDustingBombShell · 4 pointsr/Norse

Sure! I looked into it a while back for a project, but I never got around to the project.
Here's a website with direction directions:
http://www.personal.utulsa.edu/~marc-carlson/horn/dhorn.html
And here's the varnish:
https://smile.amazon.com/General-Finishes-SBQT-Finish-Quart/dp/B001DSXD7A/ref=mp_s_a_1_3?keywords=salad+bowl+varnish&qid=1562788235&s=gateway&sr=8-3

u/Beerandababy · 1 pointr/finishing

I would be very careful with your decision. A countertop can be considered a food-contact surface, yes? You should strongly consider a food-grade sealer. Most sealers are highly toxic.

I recommend using a food-grade varnish. It’s far more durable and long-lasting than mineral oil, but not as much so as other sealers.

[Here is my favorite for cutting boards and such. ](General Finishes SBQT Salad Bowl Finish, 1 quart https://www.amazon.com/dp/B001DSXD7A/ref=cm_sw_r_cp_api_i_lJn9AbRCA13JH) It isn’t cheap, but eating toxic substances won’t end up being cheap either.

Edit: hopefully a working link?

Btw: it’s waaaay cheaper anywhere else but amazon, for some reason.

u/klcrouch · 1 pointr/woodworking

General Finishes “wood bowl finish”

GF products are excellent.


General Finishes SBQT Wood Bowl Finish 1 Quart https://www.amazon.com/dp/B001DSXD7A/ref=cm_sw_r_cp_api_i_cKb1DbBH7NM9C

u/Austingd · 1 pointr/turning

Gerneal Finishes Salad Bowl Finish

It recommends 3 coats, but I think I ended up with 5, sanding with finish grade steel wool between coats.

This is the second one I made, the first was for my oldest son about 4 years ago. The finish faded in luster considerably, so I thought adding a few more coats would help prolong the gleam.