Reddit Reddit reviews Isolate It!: Sorbothane Acoustic & Vibration Damping Film 50 Duro (0.10 x 6 x 12in)

We found 6 Reddit comments about Isolate It!: Sorbothane Acoustic & Vibration Damping Film 50 Duro (0.10 x 6 x 12in). Here are the top ones, ranked by their Reddit score.

Industrial & Scientific
Hardware Washers
Fasteners
Isolate It!: Sorbothane Acoustic & Vibration Damping Film 50 Duro (0.10 x 6 x 12in)
High Performance Ultra-Soft PolyurethaneException Acoustic Energy InsulationUltra Thin Film Fits Many Different Applications0.10" of Sorbothane Will Absorb up to 10 dBThickness Tolerance: +/- 0.015" Durometer: 50 Shore OO
Check price on Amazon

6 Reddit comments about Isolate It!: Sorbothane Acoustic & Vibration Damping Film 50 Duro (0.10 x 6 x 12in):

u/chief_shankaho · 4 pointsr/MechanicalKeyboards

Any kind of foam cut cut around the mounts/usb in the bottom of the case would help with that. I've heard sorbothane is really good but it's a bit pricey. Another popular solution that isn't foam is the shelf liner stuff usually used for kitchens.

u/hhkb4lyfe · 3 pointsr/MechanicalKeyboards

It goes inside/in the bottom of the case. It's sandwiched in between the case and pcb. Link here- https://www.amazon.com/gp/product/B0084EXBFA/

I've been meaning to shoot a typing video so people can hear the difference. I have it installed in the exact same case you used for your build and it sounds 100X better.

u/Gus_CA · 3 pointsr/MechanicalKeyboards

I used this one https://www.amazon.com/gp/product/B0084EXBFA/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 I pasted all of it to the case, then used an exacto knife to make it fit well.

u/cijanzen · 2 pointsr/MechanicalKeyboards

Huey from Top Clack has used this and did a typing video. It cut down the sound quite dramatically.

u/clothing_throwaway · 1 pointr/MechanicalKeyboards

Questions about liner material and lube...

For liner material, what acoustic differences am I going to find between: neoprene, sorborthane, and rather generic looking "foam" rolls? They're all pretty much the same thickness, about 2-3 mm.

For lube, I'm looking at: Permatex dielectric grease, krytox 205 grade 2, trybosis 3204 and trybosis 3203. What would be good for stabs, what would be good for linears, and what would be good for tactiles? And if possible, is there anything that's a good "all-arounder"? Aka, something that could easily work for both stabs and switches.