Reddit reviews Hamilton Beach True Air Carbon Filter for Tobacco Odors
We found 3 Reddit comments about Hamilton Beach True Air Carbon Filter for Tobacco Odors . Here are the top ones, ranked by their Reddit score.
Officially Licensed
To significantly cut the smell, unless you are smoking a joint or blunt
To keep the area Fresh
and make sure to use these filters for the air purifier
The purifier takes 3 filters which is what is included in that filter pack i sent. The smoke ones are really good and have a carbon filter backing to them and last about 3 months. The ones that come with it are great for alergens but you might as well toss them if you are trying to get rid of smoke only.
Edit: There is also this Which goes with this. Now this might be overkill, but it will get rid of any smell you have period, cats, smoke, whatever.
I just finished my first pc grow, 19 grams after a week dry when it went into the jar, so with some LST you can easily make that 3.5 grams a month mark.
Yeah my case had a window too, I scuffed it a bit and painted the inside with black spray paint, and used that same reflective material. I painted the reflective material black as well before gluing it on. Paint didn't do that great on either piece but it turned out acceptable once they were glued together.
Fans, I used these and I mounted a power strip on the inside of the case, it runs those 2 fans 24/7 and a timer for my lights, which are CFLs plugged into a 2nd strip. They are really noisy, though no splicing needed and they move a lot of air. I'm in a humid environment and didn't want mold. I did use a less powerful PC fan spliced into a cell charger hung inside the case to blow on the plant when it was small to help strengthen the stem.
If that case is steel and not aluminum, you may look at using mylar instead of the windshield bubble wrap and mount stuff using magnets. I used the windshield stuff it's too thick, so I split it using a razor blade so it'd be thin enough that I could put magnets on the back of my power strips and stick them to the back panel. If it's aluminum you'll have to mount with zip ties of screws or something.
You're gonna want a light trap. I used this style I got some PVC/vinyl "outside corner molding" or "corner guard" from the local hardware store for mine and left it white instead of black. This was just on the front intake, the rear exhaust had a carbon filter taped over it.
For exhaust filter I used these the smoker ones have actual chunks of carbon in them, there's also lots of cheaper diy versions out there, but I found taping one of these over the exhaust to be easier. I used some regular black AC foam over the front behind the front face plate but in front of the intake fan.
Can't help with that light, may order one myself, just make sure when looking at LEDs that it's not too wide for the case. Also see where the plug comes into the back, you may loose a good bit of vertical room due to cord and mounting. I used CFLs that were plugged into a normal power strip that was stuck to the back wall with magnets and it worked well. I could raise and lower the lights easily, but could only get 3 23watt (100 equiv) bulbs in that one strip.
You'll also want a roll of reflective foil/hvac/duct tape to seal all the corners and whatnot.
That soil has a PH of 6.6 so it'll probably be great.