Reddit reviews Lansky Universal Mount LM009
We found 6 Reddit comments about Lansky Universal Mount LM009. Here are the top ones, ranked by their Reddit score.
Universal device from cutlery sharpening company LanskyTwo-piece mount optimizes Lansky Sharpening SystemsProvides strong base and increased sharpening leverageMade of lightweight, strong aluminum with pre-drilled base; stows in included kit case for easy storage and transportIncludes limited one-year manufacturer's warranty
The Spyderco Sharpmaker is a great knife sharpener to use. I believe it has 15 and 20 degree angles.
There is an alternative(and cheaper) Lansky Turnbox That sharpens at 20 and 25 degree angles. These two systems are great to travel with.
​
If you want a beginner sharpening system you could get a Lansky System but if you ever get higher end steels you will need to upgrade to Diamond system. You will also need to get a Lansky mount or clamp. It also has a wide variety of accessories and stones.
​
You can also get Fixed angle knife shapener that is like an apex edge. If uses the same stone size so you could order upgraded plate sets at a cheap price.
The system that I have been using is the 5th Gen Sharpener. It uses the same stones and plate size as an Apex as well. The only downside is the that it takes forever to arrive from china.
I have a sharpening system that lets me choose one of four angles. It's branded as Lansky.
https://www.amazon.com/gp/product/B000B8IEA4/ref=oh_aui_detailpage_o03_s00?ie=UTF8&th=1
https://www.amazon.com/gp/product/B000B8L6NG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
The second link is a stand for the knife clamp. It works really well to get super sharp edge, even without stropping.
I've had a lot of luck with the Lansky Sharpening system. I also recommend the little spindly mount if you don't have a vice. It isn't really necessary, but I find it makes sharpening a lot easier.
There are a lot of videos out there, but this is the one that helped me the most. I know it's not recommended to sharpen a knife by moving the stone backwards (from tip to handle) but I've tried to replicate his methods and had fantastic results.
That said, it takes some practice to develop a feel for how much pressure to apply and what motions to use. It took me about a month of not-really-sharpened knives to realize that I wasn't using anywhere near enough force with the coarser stones to form a burr. This guy outlines how to feel a burr pretty well (the whole video is a bit long, but definitely helps with some little tricks.) I also run my nail along the length of the blade to feel for a fully-formed burr.
Other than that, just keep practicing and trying new techniques, and find what is most comfortable and efficient for you.
This one: http://www.amazon.com/gp/product/B000B8IEA4/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
With the stand: http://www.amazon.com/gp/product/B000B8L6NG/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
https://www.amazon.com/gp/aw/d/B000B8L6LI/ref=mp_s_a_1_3?ie=UTF8&qid=1511067414&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=lansky+kit&dpPl=1&dpID=51RQXn40slL&ref=plSrch
+
https://www.amazon.com/gp/aw/d/B000B8L6NG/ref=mp_s_a_1_4?ie=UTF8&qid=1511067237&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=lansky+kit&dpPl=1&dpID=51BaDAQP9dL&ref=plSrch
Lansky Deluxe 5-Stone Sharpening System https://www.amazon.com/dp/B000B8IEA4/ref=cm_sw_r_other_apa_p9d2xbBC45P66
You'll also need the stand for it.
Lansky Universal Mount https://www.amazon.com/dp/B000B8L6NG/ref=cm_sw_r_other_apa_k-d2xb4JWBZES
Watch some tutorials on YouTube to find all the little tricks for it. The big thing is that you will essentially have to reprofile any edge the first time use the shapener on it. After that you can just touch it up with the finer stones.