Reddit Reddit reviews Kano Kroil Penetrating Oil, 8 ounce liquid

We found 9 Reddit comments about Kano Kroil Penetrating Oil, 8 ounce liquid. Here are the top ones, ranked by their Reddit score.

Automotive
Motorcycle & Powersports
Parts
Kano Kroil Penetrating Oil, 8 ounce liquid
Safe for use on metal, rubber, plastic and painted surfacesFeatures a spout for convenient and precise applicationPractically no expiration dateCan be used on a wide range of hardware, tools and equipmentDoes not harden, gum or expire
Check price on Amazon

9 Reddit comments about Kano Kroil Penetrating Oil, 8 ounce liquid:

u/Frostiken · 28 pointsr/MosinNagant
  1. Cap the end of the barrel. I ate a bunch of cheese and made a wax cap. Bonus, you get to eat cheese for this step.

  2. Pour a bunch of Kroil in the breech. Do this outside in case the wax cap doesn't hold.

  3. Let it soak for 24 hours.

  4. Uncap it, pour that foul shit out, go to town with a bore brush. Scrub and scrub and scrub some more.

  5. Rifle is fine. Shoot any remaining corrosion out.
u/minus8dB · 6 pointsr/bicycling

But Kroil is king of the penetrating oils.

u/DaSilence · 6 pointsr/guns

> SVT-40

Is most glorious Russian Rifle.

Will not care if allthread rod is used to remove stuck round fired by filthy capitalist.

Also appreciates lubrication with most glorious KROIL prior to hammering.

u/[deleted] · 3 pointsr/MTB

The caps are not reverse threaded. If the bolt is stuck on, use some WD-40, but if you can get ahold of Kroil, that'd be even better. Just put some around the edges, and let it seep in. Leverage is your friend use it, and if you have to, use a mallet to give the key a little love tap to break it free. Make sure your Alen Key is not rounded, if it is, grind it down, or even buy a new one. If the cap is rounded, you'll have to use a torque key in a size equal or above the equivalent alan key size. They are your best friends when removing rounded bolts.

It looks like your crank arm puller is missing the top cap, and or might not be long enough. So when you're tightening the handle, it's not actually pushing against anything. All crank pullers do, is push/pull the crank off of the spindle. You might need to get a little Macgyver.

Just as a side note: Bottom brackets are revers threaded on one side. A trick to remembering what's what: when you pedal, you're loosening the BB, same with pedals. It's designed that way so that you never over tighten the threads from riding.

u/ImmmOldGregg · 2 pointsr/AbandonedPorn

Shout out to Kroil. https://www.amazon.com/Kano-Kroil-Penetrating-liquid-KROIL/dp/B000F09CF4

u/TitusUMMS · 2 pointsr/guns

If you're running experiments, try Kano Kroil. I haven't had the problem you are dealing with, but it is an excellent bore cleaner and lots of folks swear by it.

u/thatonegentry · 1 pointr/whatisthisthing

Use this and soak it overnight. Should get it unstuck in a jiffy.

u/thencsdc · 1 pointr/HondaCB

Until you tried Kroil, you haven’t tried everything. I started using this after the gunsmiths at Ruger told me it’s the secret weapon on their bench. Good luck, rider.

Kano KROIL Penetrating Oil, 8 fl. oz. https://www.amazon.com/dp/B000F09CF4/ref=cm_sw_r_cp_api_i_JM-PDbQF5G0SQ

u/_Madrugada_ · 1 pointr/guns

Kroil like this?

Does it really work that much better than hoppes?