Reddit Reddit reviews GSI Creos Gundam Marker Value Set -GM01&02&03- (Black, Gray, Brown)

We found 27 Reddit comments about GSI Creos Gundam Marker Value Set -GM01&02&03- (Black, Gray, Brown). Here are the top ones, ranked by their Reddit score.

Toys & Games
Hobbies
Hobby Tool Painting Tools
Hobby Building Tools & Hardware
GSI Creos Gundam Marker Value Set -GM01&02&03- (Black, Gray, Brown)
gundam makers
Check price on Amazon

27 Reddit comments about GSI Creos Gundam Marker Value Set -GM01&02&03- (Black, Gray, Brown):

u/yamiyaiba · 5 pointsr/Gundam

Welcome to the hobby, friend! Here's a few useful tidbits of info for you.

None of the Gundam kits from the last 20 or so years need glue. That's a standard feature across pretty much every Gundam model kit. So in that regard, feel free to pick any design you like. Not all kits are created equally, but a quick search across this subreddit will help you figure out if the kit you're looking at happens to be hot garbage (and there are a few that are).

To more directly answer your question, the starter set uses an older model of the classic RX-78-02 Gundam. The Revive version is a much, much better model. You can find it here on Amazon.

A panel lining pen (or pens) are not required, but certainly make for a better final product. They're pretty cheap on their own, and generally you'll want at least grey and black, and possibly also brown. Alternatively, you can get a pack of all 3. You'll also want so basic q-tips/cotton swabs to clean up your panel looking.

You're also going to need some nippers. Nippers come in a range of types, qualities, and styles. The best nippers are single sided (that is, one side is a blade and the other is flat). These, the infamous Godhands are hands down the best nippers on the market. They're expensive as shit, but worth every penny. If you're on a medium budget, Tamiya's nippers are the next best option. There are cheaper nippers out there, but they're gonna come with significantly inferior results. That said, a lot of that can be addressed with...

A good hobby knife. You'll be just fine with a simple, cheap X-Acto knife, but there is (in my opinion) a better option. My personal favorite, the Tamiya Design Knife. It's got a slightly smaller blade, which will let you get into tighter spaces with it. It also comes with a metric crapton of replacement blades. You'll want to replace the blade every couple kits, but there's a bunch of them in there. There same container that holds the replacement blades even has a second chamber to dispose of your old blades into.

Finally, you may want some fine pointed (possibly angled) tweezers for decal application. Finger oils can screw up the adhesive on the stickers. You can pass on this starting off most likely, but you'll want to get some eventually.

TL;DR, the starter pack isn't the best option. If you're after the granddaddy Gundam, get the Revive. Otherwise, pick your favorite design. The newer the kit, the better, generally speaking. Look at the copyright date on the box cover to see. Bottom left corner.

You're going to need nippers, which can get pricey, but the cost is worth it. Start with a mediocre pair, and upgrade to the Godhands once you're committed to the hobby. You'll need a knife, too. You can cheap out on this one, but there are better options IMO.

Optionally, get tweezers, panel lining pens, and cotton swabs.

Edit: other good starter kits

HG Barbatos is a great kit. The build process for IBO models is a bit different than other gunpla, though, as they have a quasi-inner frame.

HG 00 Gundam is another great starter. It's also the first kit I ever panel lined, and it was a great starter for that.

If you're wanting a Zaku, the HG The Origin Zaku II Type C is probably the best Zaku kit released to date in 1/144 scale.

Finally, I'd feel bad for not suggesting my all time favorite HG build. It was just a fun, fun kit to make and to pose. The HG 1.5 Gundam. It's got some really cool gimmicks and, unique colors, and an awesome design.

u/SweetJT · 4 pointsr/Gunpla

I noticed that you didn't add the sticker on the waist. I would recommend adding it with a toothpick and smoothing it out with a cotton swab. Also, invest in a set of Gundam Markers for panel lining.

