Reddit Reddit reviews Klein Tools 11063W Wire Cutter / Wire Stripper, Heavy Duty Wire Stripper Tool for 8-20 AWG Solid and 10-22 AWG Stranded Electrical Wire

We found 21 Reddit comments about Klein Tools 11063W Wire Cutter / Wire Stripper, Heavy Duty Wire Stripper Tool for 8-20 AWG Solid and 10-22 AWG Stranded Electrical Wire. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Hand Tools
Strippers & Crimpers
Wire Strippers
Power & Hand Tools
Klein Tools 11063W Wire Cutter / Wire Stripper, Heavy Duty Wire Stripper Tool for 8-20 AWG Solid and 10-22 AWG Stranded Electrical Wire
Wire Stripper and Cutter cuts and strips 8-20 AWG solid and 10-22 AWG stranded wire with easeCompound action stripping: grip and strip via single-action squeezing motionPrecision machined stripping holes easily remove insulation without damaging the wireRemoves up to 1-Inch (25 mm) in length of the insulation layer (jacket layer) in a single stepTension loaded wire-grip gently holds the cable while retaining cable geometry
Check price on Amazon

21 Reddit comments about Klein Tools 11063W Wire Cutter / Wire Stripper, Heavy Duty Wire Stripper Tool for 8-20 AWG Solid and 10-22 AWG Stranded Electrical Wire:

u/ast3r3x · 21 pointsr/DataHoarder

These are the things I bought. You could get by without some of the wire cutting tools. The crimper is kinda necessary, and I'd definitely buy the molex hand tool for pushing the wire into the SATA connector. Much easier than using a screwdriver.

16 AWG Guage Wire

Wire Stripper (you can get by without this)

Flush Cutter (probably not necessary but nice to have)

Crimping Tool

SATA Power Connector

SATA Passthrough Cap

SATA Terminal/End-of-Line Cap

Molex Hand Tool <-- buy the real thing, mimics on Amazon aren't as good

ATX Header Pins (these are 18 AWG which are a little small for 16 AWG gauge wire)

ATX Header Housing

u/almeras · 8 pointsr/Tools

For most wire, I use an old Klein. It looks like the Katapult, but doesn't have the cutter. For fine wire, I use a Jonard ST-500.

u/Prosaic_Reformation · 8 pointsr/gifs

For small wires, an automatic wire stripper is great. I have one that I got from my dad thirty years ago and it still holds up in hobby electronics. I don't recall the brand, but the handles are similar to channellock blue.

u/MaIakai · 5 pointsr/Tools

https://www.amazon.com/Knipex-1262180-Adjusting-Insulation-Strippers/dp/B003B8WB5U

One of the better ones for the price. Need adjusting every once in awhile.

https://www.amazon.com/Knipex-1240200-Adjusting-Insulation-Strippers/dp/B000R895YM

Is a lot better but double the price.

On a budget? Kleins side cutters are great.

https://www.amazon.com/Stripper-Electrical-Klein-Tools-11063W/dp/B00BC39YFQ

All of these have China clones on Aliexpress. I would avoid them as they dull too quickly or knick the wires.

u/distortedsignal · 4 pointsr/AskElectronics

I'm going to put down "wire strippers", because no one has said that yet. About $30 should get you a good pair. I got this pair for my brother for Christmas, and he seemed happy with them.

u/snyper7 · 3 pointsr/electricians

I'm not an electrician, but I have a pair of those and I hate them. I bought myself a pair of these and haven't looked back once.

u/kowalski71 · 3 pointsr/cars

I know tools so here we go. Focusing on the extras, luxuries, and conveniences. If I don't specifically note a manufacturer/model I probably just grabbed the first Amazon link to make it clear what I'm talking about.

  • 12v impact gun/electric ratchet. These are an awesome luxury for working on cars, much time spent turning ratchets will be saved. Also useful around the house for driving sheetrock screws. I like the Bosch PS41 for bang for the buck and Milwaukee M12 for the full 12v set (they have a ratchet, Bosch doesn't).
  • Fucking magnet trays, how do they work?!
  • Amazeballs stocking stuffers: finger bit adapters.
  • Timing light
  • Torque wrench
  • Dremel. I have the cordless one because every Dremel I've ever broke has failed at the brushes and it has a BLDC but that's actually been a really useful feature for working on cars. Grab and go.
  • 4.5" grinder. Pick your favorite color but you usually can't go wrong with yellow or red.
  • Wobble extensions
  • Hex and/or Torx bit set
  • TS8000 MAP gas torch and bottle. I should've put this higher cause this is crazy useful and everyone needs one.
  • Decent wire strippers
  • Multimeter/DMM. There are various guides out there but I think there's an Extech that's a commonly recommended entry level DMM.
  • If they're into old shit aka carburetors grab an ultrasonic cleaner.
  • Flex head ratchet in your favorite size.
  • Snap ring pliers
u/larrymoencurly · 2 pointsr/MechanicAdvice

Belden brand wire?

