Reddit reviews Hakko CHP 7-SA Stainless Steel Non-Magnetic Precision Tweezers with Very-Fine Point Curved Tips, 4-1/2" Length

Disclaimer: In this video I'm lubing a linear switch but if you're lubing a tactile switch, you might want to skip lubing the legs of the stem and the leaf bumps, because this decreases the tactility of the switch.

This video shows what I do when I lubricate keyboard switches with grease and a paintbrush. This video can even help someone who doesn't know anything about lubing keyboard switches and just wants to see what it involves and how they could get started.

​

I will go slowly in the video, trying to be sure you can see what I'm doing.

​

My choices of where to apply lube are based on experience and on the results of an experiment I did and documented here:

https://imgur.com/gallery/hijSYcp

​

I wanted to show 2 different ways to open the switch, using a special opener tool or using regular tweezers. Both methods work fine.

​

The grease I typically use for this method is Tribosys 3204, which you can purchase from keyboard vendors such as switchmod.net, novelkeys.xyz, 1upkeyboards.com, etc. Other greases I like to use are Krytox 205g0 and Christo Lube MCG 129.

​

Tools:

Painbrush: https://www.amazon.com/gp/product/B00V4EG6D6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

​

Tweezers: https://www.amazon.com/gp/product/B00FZPFQHM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

​

4 Prong Pick-Up Tool: https://www.amazon.com/gp/product/B000RB3KZ4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

​

Switch Opener tool: https://kiiboss.studio/products/kiiopener_mx.html

​

In case you are opening Halo switches or BOX switches: https://kiiboss.studio/products/kiiopener_kailh.html

​

Acrylic switch holder / modding station: https://item.taobao.com/item.htm?id=525320012520

​

Or https://www.aliexpress.com/item/Keyboard-Axis-Board-for-Machanical-Keyboard-Black-Axis-Blue-Brown-Red-Gray-Green-White-Axis-Acrylic/32802439596.html?spm=a2g0s.9042311.0.0.37e34c4dgCIZli

​

A 3d printed option: https://www.thingiverse.com/thing:3294929

> Band aids tend to fall off quick in the shop,

Speaking of band-aids...
I found these fabric ones to stay stuck really well. Strong enough to rip your skin off if you get impatient removing it.

For tweezers, I like these ones used for placing surface mount components.

This tool kit may be more than you want to spend, but mine is an amalgam of random stuff that just lasts. I built this kit over 3 years ago and the only thing I've replaced is the Hakko bent tweezers because I used to abuse them. It is my opinion that good tools pay for themselves if you do something regularly with them.

Phillips Driver: Moody 000

Pentalobe: Wiha PL1

Opening tool that I've sharpened into a square blade on one end and a standoff screw remover on the other: Metal spudger

Used to be more relevant when I did more gen 2/3/4 iPads for quick bezel cleaning: 3/32 stubby flathead

Curved tweezers (so many uses): Hakko

Spudgers that last (unless you really abuse them): Menda

Best Y000 for iPhones I've found so far (this one I'm not married to): Bunkaikoubou

The flat file in this set: File

One of those cheap driver sets for bigger stuff like torx, etc. I don't work on stuff that really beats those bigger bits up, so I buy a cheap set for that.

Any dental pick for getting shit out of charge ports, etc.

Edit: I'm sure you can shop around and find cheaper prices, and I also do not claim these are the absolute best tools, just that my set of this stuff has lasted over 3 years and I repair mobile devices full time.

I love it, but someone get this man some 7SA Tweezers. lol.

Also, I recommend a silicone baking sheet to work on. Prevents table damage way more than thermal tape. =)