Reddit Reddit reviews Glass Printer Bed 235x235x4.0mm Borosilicate Glass 3D Printer Glass Print Platforms for Ender 5/Ender 3/Ender 3 Pro

We found 12 Reddit comments about Glass Printer Bed 235x235x4.0mm Borosilicate Glass 3D Printer Glass Print Platforms for Ender 5/Ender 3/Ender 3 Pro. Here are the top ones, ranked by their Reddit score.

Industrial & Scientific
Additive Manufacturing Products
3D Printer Parts & Accessories
3D Printer Accessories
Glass Printer Bed 235x235x4.0mm Borosilicate Glass 3D Printer Glass Print Platforms for Ender 5/Ender 3/Ender 3 Pro
【Borosilicate Glass】This material has Ultra-low thermal expansion,heat resistant and high temperature shock resistance.Thick 3.8mm glass plate will not warp or bend under heat.【Worked Perfectly】This Printer Glass bed is amazingly flat.Smooth flat surface improves the quality of your 3D printing, for consistent results.【Easy to Clean】Just wash it off with water, clean with glass print bed cleaner, reapply a thin layer 3d printing solid glue and enjoy.【High Quality】 Square printer glass are safe and easy to handle.All edges have a nice smooth round over and there are no chips or scratches.Fits for the Creality Ender 3, Ender 3X,Ender 3 Pro, Ender 5,Geeetech A10,DC-01,CR-20,CR-20 Pro.【12 Months Warranty】100% Dcreate Genuine Brand New - Original packaging, premium quality. 100% hassle-free replacement guarantee within 12 months warranty and replacement for quality issue.
Check price on Amazon

12 Reddit comments about Glass Printer Bed 235x235x4.0mm Borosilicate Glass 3D Printer Glass Print Platforms for Ender 5/Ender 3/Ender 3 Pro:

u/TheSameNameTwice · 5 pointsr/ender3

There wasn't too many that affect the quality of the print, but here's the mods I currently have:
___

BL Touch

Borosilicate Glass

Extruder Filament Guide (for TPU)

TPU Feet

Fan Cover

u/meleshik · 3 pointsr/PrintedMinis

i have an ender 3 pro and after saying no to any upgrades I finally started to see what everyone is talking about 6 months down the road. here is a list of things that you will see a lot of you tubers tell you to replace. the YouTube channel Tomb of 3D Printed Horrors is a great resource for everything about the ender 3.

  1. new boden tube and couplings that are alot better to use then stock https://www.amazon.com/gp/product/B07DC594D6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
  2. THIS IS A MUST HAVE! a new metal extruder (eliminates a crap ton of extrusion issues) https://www.amazon.com/gp/product/B079JZ374W/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
  3. Glass bed (best bed adhesion with 0 cleanup) this is optional but does solve a ton of issues down the road https://www.amazon.com/gp/product/B07JKGNB6W/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
  4. extra nozzles in a variety of sizes (not needed but nice to play with different sizes and to clear any clogs fast you can just replace the nozzle....i run .2, .4, and .8) https://www.amazon.com/gp/product/B07JPZ7TNX/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

    the YouTube Chanel Tomb of 3D Printed Horrors has a step by step build guide for your ender 3 ( i used it for mine) he will recommend most of this list as well. He also has other videos on the slicer settings you will use for Cura. for D&D models you can use this google doc list https://docs.google.com/spreadsheets/d/1PemvBH7LC-hm4KoeA8OXVu5_k963Vpmw7kOEA_1tzWs/edit?pli=1#gid=0
u/jvkaiaer · 3 pointsr/ender3

Yes my friend

Gizmo Dorks PEI Sheet 3D Printer Build Surface 235mm x 235mm (9.3" x 9.3") with Preapplied Laminated 3M 468MP Adhesive for Creality Ender 3 or CR 20 | Made in The USA
https://www.amazon.com/dp/B07GSJSDWR/ref=cm_sw_r_cp_apa_i_gbsPDbPNKDNM9

Glass Print Bed Borosilicate Glass 3D Printer Glass Print Bed 235x235x3.7mm for Ender 3 DC-01 Glass Print Bed Borosilicate Glass https://www.amazon.com/dp/B07JKGNB6W/ref=cm_sw_r_cp_apa_i_T-sPDbX4FQ8EG

u/Shenkoe · 3 pointsr/ender3

If I am understanding correctly, the prints stick everywhere else except the middle. This could be from the heated bed not being completely flat, from either a manufacturer defect, heating the bed can cause it to flex slightly, and also the act of leveling with 4 points will cause stress to the bed and cause it to not be flat.

If you want to resolve the issue there are a few thing you can do. First I recommend getting a glass bed of some kind. I use this: https://www.amazon.com/Glass-Print-Borosilicate-Printer-235x235x3-7mm/dp/B07JKGNB6W/ref=pd_bxgy_328_2/146-3360479-3249561?_encoding=UTF8&pd_rd_i=B07JKGNB6W&pd_rd_r=1be203f4-8159-11e9-8887-9b31b6cb4217&pd_rd_w=QkaU5&pd_rd_wg=lhVMV&pf_rd_p=a2006322-0bc0-4db9-a08e-d168c18ce6f0&pf_rd_r=MJKHHJRB1R0V6D2Q2C61&psc=1&refRID=MJKHHJRB1R0V6D2Q2C61

with this PEI sheet: https://www.amazon.com/gp/product/B07GSJSDWR/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1

​

Second you can do a bed conversion from 4 corners to 3-point leveling. Check this guide by Makeitmakeitmakeit for more info: https://www.thingiverse.com/thing:3415460

you will need this, made by rrwrex, if you do the conversion: https://www.thingiverse.com/thing:3193722

​

This is a make of my conversion which I have done on 2 Ender 3s and no longer have to level unless I mess with the bed: https://www.thingiverse.com/make:636770

​

Also check this guide out here tons of good info: https://www.thingiverse.com/thing:3574369

u/Paral0xy · 3 pointsr/3Dprinting

Build plate is tearing up a little when you remove the print.

