Reddit reviews Interpower 8301213 IEC 60320 C14 Screw Mount Power Inlet with Quick Disconnects, IEC 60320 C14 Socket Type, Black, 10A/15A Rating, 250VAC Rating
We found 6 Reddit comments about Interpower 8301213 IEC 60320 C14 Screw Mount Power Inlet with Quick Disconnects, IEC 60320 C14 Socket Type, Black, 10A/15A Rating, 250VAC Rating. Here are the top ones, ranked by their Reddit score.
10/15 amp, 250V C14 power inlet for connecting a C13 IEC cordPolyamide for resistance to wear and abrasionNickel-plated brass terminal for resistance to corrosionQuick disconnect terminals for mobile equipmentMeets EC, UL, ULC, CE, CCC, and VDE standards
Each wall, bottom and top was separately printed then glued with an epoxy. This was made with 6 separate prints using PLA plastics. Total print time was about 6 1/2 hours.
I used parts that I had from my last enail project over a year ago. I know there are superior components such as connectors (XLR), and PID controllers. However I haven't had any issues with these in over a year with thousands of hours on these components.
I went ahead and shared the model files here if you wish to start printing your own. Included are the STL models for slicing and Sketchup models if you want to modify your own.
List of parts used with this particular 3d model.
I suppose I will model different versions for different pid face plates and outlets as time goes on. Hopefully others will modify and share their version.
Feedback suggestions are always welcome.
Special thanks to /u/j4yt3x for his DIY write up.
Non-mobile:
^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble.
I was thinking something like this to get the power in the backside.
I think that the unit will be plenty long to mount in the collar. It's like 3-4" long, similar to the 4" shanks I'm using.
Dont open a power supply if you dont know exactly what you are doing!!! The capacitors can carry a heavy charge for quiet a while and can kill or seriously hurt you. With that said, how myself I have seen many others do is to use a C-14 adapter mounted to the back of the cab, then on the inside of the cab, cut off the plug end of a power strip and connect the leads to the C-14 either with solder or quick disconnects. That way you have a modular power plug for your cab plus everything plugs into the power strip.
Here you go. I built an STC-1000 a few weeks ago and used this for power input to the box.
Interpower 8301213 IEC 60320 C14 Screw Mount Power Inlet with Quick... http://www.amazon.com/dp/B00917Z96S/ref=cm_sw_r_udp_awd_qjeUtb09RS9DQ
I also used a mono stereo input on the box for the temp probe and soldered a mono headphone plug onto the end of the temp probe lead. Works great!
Edit: here's a link to my STC-1000 build:
http://imgur.com/a/Mrtrq
Here's a list of all the parts.
Project box:
http://www.amazon.com/gp/aw/d/B0002BSRIO
Power Socket Plugs:
http://www.amazon.com/gp/aw/d/B008J80J1A
Power Inlet:
http://www.amazon.com/gp/aw/d/B00917Z96S
Temp Controller:
http://www.amazon.com/gp/aw/d/B00OXPE8U6
I already had some wire and the crimp on connectors.