​

You can find those here.

​

Otherwise, great job on the modeling!

u/Type43TARDIS · 3 pointsr/Gunpla

I have found that the easiest (and cheapest) way to up your model kit game is to panel line them. It makes the color separation pop way more, and helps define the proportions of a kit much better. A three pack of the panel linking markers are on Amazon for 5-7$ usa (link below). I recommend using the gray marker for white parts, brown for red orange gold and yellow parts, and black for blue gray and silver parts. The markers last a very long tine as well.

Another way is to buy some sanding sticks (10$ roughly for a 4 pack) and work on carefully removing nub marks. It will really improve the final presentation on the finished model. Start with a lower grit stick to remove the nub, and then increase the grit to polish away the scratches. If done correctly (I'm still working on this too) it will look like the nub was never there.

I Hope this helps, from one modeler to another.

Panel lining markers:

GSI Creos Gundam Marker Value Set -GM01&02&03- (Black, Gray, Brown) https://www.amazon.com/dp/B00HY93GHY/ref=cm_sw_r_cp_apa_i_xt-2DbKF7CZZR



Sanding sticks:

Squadron Products Value Pack Sanding Stick https://www.amazon.com/dp/B000CDR5K8/ref=cm_sw_r_cp_apa_i_AC-2Db3ZFSJ3K



Edit: also the panel lining will help the paint job pop. In addition I'd saw use multiple coats from the gundam makers if possible.

u/hero_kohai · 3 pointsr/Gunpla

They are transparent stickers and dry transfer decals. for panel lining i used these gundam markers. they're pretty neat.

u/penguin055 · 3 pointsr/Gunpla

By Zaku Revive, did you mean one of the Origin kits or the Gouf Revive? Because I don't believe they have released a Zaku Revive yet. As for what to build next, pretty much any modern HG kit is going to be easy to assemble, but the Revive kits are some of the best out there. Unfortunately, there is no Guntank Revive, but the Guncannon Revive is a great kit, and the Zeon side has the Gouf Revive and Gyan Revive so far.

As for panel lining, you just need some lining markers or pens (I suggest these). All you need to do is use them to fill in the panel lines on the kit and maybe some of the other recesses (you can look at photos of the kit with panel lines in the instruction manual for guidance) and then use some Q-tips to wipe off the excess.

u/crazypipo · 3 pointsr/Gunpla

Assuming you will start with panel lining on bare plastic first.

----

  • For beginners, a fine point Gundam Marker is the best to start. Any mistakes made with this can be cleaned up with nothing but q-tip...or even your thumbs. All though, it will not looks as crisp and consistent as other solutions.


  • Option 2 is Pour type Gundam Marker. Unlike the fine point, the ink in these pens will is much thinner. It will runs a long the panel line result in very crisp and clean panel lines. Its only minor problem is you need to wait for it to dry (at least 10 mins to be safe) before cleaning up excess with rubbing alcohol and at least over an hour before top coating.

  • Option 3 is Tamiya Panel Line Accent. They work very similar to pour type but has different mixture. It comes pre-thinned so you don't need to do anything to do. The cap is double as a small brush that you will use to apply. I personally use this (and swear by it) and clean up excess with very little enamel thinner. It is the best of all IMO.


    Here comes the controversial part, people say that the Acent will eat through your plastic and make it brittle - which is not wrong but not always right. Yes, it will ruin the plastics if you shower them in the accent and enamel. All you need is a little touch and the ink runs. To clean up, damp a cotton swap with enamel thinner and rub right off. Very easy. Very little headache.


    ----


    There are other self-thin solutions that some people use, but I find the options above the be the most efficient ones.
u/Spicer66 · 2 pointsr/Gundam

Nope just lining markers. This is the set I used, I used the black the most since its mostly a red suit.