Are you using a stripper like THIS KIND from Klein Tools? It's better than other types of strippers, and I use one regularly on Teflon insulated wire (very glossy), which is worse to strip than regular vinyl wire.

u/trm_90 · 2 pointsr/electricians

I don’t use them often, but the Klein automatic wire stripper works good if you are stripping a large amount of wire every day. It is bulky and some people have problems using them and don’t like them, so it may or may not be a good choice for you.

I have used the Klein kurve stripper before and it is decent, but I haven’t used one that goes from 10-24 awg. This model of Klein kurve wire stripper goes from 10-26 solid and 12-28 stranded.

I personally prefer and use wire strippers with thicker handles and use the Klein heavy duty wire stripper because of the thicker handles and I can twist wire and don’t need to carry lineman’s pliers. I don’t strip wire below 14 awg often so I just keep a cheap pair of strippers in my tool bag for those smaller sizes.

u/Spraypainthero965 · 2 pointsr/electricians

Knipex for Lineman's pliers: (with or without crimper). Their grip and cutting edge are significantly better than any other brand I've tried.

Wera for screwdrivers: I recommend the XXL 3 set. For sale here.

I still like Klein for strippers. I use the Kurve everyday and the Katapult for wire with thick insulation like PV wire.

Fluke for your meter. Most people recommend the T5 for basic stuff, but the 323 has a proper clamp and removable leads for the same price.

Knipex Cobras for your channel lock style pliers. These are absurdly good and have saved my ass a couple times.

I also recommend buying a Knipex Pliers Wrench. I own a 7-inch and a 10-inch pair and they're way better than a traditional adjustable wrench.

Stanley newest Leverlock tape measures are just as good as Milwaukee's tape and less bulky for half the price.

Milwaukee's Fastback series are the best utility knives by a pretty wide margin. I use the compact one, but that's a matter a preference.

u/HeloRising · 2 pointsr/DumpsterDiving

Great job. I'd recommend upgrading to automatic wire strippers. They'll change your life.

u/zim2411 · 1 pointr/hometheater

This kind of wire stripper will make stripping them super easy, I've used it at least 200 times for speaker wiring. Don't bother with this kind, I've always found them super awkward to use.

u/remembertosmilebot · 1 pointr/electricians

Did you know Amazon will donate a portion of every purchase if you shop by going to smile.amazon.com instead? Over $50,000,000 has been raised for charity - all you need to do is change the URL!

Here are your smile-ified links:

https://smile.amazon.com/Klein-Tools-11063W-Katapult-Stripper/dp/B00BC39YFQ

---

^^i'm ^^a ^^friendly bot

u/Joscoglobal · 1 pointr/electricians

Klein katapult wire strippers

https://www.amazon.com/Klein-Tools-11063W-Katapult-Stripper/dp/B00BC39YFQ

This is one of those specialty tools that was mentioned. I use mine whenever i have a lot of makeup to do, or when i am doing control work with a lot of wires to land. Most guys don't have a set and wouldn't buy themselves one, so a good option for a gift! Thats how i got mine.

u/csgpro · 1 pointr/electricians

What about these strippers? They cut the insulation almost right through. https://www.amazon.com/Klein-Tools-11063W-Katapult-Stripper/dp/B00BC39YFQ

u/foxpost · 1 pointr/electricians

The young guys love these catapults https://www.amazon.com/Stripper-Electrical-Klein-Tools-11063W/dp/B00BC39YFQ#immersive-view_1542070820113

I prefer the regular strippers myself however

u/The_Canadian · 1 pointr/electricians

I've used it with Romex a bit and braided cable once. If you're going for Romex, the Irwin one (like the one in the video) should work fine. As they show in the video, you basically do it twice. First one for the outer sheath and then again for the individual wires. The nice thing about the one in the video is it's auto-sizing. Just put the wire in and go. The one made by Klein isn't auto-sizing, but it has blades with notches for different sizes. For cord, or thicker cable, I really like the one Klein makes.

Again, I'm not a professional electrician at all. Most of what I've done is using THHN. For that kind of thing, I absolutely love it. I don't know how people just use a knife. That seems slow, but I'm sure there's a technique to it.

u/Cross_22 · 1 pointr/Tools

I prefer self-adjusting strippers, but these are very nice too:

https://www.amazon.com/Stripper-Electrical-Klein-Tools-11063W/dp/B00BC39YFQ