Reddit reviews JAXPETY 36V 500W Electric Bicycle Cycle 26" E Bike Front Wheel Ebike Hub Motor Conversion Kit Hub Motor Wheel
We found 7 Reddit comments about JAXPETY 36V 500W Electric Bicycle Cycle 26" E Bike Front Wheel Ebike Hub Motor Conversion Kit Hub Motor Wheel. Here are the top ones, ranked by their Reddit score.
🚴‍♀️36V 500W super power brushless gearless hub motor, Restricted to 750W and 19.88mile/h by default as a road-legal kit🚴‍♀️Crank speed sensor for pedal assist, Brake Levers cut off the power supply to the motor safely🚴‍♀️Nylon tire& alloy rim& stainless steel spoke, Rare-earth metal magnates are used in the motor to efficiently produce large power🚴‍♀️Aluminum alloy powerful controller guarantee big current supply🚴‍♀️Twist throttle has battery level display and power-cut off button
This one
https://www.amazon.com/gp/product/B0761QYCKM/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0761QYCKM/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
My experience also. https://www.amazon.com/gp/product/B0761QYCKM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Paid $135 about a year ago. This battery was about $170. https://www.amazon.com/gp/product/B07C1N3J1W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Ebay was cheaper.
I didn't use a guide, mostly just built it to how I liked it. Here are my parts though, don't hesitate to ask any questions!
Front hub motor with wheel and tire. Includes throttle, controller with bag, PAS (pedal assist), and 2 ebrakes that can be hooked up to caliper brakes.
Headlight with switch, also has a horn.
Taillight that I connected to the headlight switch wiring.
I can't link the exact battery, because it was a one-off item. For the motor I listed above, you'll need a 36v battery with 13Ah+.
I also used dielectric grease to help water/rust proof the connectors, silicone sealant for the case of every part. To hide the wiring, I drilled holes in the frame and routed wires through.
Can you send me link for geared hub?
Is it like this?
JAXPETY 36V 500W Electric Bicycle Cycle 26" E Bike Front Wheel Ebike Hub Motor Conversion Kit Hub Motor Wheel https://www.amazon.com/dp/B0761QYCKM/ref=cm_sw_r_cp_api_i_FC35CbJT3X5K0
Even DIY on the cheap, $200 is too low. The cheapest build is going to look something like this:
That's $237 total, and that doesn't include any "oops" money. You will screw something up. Count on it.
Save up $400 and you've got yourself a reasonable starting budget for a first build, but you'll still have to get by on a hacked together tool-battery solution or cheap lipos. Batteries are easily the most expensive part of any build, and there is no cheap way around it if you want lithium. And you do want lithium.
A good strategy is to build a decent "base" e-bike with a frame and motor that you can work with, then add a better battery later. Unit Pack Power has decent packs at good prices.
https://unitpackpower.aliexpress.com/store/group/Down-tube-battery/1178407_514085584.html?spm=2114.12010615.pcShopHead_5960954.1_6_0
I got the kick bike used from Craigslist. I used a kit off EBay to do one of them. The other I did with Alibaba kit which was a little cheaper but was essentially the exact same.
I used this kit for a Schwinn kick bike with a true 26” front wheel. Worked great. I mounted the battery over the rear wheel using a rack and some engineering ingenuity. Didn’t install the pedals assist (there are no pedals....) and used the thumb throttle only. If you are installing a kick bike brand scooted, you may need to get a 700 size tire or 29” tire, depending on the kick bike model. You must match the tire size or risk a ground clearance issue with the board.
https://www.amazon.com/dp/B0761QYCKM?ref=ppx_pop_mob_ap_share
I’ll look for a picture of my build. Please be warned it’s wrapped in cheetah fabric and playa dust from burning man.....