​

https://www.amazon.com/gp/product/B00HY93GHY/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

u/pluck-the-bunny · 2 pointsr/Gunpla

Great job first time out! I remember this kit fondly and can’t believe you found one. Everything u/levrin said is correct. If you are looking to continue, at the very least I recommend going out and purchasing an exacting knife/side cutters/ a set of paneling markers/and tweezers for decals.
Again. Great first outing and welcome to the hobby!
side cutters
paneling markers
tweezers
knife

Hope this helps

u/NoGameNoLyfe · 2 pointsr/Gunpla

Hahaha. No problem
(Hobby Link Japan Marker Black)
https://hlj.com/gundam-marker-black-fine-tip-for-panel-lines-gnzgm01
(Hobby Link Japan marker Grey)
https://hlj.com/gundam-marker-gray-fine-tip-for-panel-lines-gnzgm02
(Amazon set of 3) https://www.amazon.com/GSI-Creos-Gundam-Marker-Value/dp/B00HY93GHY/ref=mp_s_a_1_2?keywords=panel+line&qid=1569935250&sr=8-2
(Amazon Tamiya Panel Wash Black)
https://www.amazon.com/TAMIYA-87131-Panel-Accent-Plastic/dp/B01HDJ7BR0/ref=mp_s_a_1_4?keywords=panel+line&qid=1569935250&sr=8-4
(Amazon Tamiya Panel Wash Grey)
https://www.amazon.com/Panel-Line-Accent-Color-Light/dp/B07CMSBDCB/ref=mp_s_a_1_8?keywords=panel+line&qid=1569935250&sr=8-8
I put links from Hobby link Japan because thats what people here recommend using, bit I also put Amazon because it might be easier for you. Unfortunately I couldn't find the wash on Hobby link. Happy Building 😁

u/Hekaton1 · 2 pointsr/Warhammer40k

Gundam model kits are, well, model kits, of mechs from some anime’s. They look very unique, check out r/gunpla for more. These specific markers are simple to use: just run them into the lines and done! I got this set, which I would recommend: https://www.amazon.com/Gundam-Marker-Value-TAIYO-Corporation/dp/B00HY93GHY/ref=sr_1_2?ie=UTF8&qid=1535925628&sr=8-2&keywords=gundam+panel+line+marker&dpID=41KeV7gp0LL&preST=_SX300_QL70_&dpSrc=srch

Use gray for white, cream, etc. colors (I only used black here as a test); brown for red, yellow, green, etc.; and black for gray, brown, the rest.

Edit: they work well for tanks and terrain especially, where you don’t want to use a lot of wash but still want to have shadows. For them, I use a mix of this marker on the less deep shadows, and a bigger one on the deeper ones. Example: https://imgur.com/a/CycO1Wk the specific thick marker is the black one in this set: https://www.amazon.com/GSI-Creos-Gundam-Marker-Markers/dp/B0009AFN4Y/ref=sr_1_3?s=toys-and-games&ie=UTF8&qid=1535926026&sr=1-3&keywords=gundam+panel+line+marker+set&dpID=51ay1SKBe8L&preST=_SY300_QL70_&dpSrc=srch I’m sure you can find one of these individually too, I’m just too lazy to find it right now.

u/7x13 · 2 pointsr/Gunpla

Easiest and most beginner friendly would be the Gundam Lining Markers or Micron Pens

u/BeifongWingedBoar · 2 pointsr/Gunpla

I just watched 00 a few weeks ago and Virtue/Nadleeh is my favorite design from that series. Kit looks great, I've been tempted to get one myself but I have 3 MGs on the slow boat from Japan that will take me a bit to build. To take your kit to another level, look into panel lining. I bought this set and it's suuuuper easy and makes kits look incredible, especially on a kit that's mostly one color like this (the legs of Nadleeh especially).

