Reddit Reddit reviews Krylon K07020007 10.25-Ounce Easy Tack Repositionable Adhesive Spray

We found 7 Reddit comments about Krylon K07020007 10.25-Ounce Easy Tack Repositionable Adhesive Spray. Here are the top ones, ranked by their Reddit score.

Krylon K07020007 10.25-Ounce Easy Tack Repositionable Adhesive Spray
Easy tack repositionable adhesive is non-wrinkling, low odor adhesive provides a repositionable bond on most lightweight materialsWorks on wood, Paper, metal, plastic, craft foam, glass, plaster, fabric, trims, glitter, photos and moreAllow your material to be adjusted, removed and reapplied throughout the Life of the bondExtremely flammable; contents under pressureComes in 10.25 ounces aerosol can
Check price on Amazon

7 Reddit comments about Krylon K07020007 10.25-Ounce Easy Tack Repositionable Adhesive Spray:

u/razerzej · 6 pointsr/DMAcademy

I use a projector, but I get that not everybody has a projector or HDTV they can use for D&D.

Have you considered printing your map to scale, then cutting out individual rooms? You could spray the backs with repositionable adhesive so they'd stay affixed to your table, then peel them off as needed.

u/screwikea · 3 pointsr/woodworking

Search for "low tack adhesive". This was the first result I got, and it looks like it will do the trick.

u/MakinCakeNBacon · 1 pointr/Bioshock

Spray on Easy Tack.
Used to do alot of stenciling.

u/Bullywug · 1 pointr/ParanoiaRPG

I finally got all 110 playing cards for the Red Clearance edition finished. The instructions that come with them absolutely suck. Even special non-warping glue for paper warped the cards. So here's what I settled on.

  1. Using a straight edge and razor on a mat, cut out only the outside of the cards. Don't cut the lines between the cards.
  2. Take the block of 3 cards and crease them backwards so that the blank side of the paper is on the outside, and then let the paper open up so it makes a slight V shape.
  3. Go outside or to a well-ventilated area. Make a little stand to hang your paper one sheet at a time. I used clothes hanger wire and binder clips with some trash bags behind it. Hang up a sheet of paper and lightly spray the blank side with spray adhesive like this. You don't want to lay it on the ground because the excess glue will stick the printed side.
  4. Starting at the crease, very gently fold the sides with adhesive together. Be careful not let the outer parts touch too early or it will stick, and you might have to reprint it.
  5. After the adhesive dries, cut the cards individually while clean up the edges.
u/forgotpassword69 · 1 pointr/bleachshirts

some folks are using plastic as a mask but using a tack spray "makes things sticky" found at art stores to place plastic on shirts. http://www.amazon.com/Krylon-10-25-Ounce-Repositionable-Adhesive-Spray/dp/B000A8AYO4

u/harbichidian · 1 pointr/MouseReview

You can also try light spray adhesive, like Krylon Spray Tack.

u/SkyNinja7 · 1 pointr/bleachshirts

I've never tried it myself, but most people use use a repositionable spray adhesive. Here's one that Krylon makes: http://www.amazon.com/Krylon-2-Ounce-Repositionable-Adhesive-Spray/dp/B000A8AYO4/ref=sr_1_2?ie=UTF8&qid=1394748738&sr=8-2&keywords=removable+spray+adhesive

3M also makes one, and I'm sure a couple other companies do as well. It might leave the shirt slightly sticky right after you take it off, but any residue should come off in the wash.