Reddit reviews KNIPEX Tools - High Leverage Diagonal Cutters (7401250SBA)

Every shop is an extension of the philosophy of the person using it. As for tools, everyone finds their own level. A friend of mine uses a jigsaw multiple times per day, where I only pull mine out once a week. We make much the same kind of things. I advocate buying inexpensive versions of tools you think might be useful to you. When they prove useful, go ahead and invest in the best version you can afford- it will last for years, if not decades. I'm amazed at how often I use my hardened jaw Knipex nippers:
https://www.amazon.com/7401250SBA-10-Inch-Leverage-Diagonal-Cutters/dp/B000X4MPAQ/ref=sr_1_2?s=power-hand-tools&ie=UTF8&qid=1466548721&sr=1-2&keywords=knipex

Cuts through piano wire all day long and don't dent. Cuts through coat hangar wire (one of my favorite materials on the planet) like it's butter.

Good luck!

Always wear a mask. Even if it does not have asbestos, gypsum dust in not good for the lungs.

I know that diagonal cutters do not cut perfectly flush. Get a good pair of high leverage pliers, and cut as close as possible. Once the sheetrock goes up on the wall, the little pieces of wire will be hidden forever:

https://www.amazon.com/7401250SBA-10-Inch-Leverage-Diagonal-Cutters/dp/B000X4MPAQ

Tell brother to take a mega boatload of pictures, please. This is an important time in your family's life, and deserves to be documented.

Snap on sells knipex pliers, dykes, etc. If you don't own any knipex stuff, it's great.

My person favorites are these:


https://www.amazon.com/7401250SBA-10-Inch-Leverage-Diagonal-Cutters/dp/B000X4MPAQ


https://www.amazon.com/KNIPEX-Tools-00-20-US1/dp/B000X4KNTG/ref=sr_1_5?s=hi&ie=UTF8&qid=1526243314&sr=1-5&keywords=knipex+plier+set


Snapon sells these with their logo on them, I've worn a few sets of the pliers out, the dykes I generally lose before I wear them out.... They are great for cutting through shift cables and doing drum brake work.

"Dikes". Believe it or not, those are diagonal cutters.

https://en.m.wikipedia.org/wiki/Diagonal_pliers

Look under "jargon".

Also, as an aside, if you want high quality "channel locks" look no further than a German brand called Knipex (pronounced Kinnepex). I'm partial to the push button Cobra plier, but the more traditional "water pump plier" is also excellent. They cost a lot more than Channel Lock, but they have excellent leverage and really tough jaws that are narrow enough to fit into spaces other brands can't reach.

They also make a tool called the Pliers Wrench that replaces your adjustable crescent wrench and doesn't slip, need constant adjustment or round off corners.

Finally, their high leverage "dikes" get extremely high ratings.

Sorry to sidetrack you with a sales pitch, but I got excited when I read that you were starting to shop for better tools. If I had known about this brand ten years ago, I would have bought them first instead of wasting my money on cheaper tools.

Here is the desktop version of your link

Here are some links. Most of these are things that if someone had, they wouldn't mind having doubles or whatever. Most of them I own or have used and liked. Many of them can be found at big box stores but all of these should contain brand and picture..

Like, the utility knife is a particular one that is really nice, both brand and style. Super handy for cutting thick insulation.

http://www.amazon.com/DEWALT-DWHT10045-Single-Blade-Snap-Off/dp/B0051QIA3C

Can't go wrong with knipex cutters. Anything knipex is pretty good. Without knowing more details on what they are into, this is a decent all rounder.

http://www.amazon.com/gp/aw/d/B000X4MPAQ/ref=mp_s_a_1_2?qid=1418895942&sr=8-2&dpPl=1&dpID=31TAs95wNXL&ref=plSrch&pi=AC_SX200_QL40

Things always need oiling. Hinges and ball bearings and stuff.

http://www.amazon.com/gp/product/B000KKHNU0
(Plus)
http://www.amazon.com/Liquid-Kroil-Penetrating-Lube-Aerosol/dp/B00EINDJSU/

One screwdriver that serves many functions in one small, cheap package:

http://www.lowes.com/pd_170991-86580-SF14_4294857608__?productId=1221941

A tape measure that has the decimal / fractional written on it. I can read a normal one, but I find work with my Lufkin more accurate and less transposed bits.

http://www.amazon.com/Lufkin-QRL625MP-Vertical-1-Inch-25-Feet/dp/B004R1JPEA/

Ball end metric allen wrenches with screwdriver handles. They make many sets ( standard, etc)

http://www.amazon.com/Bondhus-10687-Balldriver-Screwdrivers-ProGuard/dp/B0006O4ADI

These clamps are decent and cheap for both woodworking and metalworking. Irwin is a nice namebrand but it's a lot more money for just a clamp.

http://www.harborfreight.com/hand-tools/clamps/11-inch-swivel-pad-lock-grip-pliers-39535.html

Metalworking with flat stock.. you often have some holes that need to be drilled from a template to a thing. These center in the hole and transfer the marks. (Using the clamp helps too)
http://www.harborfreight.com/28-piece-transfer-punch-set-3577.html

Good quality headlamp with a red mode. I like the red mode for outdoorsy things. Non red mode lamp people are jerks when they turn and talk at you and blow your night vision.
http://www.rei.com/product/866955/petzl-tactikka-plus-headlamp

https://www.amazon.com/7401250SBA-10-Inch-Leverage-Diagonal-Cutters/dp/B000X4MPAQ

I think these are the same.

I just bought this utility knife last week and i [explitive] love the thing.

I bought these knippers and this rivet setter for rivets.

will yours pop right thru 1/4" all thread?

because these will all day https://www.amazon.com/7401250SBA-10-Inch-Leverage-Diagonal-Cutters/dp/B000X4MPAQ/ref=sr_1_2?ie=UTF8&qid=1478499990&sr=8-2&keywords=knipex+diagonal+cutters

trust me

edit:wow that sounded dickish

but its true and super useful