On a side note, I don't remember Nadleeh having this shield/rifle combo in the anime, any idea if this was from the one mission where they sent it out as Nadleeh instead of Virtue?

u/uglyboyrufus · 1 pointr/Gunpla

If you plan on doing a lot of kits in the future, I'd just invest in some Gundam Markers. They're $10 for a set of black, gray and brown. Or if you just want black and gray, they're only $7.50.

u/fissionxmailed · 1 pointr/Gunpla

For beginners the HG RX 78-2 Revive is a great kit for starting. Few stickers, and nice part color separation. It's 1/144 scale, so just take your time to avoid breaking any parts.

$10 USD - amzn.com/B00WW4F8YA

You can also get some panel lining Gundam Markers to help highlight vents, details, parts of interests, etc. The RX 78-2 is a good kit to also practice panel lining.

$9 USD - amzn.com/B00HY93GHY

As for tools, something like this should get you by for now since you're just starting the hobby. Has everything you need to get building.

$17 USD - amzn.com/B01GHA6C7G



u/jedimika · 1 pointr/Gunpla

I agree that in terms of "cost per hour" gunpla isn't that bad at all. As for why I've dropped so much, I've got a friend who is deployed to Korea right now. He's only going to be out there 6 more months, so I asked him to send me a bunch of stuff- 11 kits totaling $270. So yeah, that hurt the wallet, but it means I'll be able to focus on buying supplies like paint and tools for a while!

I just got my panel markers actually. Ordered off Amazon and didn't notice that they were an item that was shipped from Japan. The set only cost $6 for gray, black and brown, but it took 6weeks.

Newtypehq has them at $3 each, but if you are in the states shipping is quick.

https://newtypehq.com/products/gundam-marker-liner-type?variant=14993675681841

If you're ok waiting, here's the link for the seller I bought from.

https://www.amazon.com/gp/aw/d/B00HY93GHY/ref=ya_aw_od_pi?ie=UTF8&psc=1

u/call_of_cthuloo · 1 pointr/Gunpla

The gear I used for this, plus the kit itself, I all got from Amazon.

A Basic Modelling Tools Kit and the Gundam Marker Value Set.

u/Kalzic · 1 pointr/Gunpla

Hey everyone!

I'm as new as it gets. So, I made a shopping list after doing some research on everything that I think I need to start. I'll place the links to all the items in the lines below. Everything is on Amazon because... well why not?

Gundam

Glue

Marker

Tweezers

Knife

Cutters

Mat

More Markers!

*Krylon Matte Finish

Am I missing anything?



u/ImportedGuy · 1 pointr/Gunpla

I used gundam panel lining markers. Brown for the reds and gray for everything else. I ran over all my lines with some alcohol on a qtip to makes them less heavy.

u/Recyclex · 1 pointr/Gunpla

I think something like this with the three basic colors is pretty good to start with, they'll probably last several kits until you want to start experimenting with paints.

u/Shenaniganz08 · 1 pointr/Gunpla
u/format120 · 1 pointr/Gunpla

Hey guys! Just found this sub, but I've been wanting to get into this hobby for a while. Planning on going with this one to get my feet wet.

Before I buy it, I'm also planning on getting these markers and these wash's (both from the wiki). Can someone show me to a video tutorial that explains exactly how to use them please? I've got no idea what the wash's are for...

I might also pick up this scriber to try and do some battle damage, but I can't find any tutorials on that? I'd also need some paint...

Is there anything else that I'm missing? I've already got decent angle cutters and an Xacto knife.

Thanks!

U. Just found the tutorials link that covers lining, but I could still use some info on adding battle damage!

u/iDingo91 · 1 pointr/Gunpla

I believe I have finally decided on my first Gunpla, the HG Age II Magnum and want to make sure the items I have added to my Amazon cart are ideal or not for a beginner/future use for HG and MG kits. The list is as follows:

  • Gundam Model Builder's Cutting Mat 12"x9"
  • Findfly 9Pcs Gundam Model Tool Kit
  • Gundam Marker Value Set
  • Mr. Super Clear Flat Spray
  • Bamboo Skewers
  • Alligator Clips
  • ScotchBlue Painter's Tape
  • Styrofoam Blocks

    I know that this sub has a list of tools and tutorials, but because I'm trying to budget, I was thinking no more than $100 would be ideal for me to start with. Since I'm beginning with HG models, I don't think I need a full set of Gundam markers, but if it's needed/required/highly suggested, I might pick them up as well.

