Reddit reviews Iwata-Medea Airbrush Cleaner (16 Oz.)
We found 8 Reddit comments about Iwata-Medea Airbrush Cleaner (16 Oz.). Here are the top ones, ranked by their Reddit score.
A high-strength, general-purpose cleaner, great for cleaning any airbrush or any artist tools where acrylics, watercolors, gouache, inks or dyes are usedWorks well on all models of airbrushes, synthetic and natural-haired paint brushes, and is excellent for use in the ultrasonic cleaning of technical pensEnvironmentally safe and ready to useApply in the needle cap and along the needle to enhance paint flow and prevent tip drying
I think it's cool you want to pick up a hobby your father had. It will be a nice reminder every time you pick up the gun.
I use this 100% for miniatures, and it works great!!
​
Alright, here is the list I bought. It's a bit more than you want to spend, but this will ensure you can get going right away, and not be frustrated. I did a fair amount of research on different forums, sites, and youtube videos. If you want to know why I chose something, feel free to ask. I was going to bold the ones that you absolutely need, but I would say everything in the first set are a must.
​
​
​
​
For the compressor, I keep mine at about 18-20 while doing miniatures and it's perfect.
I do 1 drop Improver, 5 drops thinner, and 6 drops primer and have perfect flow.
​
Feel free to ask any questions! Good luck!
Hvstle
You don't need airbrush cleaner, but it's cheap, lasts forever, and you'll want to have it around. You won't just use it to clean your airbrush, but anything you spill paint on, including yourself. It cuts through paint like nobodies business. So it's well worth keeping around.
I use GW paints and water them down with Airbrush Medium rather than water. Again, it's cheap and lasts freaking forever.
Use this stuff after each color change and when finished for the day. http://www.amazon.com/Iwata-Medea-Airbrush-Cleaner-16-Oz/dp/B003TJA0S6/ref=sr_1_1?s=arts-crafts&ie=UTF8&qid=1453525091&sr=1-1&keywords=airbrush+cleaner
I dump the excess paint out then rinse with water quick before spraying some water through to get some more paint out. I dump the dirty water and spray some of this until no more color comes out. It works very well for me. 20-30 color changes so far with no problems at all. Good luck with your future painting!
This, and getting out of the hobby and won't need them, nor the cleaning kit and pot, the gloss top coat, or the air brush cleaner.
Long post incoming....
So, I don't think I've seen many airbrush discounts. Badger did a nice promotion where you could buy any airbrush for $55 for their 55 year anniversary this summer, but other than that it's kind of hard to find discounts. As far as Prime Day, I doubt they're going to have discounts on airbrushes, that's a pretty niche product they don't really get into. If you want to get started with that, I'd do something like this:
You then need a cleaning pot, some cleaning fluid, and an airbrush hose All told, that's like $300.
Then you need paint, paint brushes, a hobby knife, super glue, a mini hand drill, some small drill bits, sprue cutters, basing materials (cork board, model railroad ballast, etc) and I find a pair of tweezers helpful. That could add up to another $200 in materials (and obviously can cost way more, paint is expensive). So of your $550 budget, you would then have $50 remaining for models... which will buy you one model kit. So if you're looking to get started for $550, I'd probably forget the airbrush for now, and just get paints that can be used with one later. I recommend Vallejo paints. The eyedropper bottles work great for airbrushing, and you can just thin them with water. I haven't met one yet that doesn't work. A paint set like this would set you up nicely for doing an Imperial Guard army.
As far as what army to play... Guard is fun, but if you like the modern military aesthetic, Space Marines might be more what you're after. The new Repulsor Executioner tanks look awesome, and the new Primaris marines are great looking models... some of the best GW has produced. The Guard kits are looking kinda... dated IMO.
I just went through this myself and am very happy with my purchases. This is a complete entry level set with the tools you will need to maintain it. Assuming you're US based, you could have everything Monday with Prime shipping.
This will allow you to setup a bare-bones station. You could also get a fume hood or just spray into a box in a well ventilated room. Get a good white led light (if you don't have on already) to illuminate your workspace and you're good to go.
So, you could start with this (this is what I started with, and while it tends to clog, it does the job):https://www.amazon.com/Master-Airbrush-Multi-purpose-Dual-action-Compressor/dp/B001TO578Q/ref=sr_1_4?ie=UTF8&qid=1520958546&sr=8-4&keywords=masters+airbrush
But if you want to dive in head first...I recommend the below:
https://www.amazon.com/AIRBRUSH-COMPRESSOR-Airbrush-Published-Exclusively/dp/B001738DXU/ref=sr_1_12?ie=UTF8&qid=1520958546&sr=8-12&keywords=masters+airbrush
& https://www.amazon.com/Iwata-Eclipse-Hp-Cs-W-Airhose/dp/B00695CY54/ref=sr_1_2?ie=UTF8&qid=1520958642&sr=8-2&keywords=iwata+hpcs
As for accessories - get yourself some m3 masks, gloves, medea airbrush cleaner https://www.amazon.com/Iwata-Medea-Airbrush-Cleaner-16-Oz/dp/B003TJA0S6/ref=pd_sim_21_1?_encoding=UTF8&pd_rd_i=B003TJA0S6&pd_rd_r=ZNFGCQKPJZHMJ0HX1Y51&pd_rd_w=sFOW8&pd_rd_wg=8bTp7&psc=1&refRID=ZNFGCQKPJZHMJ0HX1Y51, and one of these https://www.amazon.com/Airbrush-Cleaning-Needle-Nozzle-Holder/dp/B0154HN2NA/ref=pd_sim_21_3?_encoding=UTF8&pd_rd_i=B0154HN2NA&pd_rd_r=ZNFGCQKPJZHMJ0HX1Y51&pd_rd_w=sFOW8&pd_rd_wg=8bTp7&psc=1&refRID=ZNFGCQKPJZHMJ0HX1Y51
Hey! I was in a similar situation a few months ago with around a $200 budget as well. Here's what I got:
Airbrush: Iwata Revolution - It's a great airbrush and is almost always on sale on Amazon for under $100. It's easy to use, easy to clean, and is solvent safe, meaning you can spray more than just acrylics.
Compressor: Master Airbrush - I wanted something with a tank on it because I didn't want it to run the entire time, and this one fit the bill. It's super quiet (I can even run it at night), and it comes with a moisture trap, which is super important. It also comes with a hose!
That brings everything to about $200, so there's not much wiggle room to fit other stuff in if you draw a hard line on your budget, but definitely consider:
Spray Booth: Master Airbrush- This thing is amazing. I love it. It's compact and super easy to use. It folds up super tidy and even has a button to retract the cord.
Cleaner: Iwata-Medea Airbrush Cleaner - comes in different sizes, but it's been wonderful when cleaning out my brush between paints or when I need to do my monthly field-strip.
Thinner, Retarder, and Flow Improver: Vallejo products!- I love the Vallejo Auxillaries. They're easy to use, pretty cheap, and widely available depending where you live.