Reddit Reddit reviews Joe Knows Electronics 1/4W 1% 86 Value 860 Piece Resistor Kit

We found 15 Reddit comments about Joe Knows Electronics 1/4W 1% 86 Value 860 Piece Resistor Kit. Here are the top ones, ranked by their Reddit score.

Industrial & Scientific
Electronic Components
Passive Components
Resistors
Fixed Resistors
Single Fixed Resistors
Joe Knows Electronics 1/4W 1% 86 Value 860 Piece Resistor Kit
1/4W 1% Tolerance Metal Film Resistors.10 each of 86 standard E12 values from 0 ohm to 10M ohm.High quality extra thick copper lead wires.Each ohm value individually packaged and neatly labeled for easy organization.Sorted by ohm value. Find each ohm value quickly without reading color bands.
Check price on Amazon

15 Reddit comments about Joe Knows Electronics 1/4W 1% 86 Value 860 Piece Resistor Kit:

u/fatangaboo · 15 pointsr/electronics

Buy this and then Buy this other thing and you'll never need Radio Shack ever again.

u/Leggo0 · 9 pointsr/ElectricalEngineering

These are parts I use consistently in my labs
Capacitor kit


Resistor kit


Jumper wires


Bread board(s)


Larger breadboard. Recommended for larger projects but I haven’t used it too much. Best for large IC circuits


Multimeter. This has all the right features

Other things that can be useful:


•Wire strippers


•Pliers


•Electrical Tape


•Tackle Box or tool bag (to carry everything)


Flat jumper wires


As you get into classes you’ll need specific parts (transistors, logic gates etc) but this should get you started. I use the things I linked in every lab weekly.

Feel free to message me with any questions.

u/gregorthebigmac · 6 pointsr/arduino

Joe Knows Electronics is your friend. 800-some piece resistor kits, each group individually bagged and tagged, comes in a nice compact cardboard box, and it's cheap as hell. I've been using their stuff for a while now, and it's good quality stuff.

u/jmblock2 · 6 pointsr/santashelpers

Has he applied for any jobs yet? I was given one of those leather pads with paper inside and a holder for resumes (something like this) except it was from my undergrad university with their emblem. Definitely gives you some confidence for interviews and recruiting sessions. Also you can get him some nice resume paper to go with it. That lasted me for years.

I also enjoyed having one or two of these demotivational posters in my room. Depends on his humor and if he has barren walls like I did.

If you know more details about which raspberry pi he has, you could get some shield extensions. These are boards that expand its capabilities. There are also newer boards with better specs. Also with two boards you can of course make them talk to each other ;)

Depends on his area of interest and your budget, but you could get him some kind of [introductory FPGA kit] (http://store.digilentinc.com/fpga-programmable-logic/) or DE0-Nano.

Tools... so many tools he might be interested in. USB logic analyzers are so cheap these days and go well with hobby boards. Again not sure your budget, so you can go all sorts of ranges here (Open Workbench Logic Sniffer or scanaplus or Saleae Logic 8 or a china clone of Saleae Logic 8). Saleae or the knockoff I think are the better options for the software compatibility. He may be in need of a soldering iron or a multimeter.

Something else unique, you could get him a "gift card" (they don't really sell them) or an IOU to a PCB printing service. Ask him to design his own board and you'll pay $X of the service. You'll want to make sure he knows the price structure on the website because they charge per square inch and it depends on his design how many layers he may need. He makes the schematic and they will print some circuit boards for him. They won't mount the parts, just do the schematic and he would have to hand solder the components.

If he likes old videogames you could get him some old school USB controllers and tell him to install lakka on his rasberry pi, or just get him a new Raspberry Pi3 to dedicate it as an old-school console emulator. It is quite impressive how many consoles they have emulated.

