Reddit reviews Iwata-Medea Quick Disconnect Set

Just a forwarning they are a bit louder than the air compressors that are specifically built for airbrushes but I just keep mine in a different room with a long hose. You will also need a coupler along with the hose. Here's the links to AZ where I got my hose/coupler: https://www.amazon.com/gp/product/B000BQO8W4 and https://www.amazon.com/gp/product/B001P5S5CO

Yup, it's called a quick disconnect https://www.amazon.com/Iwata-Medea-I-160-3-Disconnect/dp/B001P5S5CO/ref=sr_1_27?ie=UTF8&qid=1481391638&sr=8-27&keywords=airbrush+quick+disconnect+iwata

Thank you for the help, I'd also like a QD mount. Here are things ive found. Which one/combination of these things should I get?

https://www.amazon.com/Badger-Air-Brush-Co-51-042-Coupler/dp/B003EGZB2Y/ref=sr_1_4?ie=UTF8&qid=1549178476&sr=8-4&keywords=badger+quick+disconnect


https://www.amazon.com/Master-Airbrush-Fitting-Conversion-Adapter-x/dp/B0038NJYHG#customerReviews


https://www.amazon.com/Iwata-Medea-I-160-3-Disconnect/dp/B001P5S5CO/ref=sr_1_13?ie=UTF8&qid=1549178637&sr=8-13&keywords=airbrush+quick+disconnect


https://www.amazon.com/Master-Airbrush-Release-Disconnect-Connections/dp/B001MKGOUM/ref=sr_1_5?ie=UTF8&qid=1549178655&sr=8-5&keywords=badger+quick+disconnect

You're going to find that you can either get some decent gear upfront for a realistic price, or you can go cheap and have to replace poorly performing gear almost immediately, which is the expensive way to go. These items below come in within your listed budget and will give you good service for years.

Get a compressor with a tank. Those cheap air compressors may save you thirty dollars upfront, but you're really going to regret having that on-demand-only air pressure bobbing up and down and screwing up your air flow. This Master TC-20T is a good buy. Get the TC-40T for twenty dollars more if you're going to want to do other types of spray paint art in the future. This one has more endurance before heating up. I own one of these and they are quality gear at a good price.

Get a decent starter air brush. This Iwata Neo Dual Action is good for a starter and yet isn't too expensive so if you screw it up you won't break the bank. At the same time, the machining of the parts is much, much better than those cheap Master sets which really aren't good at all. Granted, you may get lucky and get a good-yet-cheap Master air brush, but more likely than not, you'll spend most of your time trying to get the thing to give you a spray without splatter.

Get a quick release coupling set for the airbrush. Having to use a wrench to attach the air brush gets old really, really fast -- like immediately -- and the ten or so bucks makes it a great deal. Iwata-Medea Quick Disconnect Set

I have an Iwata Revolution CR, that same compressor just a different name, and a quick connect from TCP Global from one of their airbrushes (which I would not recommend by the way).

Not sure if it's available on amazon UK but here is a quick disconnect it has a 1/8 inch connector which is the same as that compressor.

Though I'm not sure by what they mean with an adapter plug. Power plug maybe since UK is on 240V?

Edit: Words

If you already have the hose that comes with those China airbrushes (1/8 size). You will need this adapter to be able to fit your badger appropriately to the hose you already have.

A more convenient and practical solution though is to get a Iwata QD set

and then just get a Badger QD adapter. The reason being that 1/8th fittings are more commonly used by more airbrushes (Iwata, Chinese made, GREX, Harder&SteenBeck, Mr.Hobby, Tamiya) than Badger's fittings. Sticking with 1/8th gives you more options and it is better that your Badger adapt to the 1/8th fittings rather than the other way around where you have your China and other airbrushes adapt to Badger's fittings.

Also, for these QD and coupler attachments. I advice you buy the real branded ones from Iwata and Badger. Do not settle for those unknown China branded ones as they leak air horribly.

For airbrushes, I'm personally a fan of the Neo by Iwata, especially their gravity feed (cup) model. The brush is well built, fairly easy to take apart and clean, and has very few issues with most paints and other products you may put through it.

I picked mine up on sale for around $50, and if you have a Michael's or Hobby Lobby nearby, you may be able to pick it for less with one of their one-item coupons they release occasionally. It's also nice if you have a hobby store near by as you can drop in a pick up replacement needles or nibs if you accidentally drop it >.>; . Needles and nibs typically cost in the 10-15 dollar range for replacements, so not too terrible.

For compressors, a simple compressor with a tank will work wonderfully, so long as it has a proper pressure regulator and water trap. I have this compressor and it works well, after I got the correct airbrush hose to attach to the NEO.

There are a couple extra tools that can help with airbrushing as well, but most can be picked up at a later point. Something I would recommend that you get with the initial purchase is a spray booth. This allows you a place to spray into and capture many of the errant particles of paint from your airbrush. Combined with a proper respirator mask, it will ensure that you don't breath in any of the particulate from airbrushing, and hopefully don't have airbrush paints drying on items they weren't directly sprayed on. I would say of the two, the mask is the most important to have.

A quick-disconnect is useful for cleaning and swapping airbrushes, but isn't really necessary at first. A cleaning pot is also useful as it gives you a dedicated space to spray out leftover paint and cleaing fluid, and should stay fairly contained.

I would also look at purchasing a ultrasonic cleaner further on, as it is amazingly helpful for cleaning the airbrush when paint has leaked into the body, or spilled into places it shouldn't be.

Other's can probably offer advice as well, but that's what I currently use. Hope this helps!