I suggest purchasing a glass replacement to go over the top of your build plate. Note: You'll have to calibrate your Z-axis a little unless if you get super lucky and the glass plate is exactly the same thickness as your current plate. Amazon has one for $20

u/opiate82 · 2 pointsr/3Dprinting

I use a borosilicate glass bed on my Ender 3 and do not use anything like that on it. Did not rough it up either. I just clean it with some alcohol before each print and have no issues with adhesion or removing my prints.

It takes a bit of work to dislodge my print immediately after printing, but if I let the bed cool off for like 5 minutes the print comes loose all by itself. So far I've only used PLA, not sure if other materials will be different.

*Edit- Link to bed I use: https://www.amazon.com/gp/product/B07JKGNB6W/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

u/ButtPlugs4Kids · 2 pointsr/ender3

i ended up buying this glass bed. Overall its pretty good. Just use purple glue stick you can buy anywhere and youll be fine. albeit for me i need to call in NASA engineers to get mine off as well. :/

​

https://www.amazon.com/Glass-Print-Borosilicate-Printer-235x235x3-7mm/dp/B07JKGNB6W/ref=sr_1_5?crid=3C42WXXA97BWB&keywords=ender+3+glass+bed&qid=1569282569&sprefix=ender+3+glas+bed%2Caps%2C219&sr=8-5

u/zheke91 · 1 pointr/ender3

Hey I also new on this, got my printer a month ago, I was super exited as everyone here when receive their printer, I read a LOT while waiting for the printer, so I heard that the stock bed springs are crappy, so I ordered this ones FYSETC Bed springs, also ordered the Aluminium Extruder feeder, and read about the leveling, the paper sheath method, which I think you should already heard about, I did it at the first time the printer gave me a nearly perfect first print (demo dog) , after a few prints and on my third print I came home just to find a mess on my printer, so I did my research again, find out it was bed adhesion, and find out that the best way was glass bed + PEI sheet was the best option, while waiting to arrive I tried to clean the stock bed sheet with mineral spirits (did have rubbing alcohol) but it worsened the adhesion, so I used one adhesion sticker that comes with the overture filament, and again flawless adhesion, at least for the first 4 prints, then again the frustration, I tried some glue stick and worked but it leaves a mess on your print so I decided to try painters tape directly onto the aluminum bed (which lucky for me it is perfectly flat) this is the best adhesion I have tried, problem is also makes a mess with the down face of the print, Finally mi Gass-PEI arrived, (3 days ago), it has a great adhesion but is not perfect, also you have to raise the Z limit switch to compensate the 5~ mm of Glass-PEI, find out that it isn't perfectly flat it has a good adhesion and leaves a very smooth down face, but at some section it does't sticks well and leaves artifacts on the down face, I'm currently working to fix this.

Sorry for the long post, need to talk about my frustration and let you know you are not alone on this, once you manage to make a good print is very satisfying, I have a PETG filament waiting to be used but I don't think is a great idea to try it until a learn more about 3D printing and the Ender.

u/EntropyWinsAgain · 1 pointr/3Dprinting

Not OP, but here is the one I got a few weeks ago. Works fine.

https://www.amazon.com/gp/product/B07JKGNB6W/

u/bigdrock44 · 1 pointr/ender3

I struggled with adhesion for the first couple weeks of printing. Then I swapped my stock bed for a glass + PEI combo. Got the flatness of the glass + the adhesion of the PEI. Once the plate cools down a few degrees, the parts come right off. No need for sticky hairspray to get things to stick, and no need to put the bed in the freezer to get things to unstick. Best upgrade I’ve made on my ender 3 (~$30 total). Always wipe down with isopropyl alcohol in between prints for best adhesion.

Tip: I also recommend gently wet sanding the PEI. Helps with adhesion and creates a very nice matte finish on the first layer.

Glass Bed:
Nearly Natural 4855 35in.... https://www.amazon.com/dp/B07JKGNB6W?ref=ppx_pop_mob_ap_share

PEI:
Gizmo Dorks PEI Sheet 3D Printer... https://www.amazon.com/dp/B07GSJSDWR?ref=ppx_pop_mob_ap_share

u/kennyog · 1 pointr/3Dprinting

I got this one. It has good reviews and the price was right.

I think most on Amazon are probably similar.

Glass Print Bed Borosilicate Glass 3D Printer Glass Print Bed 235x235x3.7mm for Ender 3 DC-01 Glass Print Bed Borosilicate Glass https://www.amazon.com/dp/B07JKGNB6W/ref=cm_sw_r_cp_apa_i_SDOEDbJSNRTST

u/TheRealSattious · 1 pointr/FixMyPrint

What are you using to level the bed? Also where are you leveling it to? (above the bed screws are the right spot) I use a piece of receipt paper folded in half to level it.

It may be worth using a bed level gcode to assist with the human error or placement problems)

Also the stock springs may be bad these should help with the frequent bed leveling.

A glass bed may also help with adhesion with these