And back to more tools... more micro screwdriver bits than you would actually need. You can get him a starter pack of resistors, capacitors, and other assorted electronics sparkfun. There are also so many buttons, switches, LED screen displays, etc. that he probably wouldn't want to buy on his own. Maybe you could get a container with an assortment of circuit components (resistors, capacitors, transistors, and other sensors). Careful! This can add up real quick. All types of sensors exist... ultrasonic rangefinder, stress, photocell, temperature, etc. etc. endless!.

u/BrewerGlyph · 3 pointsr/diypedals

I've used assortment packs like this before:

Joe Knows Electronics 1/4W 86 Value 860 Piece Resistor Kit
by Joe Knows Electronics
Link: http://amzn.com/B003UC4FSS

Also search for Elenco

u/huhthatscool · 3 pointsr/aeroponics

I actually didn't tally up the cost as that wasn't really of a concern to me, but I'll try my best to provide links to the things I bought for this. Feel free to add it up for me!

u/GCEmD · 3 pointsr/diypedals

Hi! I built a Beavis Board about six weeks ago. Not terribly difficult to make at all. I purchased these on amazon from Joe knows...

Resistors
Capacitors
Transistors

The problem I have is that some of transistors aren't right for the layouts, the capacitors aren't film, and I couldn't find an assorted IC box.

If I had to do it all over again I would catalog all the parts needed for every project on the projects guide or see of there was a list of items the Beavis Board came with and take that to Tayda or Mammoth. It's a lot of work but will be better in the long run.

I'm definitely interested if anyone else has purchased assorted boxes and how that worked out.

u/LBriar · 2 pointsr/diypedals

It depends on the component. Resistors and caps usually either work or not, and even really cheap sets tend to be within rated tolerances. I just buy the cheapest sets of those that have the values I want.

Transistors and ICs will depend on what you're getting. Common and still produced values are cheap and easy to get. Again, just buy whatever's cheap and gets you what you need. Watch out for fakes or seconds when buying out-of-production parts like 308s or 3007s. Best to get those from reputable places (smallbear, Mammoth, etc), because they're expensive and it's easy to get burned. I'd really look at the values you're getting when ordering ICs and possibly transistors in bulk. Those parts are usually really specific to a build and buying a lot of values might leave you with a bunch of unused parts.

The Joe Knows sets are good, if a little expensive. They tend to be well sorted, which is nice, but not something I'm willing to pay more for. Like this set of resistors is going to be just as good and is significantly cheaper than the equivalent Joe Knows set. There's certainly nothing wrong with the Joe Knows stuff though - if it has the values you need at the right price, go for it.

You can also score some great bulk deals on ebay and alibaba, but you'll be stuck waiting for overseas shipping a lot of the time. I'd go Amazon for an initial order and then shop around when you refill.

u/Shadow703793 · 1 pointr/arduino

> What I was shooting at was more of the specifics, e.g. variety vs 330 and 10k resistors only. Think of it like the emergency kit of arduino :P

No. You WANT a veriaty kit like this if you already don't have one: http://www.amazon.com/gp/product/B003UC4FSS/ when it comes to common parts like resistors, caps, diodes,etc. After getting that, get a bulk order of common ones like say 100,220,1K,22K,etc resistors.

u/Weird_With_A_Beard · 1 pointr/arduino

I ordered this pack last night.

u/structure77 · 1 pointr/arduino

For the organization reason I just got this. Chocked full of values I'll probably never need, but now I have them and at least a way to keep them all organized!

u/CoptorTare · 1 pointr/arduino

I'm a big fan of this kit, mostly because the resistors already come in individually labeled bags, but its a bit more expensive. Amazon

u/ToxicFox2 · 1 pointr/raspberry_pi

Good idea! For anyone who wants to have a set of organized resistors I would recommend this kit. Only $18 in Amazon.

http://www.amazon.com/Joe-Knows-Electronics-Value-Resistor/dp/B003UC4FSS

u/baddays79 · 1 pointr/diypedals

I bought most of the kits from Small Bear Electronics (the exception was the resistor kits). They are one of the only sources I've found for capacitor kits, transistors, op amps, pots, etc and they have some great stuff available.

Link to kits here

Spent about $100 but it took a lot less time than ordering all the items separately on Mouser.

I also bought a resistor kit from Joe Knows Electronics on Amazon.

Link to resistor kit here

I would also recommend buying a component tester, it's one of the best purchases I've made. It makes it feasible to pull all the components off of your breadboard and sort them quickly so you can reuse them. Also very handy in double checking a component value when you're building a pedal without looking at the color coding, etc.

Link to component tester