Reddit reviews GLOTRENDS Universal M.2 Heatsink NVME Heatsink SSD Heatsink for 2280 M.2 SSD with Silicone Thermal Pad
We found 7 Reddit comments about GLOTRENDS Universal M.2 Heatsink NVME Heatsink SSD Heatsink for 2280 M.2 SSD with Silicone Thermal Pad. Here are the top ones, ranked by their Reddit score.
M.2 Heatsink fit for 2280 size (22x80mm) M.2 NVME SSD, like Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970PRO, etc.GLOTRENDS NVMe Heatsink passive heat dissipation solution full covering 2280 NVMe SSD(Aluminum Heatsink and Thermal Silica Pad) with 5°C- 15°C Cooling Effect (Varies depending on the environment). Economical and practical cooling method keep NVMe SSD at 50c level even long time loads, No more worry about suddan throttle. We offer 2 ways for fixing aluminum heatsink: 1）Metal Clamps; 2) Rubber Bands.2280 Heatsink Main Body: Aluminum Alloy, Silver Plating, Anodic Oxidation Surface Treatment.Groove design greatly Increase the Heat Dissipation Area.Heat Conductive Material: Nano Heat-conducting Silica Gel Pad (Thickness: 1mm). Good Ductility, Compatible with Uneven Surfaces. Low Viscosity, Easy to RemoveFull refund within 30 days for whatever reasons. No Questions Ask! 12-month warranty, covering all quality problems – we’ll offer you free replacement or full refund. Just email us for whatever issues, you will receive friendly customer service within 24 hours and we’ll save your time from product returning.
Apex on battery.
I have all Dell and Intel software enabled and up to date except for Dell Support Assist(unistalled because it was re-installing SmartByte), SmartByte, Killer Network and Rivet services are all stopped and disabled.
CPU/GPU was re-pasted with this.
Current CPU UV, your mileage may vary.
GPU OC/UV @0.700mV, 2nd lowest performance state.
GPU OC/UV Highest Performance State @0.813mV, it says @1733mhz but in reality GPU sits @1721mhz, this will greatly reduce GPU temps and since the heatsink is shared that includes the CPU as well.
Extra Sauce when playing plugged. Helps with random shutdowns and BSODs.
At all times even on battery, my own preference.
This is all on the latest BIOS, i've always updated it.
My max CPU temps hover between low 80c to mid 70's depending on game while the CPU sits @3.9GHz and GPU barely hits 72c at a room temp of ~34c. Tropical humid weather may simulate yours since you are indian?(wild guess sorry if your not and it's offensive D:).
Bonus round:
My laptop came with the AUO panel and it's OC'ed to 108hz LCD Reduced.
I barely use the Realtek's sound drivers, mainly use a wireless headset and bluetooth for speakers, to cope with the DPC latency issues.
Download HWInfo64 and keep an eye on the m.2 ssd and the PCH temp. Those can alter performance plugged or unplugged.
m.2 ssd heatsink link if needed.
This is not necessary but i had to do this, Dell's fault. MAY VOID WARRANTY.
If i can help with anything else, lemme know.
​
Edit: some fixes and clarity.
Yep, I just installed the same drive in mine a few days ago, works great as my game drive :) . mY os DRIVE IS A 512GB NVMe and then the WD is my primary game drive. Spinning HDD is extra game storage / personal files.
Not that it needs it, but one of these will also shave about 5-10c off of the temps as well.
not having a ghost case (yet), but i achieved -10°C with this nvme heatsink
Yeah I'm from the UK too. I bought this one, however, it hasn't arrived yet.
This one has been recommended over at the NBR forum and apparently can fit in either slot.
personally I would go with an AMD processor (2700x 3700x or 3800x) with an msi tomahawk b450mobo(great OC performance). and change your 1tb ssd to 1tb nvme (also made by crucial - be aware that using the M.2 disables 2 sata ports no matter what chipset you go to. just some food for thought.
I would also suggest avoiding the h510 (case) as its been known to be a bit of a incubator being as the front panel acts as a show piece allowing next to no air through it.
the meshify C is the best choice for cost/thermals/looks imo but thats all preferance - if youre going with the 510. set your radiator mounted to the top in "pull" configuration. (or your cpu will run hot guaranteed)
also I would get the 2060Super OR 2070 OR 2070Super over the 2080TI as the 2080ti is just a refresh 1080ti with its shader cores enabled, and wait for their real introduction of a 4k capable card (with min fps above 60 which no card can do currently in AAA games.
as the 2060super/2070(s) will handle 1440p (@60/80fps) and vr titles with ease (I picked up the 2070 on sale for $640~ after tax and shipping). and it crushes in VR (I have the RiftS) I also get 200~ FPS in gtaV on 1080p max and 160~ in ark and 400~ in LoL
Edit: (link)https://ca.pcpartpicker.com/list/RPzdmg
also to fix "thermal" issues on m.2 drives buy this little heatsink. it comes with a thermal pad aswell https://www.amazon.ca/dp/B076YZMQR5/ref=cm_sw_r_cp_apa_i_JgzYDbQN0G9TR
I got a phison e12 drive, the Sabrent Rocket with the same controller. I ran it stock and recorded temps of 70c on load. I put on a smaller heatsink than the one you linked. This one: https://www.amazon.com/GLOTRENDS-NVMe-Heatsink-M-2-2280/dp/B076YZMQR5
After the install, and 20 mins of stress testing, I was at 50-60c, so I dropped 10-20c, for $5 dollars. Theres a youtube video of people installing it and running similar tests. Note that the thicker aluminum ones seem to trap hot air easier for some reason.
I got mine yesterday. The included heatsink really is a joke -- just a thick piece of aluminum foil with adhesive on it. I didn't even bother trying it.
Running the drive naked, I was getting idle temps around 45°C, and load temps in the upper 50s to near 60°C. (Mind you, I didn't spend much time testing the temps on the naked chip, so they might have settled a little higher if I tested for more than 15-20 minutes).
I bought this heatsink, which knocked about 10°C off the temperatures. Idle temps were 35 to 40°C. Load temps were in the upper 40s to near 50°C.