Reddit Reddit reviews HitLights 16.4FT RGB LED Strip Lights 5050 Color Changing LED Light Strips Kit with Remote Control, Power Supply for Home Room Kirchen Decoration

We found 6 Reddit comments about HitLights 16.4FT RGB LED Strip Lights 5050 Color Changing LED Light Strips Kit with Remote Control, Power Supply for Home Room Kirchen Decoration. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Lighting & Ceiling Fans
Novelty Lighting
LED Strip Lights
HitLights 16.4FT RGB LED Strip Lights 5050 Color Changing LED Light Strips Kit with Remote Control, Power Supply for Home Room Kirchen Decoration
Everything you need including a 16. 4 feet/ 5M of 300 LED SMD 3528 strip lights, a small 12V DC PWM dial Dimmer, and an easy plugin 12 volt transformerCut table and connectable - compatible with our hit Lights 8mm Connector extensions and accessories. Simple connect - Cut with a pair of scissors every two inchesDimmable and flexible these LED strips are great for a variety of indoor/ interior uses including under cabinet lighting in kitchens ambient Accent lighting in bedrooms lighting toe kick's in bathrooms or adding light to displays or shelves. Great for China cabinets or a home bar!Say goodbye to complicated installations - our kits install quickly and easily right out of the box, no soldering, electrical experience, or tools required - and they last for years with minimal power requirementsHit Lights quality. Backed by a one year from hit Lights for peace of mind. Contact our us-based customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing or installation
Check price on Amazon

6 Reddit comments about HitLights 16.4FT RGB LED Strip Lights 5050 Color Changing LED Light Strips Kit with Remote Control, Power Supply for Home Room Kirchen Decoration:

u/animusli · 33 pointsr/crafts

I bought all my material at Aaron Brother's, a bit pricey but they had a buy 1 get 1 free on pretty much every piece I needed for the project. The case it's in is called a keepsake box. I used watercolor paper by Canson, but any cardstock type paper would do (think thickness of greeting cards, maybe a bit thicker). Each layer is spaced apart by two piece of doublesided thick sticky tape to give it more depth. And for the lighting I cut a small hole in the back of the box and used http://www.amazon.com/gp/product/B00713R2ZK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 (straightforward to use, cost a few more bucks but I think the convenience is worth it. And as for the whole design, I just had a few ideas in mind and did it free hand. But the key thing to think about it how much of one layer will cover the other, and to make sure you have enough space to put everything you want into the picture. Make sure to keep checking your progress in between every layer. Hope that helps! Ask if you have any specific questions I forgot to mention.

u/DJWafflesnatcha · 5 pointsr/Dakimakuras

Edit>> Added additional pictures to show the frame construction. But the original post stil only shows 4. Go to the actual album to see them.

I made a dakimakura stand from .5 inch PVC piping and connectors from Home Depot.

Here are the dimensions of the pieces:

2x 10 ft. 1/2 in PVC pipe ($2.50 each) cut into:

2x 59 in.

1x 19 in.

7x 7 in.

2x 8.25 in.


4x 90 degree elbows - $1



4x "T" Connectors - $1

4x Caps - $1.75

PVC Glue - $5

PVC Pipe Ratchet Cutters - $14

After completing the stand, I wanted to try to hook up some LED lighting and seeing how that would look. Found a strip with the right length on Amazon for $19. Looks pretty good, imo.
I picked the "warm light" LEDs so it's not too white.

Total: $8.50 for the stand, $19 for the supplies to build it, and $19 if you want lights.

u/Attycakes · 3 pointsr/crafts

Not a dumb question at all! Unfortunately it doesn't, it's just a box with a lot of space in it to make the layers. The lights that have been recommended that I purchased for mine are these though! click here

u/Tankimus · 2 pointsr/DIY

If you got a kit like this, You could lose the adaptor and connect it straight up to your 12v. If you want to be extra safe, add in a 12v 5a regulator. They're quite cheap.

http://www.amazon.com/gp/aw/d/B00713R2ZK/ref=mp_s_a_1_5?qid=1462845650&sr=8-5&pi=AC_SX236_SY340_QL65&keywords=led+strip+dimmable&dpPl=1&dpID=51IdjxLJ3IL&ref=plSrch

u/mrmnder · 1 pointr/SomebodyMakeThis

Here you go, just plug them in, no battery to worry about

https://www.amazon.com/HitLights-White-Dimmable-Strip-Lights/dp/B00713R2ZK/

u/Sybre · 1 pointr/DIY

Here's exactly what you need https://www.amazon.com/LED-Light-Strip-Kit-Bathrooms/dp/B00713R2ZK

If you know how soldering works, you can obviously buy a strip and solder an ac adapter and a switch so it's exactly how you want it, but this is the easiest way to do it otherwise.