Reddit Reddit reviews Iwata-Medea Revolution CR Dual Action/Large Gravity Feed Cup

We found 12 Reddit comments about Iwata-Medea Revolution CR Dual Action/Large Gravity Feed Cup. Here are the top ones, ranked by their Reddit score.

Artists Painting Supplies
Airbrush Painting Supplies
Arts, Crafts & Sewing
Painting, Drawing & Art Supplies
Airbrush Sets
Iwata-Medea Revolution CR Dual Action/Large Gravity Feed Cup
An internal mix, dual action top-feed airbrush with ergonomic handle design with a 1/3 oz (.9 ml) Gravity-Feed wellLarger nozzle and needle combination (0.5-mm) that makes for easier spraying of thicker or heavier paintsRedesigned trigger mechanism and larger needle-chucking nut for easy assemblyReplaceable internal solvent-proof PTFE needle packing for use with solvent or water based paints
Check price on Amazon

12 Reddit comments about Iwata-Medea Revolution CR Dual Action/Large Gravity Feed Cup:

u/GodEmperorPePethe2nd · 10 pointsr/Grimdank

https://www.amazon.com/gp/product/B000BQS3UW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

$90, just make sure to order a hose too (only airbrush i bought that didnt come with one). You can use a cheapy air compressor till you save for a good one.

Damn good airbrush. With Flo Improver i can run ANY paint through it, GW, P3, Vallejo, doesnt matter

u/hollow_bagatelle · 2 pointsr/Gunpla

Airbrush

Compressor

X-acto -Z series blades are great.

For sandpaper you can just buy some popsicle sticks and 400, 600, 1000 grain, and then a buffing pad from a nearby hobby store or something like walmart even, it's all the same honestly. The popsicle sticks you can wrap the paper over to give you something to rub it against easily. Just practice on some of the parts that come with a kit that don't get used so you aren't eating away too much plastic.

u/sujinjian · 1 pointr/Gunpla

Thanks for the info!

So now I'm look at the Iwata Revolution and TC-40T. Do you have any other recommendations for tanked compressors? How do you refill the airtank?

https://www.amazon.com/gp/product/B000BQS3UW/ref=ox_sc_act_title_1?smid=ACD4013XBS5C9&psc=1

https://www.amazon.com/gp/product/B00WBT7PTW/ref=ox_sc_act_title_2?smid=A23ADOZFIJNPFB&psc=1

u/saikron · 1 pointr/Gunpla

http://www.amazon.com/gp/product/B000BQS3UW?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00

I just bought this, and it's great for me. It has a .5mm tip which would probably be considered large - they're usually .3mm. That big honkin' tip means I can blow any paint through it with little or no thinning.

I also bought the Master starter kit for like $70 that comes with a working compressor and crappy airbrush. Honestly, if it could blow the glittery createx crap that I use it would have been perfectly OK for gunpla. My plan is to use this compressor until it burns up (reviews say it will). http://www.amazon.com/gp/product/B001TO578Q?psc=1&redirect=true&ref_=oh_aui_search_detailpage

u/BishopMiles · 1 pointr/Gunpla

Save your money you are like $100 bucks off getting a decent set up.

Edit: Let me elaborate on my reasons a little bit.

You want an air compressor with a tank and an automatic on/off switch.

This will keep your airbrush from getting pulsating air and the on/off switch will extend the life of your compressor (so will the tank as it isn't running all the time). Some added bonuses is being able to work without a lot of noise.

There are some cheap ones you can buy on amazon. ( TheTC-40T and the Master Tank Compressor)

Airbrushes are tricky. but you still can get soem good ones under $100. Like the Badger Krome RK-1, Badger 105 Patriot, Iwata Neo (Not made by Iwata but supported by them), and Iwata Revolution

u/ChainsawSnuggling · 1 pointr/Warhammer

I have that Master Airbrush kit. You get what you pay for. It worked alright for a couple uses then crapped out on me. The compressor is still kicking though and I currently use it to power my Iwata Revolution, which has taken a couple months of heavy use like a champion so far.

u/rancor1223 · 1 pointr/modelmakers

What about the Iwata Revolution. Seems to be halfway there is terms of price, but unlike NEO is actually manufactured in Japan (supposedly higher quality). That's what I as a beginner bought and I love it.

u/I-Like-Turrdles · 1 pointr/minipainting

This is my setup, I'm happy with it.

https://www.amazon.com/Iwata-Medea-Revolution-Action-Large-Gravity/dp/B000BQS3UWhttps://www.amazon.com/Paasche-D500SR-Compressor-Regulator-Moisture/dp/B000BR2HOO

Additionally, a decent airbrush that is a little cheaper.https://www.amazon.com/NEO-Gravity-Feed-Action-Airbrush/dp/B004INERK4Something to keep in mind, is that the NEO is NOT made by Iwata. It's a Chinese airbrush with their name on it. But I've heard it's quite decent. Here's a video on it, and it's got a great video for learning to clean your airbrush in the description. https://www.youtube.com/watch?v=q8YKUA2SGzU

u/dylan227 · 1 pointr/Gunpla

I bought one very similar to yours (the $50 version I believe). It broke on the second day of use :/

I think you would be much better off getting this one or this one. I have the Iwata Eclipse now, and it's good.

u/_Whammo_ · 1 pointr/modelmakers

Cool! Solid budget, I think.

I recommend the Iwata Revolution airbrush with a Master Airbrush compressor and spray booth. I have these 3 items and I absolutely love them so far.

u/Setsuna00exia · 1 pointr/Gunpla

So, I saved up some money and have a break from school finally coming up. I see that alot of the badgers are decently priced (i think im going to stay away from the iwata as they are generally over 100). But is there a certain badger that you recommend? the one you originally linked seems like a good one, but is there any details with these other ones that you may have dealt with?

1)

2)

3)

[4)](http://www.amazon.com/Badger-Air-Brush-200-10-Gravity-Airbrush/dp/B003970D3U/ref=sr_1_31?ie=UTF8&qid=1456908816&sr=8-31&keywords=gravity+feed+airbrush
)

5)

Im sorry for sending a bunch of links, but i'd thought id ask and see what you may say :D

u/obebudda · 1 pointr/Gunpla

Looking for opinion on an airbrush to buy narrowed it down to these three.

Iwata HP-CS

Iwata Revolution CR

Paasche TG-3F