Reddit reviews Kendal Industrial Grade 165 Watts 2.5 Liters Digital Heated Ultrasonic Cleaner with Degas Function

From what I have read Heated Ultrasonic Cleaners are the most efficient way to speed steep. You don't have to get a heated one, but then you have to switch your juice from a hot bath to the sonic cleaner a few times. I think people run like 3-4 cycles on the sonic cleaner.


But I just got a Milk Frother , and I plan on frothing, heat bath, frothing, heat bath to see if I can get my juice steeped in about 24 hours. I haven't tried it yet though.


Heat bath=boil a pot of water. Let the water sit/cool off for about 10 minutes, then set your open/aerated bottles of juice until the water cools. I can't imagine this would be such a great idea to do with plastic bottles, maybe consider transferring into a mason-style jar or something.

Last batch of juice I made I tried shaking my bottles, then doing 2 heat baths; it doesn't instantly steep, but about 24 hours after the heat bath the consistancy of the juice was that of about 1 week of steeping. So if your working with pre-made juice, this method might be enough to get you a little better flavor and buy you time for the bulk of your supply to steep fully.


Good luck sir!

I went on a little shopping spree for my DIY/rebuildable stuff. Picked up the following:

5 glass beakers, 50-1000ml
4 oz amber glass boston round bottles, pack of 12
2x pack of 6 2oz amber bottles w/droppers
2x 2pack 8oz amber bottles
[labels for bottles] (http://www.amazon.com/gp/product/B00004Z5SM/ref=oh_details_o00_s00_i03?ie=UTF8&psc=1)
100count transfer pipettes
2 10 packs of 5ml blunt tip syringes
Heated ultrasonic cleaner (for quick steeping)

100ft A1 32 AWG kanthal
100ft A1 30 AWG kanthal
100ft A1 28 AWG kanthal
12ft 2mm braided hollow Ekowool
Pair of locking hemostats
butane pencil torch (for torching ekowool)
This genius little invention - everyone should buy this, it was like six bucks

other than that, a couple anyvape mini davide glass clearos because the protank 2 group buy I organized will likely not have a replacable drip tip, and I need at least 2 mini glass tanks that can take my bds60 from captivape.

i need me a fucking workshop, not sure where I'm going to put all this stuff...

https://www.amazon.com/Kendal-INDUSTRAL-DIGITAL-ULTRASONIC-CLEANER/dp/B0018IIPFK/ref=sr_1_7?ie=UTF8&qid=1478232658&sr=8-7&keywords=ultrasonic+cleaner+kendal

I bought this and it was fine for cleaning the BCG. You really need good solution for it to work well, something like Simple Green Pro HD is amazing compared to just soap and water.

I use a Kendal from Amazon. Works great.

I use this one http://www.amazon.com/Kendal-Industrial-Digital-Ultrasonic-Cleaner/dp/B0018IIPFK/ref=sr_1_3?ie=UTF8&qid=1419728850&sr=8-3&keywords=ultrasonic+cleaner

Works great. For water damaged electronics I mix denatured alcohol and distilled water to 80 percent. Finish with a quick dip into pure denatured alcohol and dry under a heat lamp.

I dont charge bench fees. If I bring the phone back to life I charge about 40% of the retail value of the phone.

If the phone got wet and still works but they want to be sure it doesn't get damaged further I charge a flat $45 for a quick teardown, scrub and wash.

I clean jewelry and stuff for customers free of charge while they wait for their phones. I use a different mix depending on material.

The only parts you should be putting in the USC is the motherboard or a daughter board with no microphone/speakers or plastic bits on it. You can wash frames if they are stripped of everything. A hot USC bath will fuck up all the adhesives so be prepared to strip those before hand and replace them.

USC cleaners can be harsh. Dont make the mistake of putting plastics in it. The heat and chemicals will do strange things to them.

In our lab we used this for years day in day out for metallic sample mount prep in between polishing stages. Use a little plastic tray to keep the brass/sample off the piezo (so you don't send the energy back into the transducer) and it will last a long time. It's kinda small compared to a media vibrator but I'm never in a hurry. Don't over load it, less is more in a $80 sonicator but switching to hot water for the sake of solubility did wonders for throughput.

Under $100.

http://www.amazon.com/Kendal-Industrial-Digital-Ultrasonic-Cleaner/dp/B0018IIPFK/ref=sr_1_5?ie=UTF8&qid=1418181881&sr=8-5&keywords=ultrasonic+cleaner&pebp=1418181893490

I'm happy with this model. It's been a workhorse for me for years. I purchased it because it would clean brass casings. My only complaint is the short timer and the heating function is not needed and too hot for e-juice.

http://www.amazon.com/Kendal-Industrial-Digital-Ultrasonic-Cleaner/dp/B0018IIPFK/

Currently leaning towards this: http://www.amazon.com/Kendal-Industrial-Digital-Ultrasonic-Cleaner/dp/B0018IIPFK/ref=sr_1_4?ie=UTF8&qid=1414606240&sr=8-4&keywords=ultrasonic+cleaner

Get an ultrasonic cleaner with a heating function

Don't know what your budget is but something like this http://www.amazon.com/gp/aw/d/B0018IIPFK/ref=pd_aw_sims_5?pi=SS115&simLd=1