    So I have read and seen that top coating and panel lining are essential for MG models to make them pop. Are they just as essential for HG model kits? Looking at pictures of the Age II Magnum I'm planning on getting from Amazon, it doesn't seem to have a lot of indents for panel lining. Of course, I could be wrong and be blind as a bat. If I don't do any sort of panel lining, is it still a good idea to add a top coat regardless?

    Also, how soon can one get into MG kits? I was originally going to jump straight into either the MG GM Sniper II or the RX-78-2 Ver 3.0 but after doing some research over the past few days, I've decided I'll be doing a few HG's to begin with as I haven't built model kits since I was like 7 or 8 with my dad. I'm thinking after the Age II Magnum, I was thinking about getting either the HG Double O Diver or the HG 00 Shia Qan[T]. Maybe after I complete the 3 HG's I've listed, is it possible to jump to the the GM Sniper II?

    TL;DR:

  • Are the items I have listed a good starting point?

  • Is a full set of Gundam Markers a necessity for HG/beginners?

  • Are panel lining and top coatings important for HG model kits?

  • Is it okay to use top coat on an HG model if no panel lining is used?

  • Edit Do people usually top coat the accessories? I can't seem to find any info on that.

  • What color panel lining pens do people normally use based on different parts of Gunpla's?

  • What level of skill should one be at before getting into MG model kits?

u/DrRobotica · 1 pointr/Gunpla

Gundam Marker Value Set -GM01&02&03- (Black, Gray, Brown) https://www.amazon.com/dp/B00HY93GHY/ref=cm_sw_r_cp_api_y0ZqxbBYCHNCM

Three pack of the two pens you have to $9 with Amazon Prime vs the ~$11 for just the grey and black. Saves a buck or two with an extra pen.

Using these for my first build, easy for panel lining. Just have some Q-tips ready for removing excess ink that you don't want, and some IPA for redos.

I bought the same mat and I have no issues with it!

EDIT: I also have the same cutters, works great for me. For the Xacto knife, just want to point out that that one does NOT come with a cap (I made the same issue). There is a version with a cap, then you can just add an extra blade set. Make sure you get the right blade size. That there is a #1.

EDIT2: I got the same sandpaper too lol. I wish I had gotten files since I didn't have something hard to attach the sandpaper too. But that's my preference. Well I don't mean I would want files specifically, but holding a flimsy piece of sand paper to sand hasn't been fun. I need to get some sort of small block to tape it too or something.

u/adrigreat14 · 1 pointr/Gunpla

Well, the only things you really need to build a kit are a pair of hobby clippers and motivation. Everything else is optional, depending on how much effort you wanna put into making your model look as best as possible(hell, I used nail clippers of all things with my first gunpla because I didn't want to invest in tools before actually building one for myself and knowing if this was a hobby I wanted to pursue or not).

For this one I actually got a modeling toolkit, some Gundam markers for panel lining and a small cutting mat through amazon(although you might be able to find them at local hobby stores as well). I can't really speak for other tools, but these ones worked pretty well for me. If you're worried about costs you can always start with just some basic tools and slowly build your toolbox up from there as you build more models. Hopefully you have as much fun with your first gunpla as I had with mine!

P.S. Remember I'm also a newbie so take all of this with a grain of salt

u/ckuenz587 · 0 pointsr/Gunpla

I bought black grey brown on a similar post for my wing zero custom. Black on dark like blue. Gray on whites. Brown on yellows.

https://www.amazon.com/dp/B00HY93GHY/ref=cm_sw_r_cp_apa_3N7PybMJYVF88