Reddit Reddit reviews Lasko 100 MyHeat Personal Ceramic Heater, Compact, Black

We found 62 Reddit comments about Lasko 100 MyHeat Personal Ceramic Heater, Compact, Black. Here are the top ones, ranked by their Reddit score.

Space Heaters
Home & Kitchen
Heating, Cooling & Air Quality
Lasko 100 MyHeat Personal Ceramic Heater, Compact, Black
KEEPS YOU WARM AT WORK – At 200-Watts and 682 BTUs, this low wattage mini space heater is ideal for use under the desk to keep your feet and legs warm. Best of all, because it’s low wattage, it won’t keep tripping the office circuit breaker every time you turn it on.YOUR PERSONAL SPACE HEATER – At 6 inches tall with a 4” x 4” footprint, this cute, small electric heater takes up minimal desktop space and is intended to heat up your immediate space at home or the office. Designed to warm you, not a room. For that, we recommend getting a Lasko 1500-Watt tower heater.EASY TO USE – No assembly required. Simply take it out of the box and plug it in to a standard 120v wall outlet. This energy-efficient, indoor ceramic heater draws about 2 amps and turns on with a flip of a switch. Compact and portable, MyHeat comes with a 6-foot cord and a 2-pronged plug. It’s also easily stored when not in use.YEAR ROUND USE – Tired of always being cold at work in the winter? Is your cube right under the AC vent in the summer? If this sounds familiar, then this little heater is just what you need to keep you comfortable year-round. Produces a quiet, white noise that won’t disrupt your co-workers. MyHeat is available in 4 fun colors (black, white, blue, and purple) and makes for a great gift.TRUSTED FOR GENERATIONS – Lasko has been making quality products for over 100 years. MyHeat is ETL Listed and comes with Automatic Overheat Protection. The on/off switch lights up to let you know the unit is on. The self-regulating, safe ceramic heating element keeps the exterior cool to the touch – taking the worry out of using the heater for long periods of time.Lower power useage saves on your energy bill and helps to elimanate tripping the circuit breaker if multiple heaters are used in an office setting.
Check price on Amazon

62 Reddit comments about Lasko 100 MyHeat Personal Ceramic Heater, Compact, Black:

u/piratelax40 · 25 pointsr/learnprogramming

small portable space heater like this less than 20 dollars and put it right by your keyboard to blow hot air on your hands?

u/bubonis · 13 pointsr/ferrets

I'm sorry to hear about your fuzznoodle. :-(

  • Treats. Spoil him rotten. Most ferrets that I've encountered have love for things they shouldn't have like peanut butter, honey-nut Cheerios, and raisins. Don't skimp on the FerretVite or FerreTone.
  • Build a (sterile) dirty dig box. Use bagged topsoil to create sterile soil, load up a large plastic bin, and let him go nuts. He will create a huge mess and will likely be engaged for a long time, but he will find it endlessly entertaining and won't want to leave. If you're lucky (and he's got the energy) he may even create a small burrow in/under the soil.
  • Physical contact. Pet him, hold him, carry him. I have a small hip bag that's specifically designed to carry a ferret, and a quick look on Etsy shows similar contraptions (plus a "neck bag" that's sort of like a scarf with a ferret-sized pocket in it). Let him sleep when he wants and don't hold him if he wants to run around, but let him know you're there.
  • Introduce him to new or rarely-seen environments. My ferrets live in a playpen/cage environment but every once in awhile I bring them into the living room and they go nuts from being in the new space. Let him run around a place he's normally not allowed in (provided the space is safe for him).
  • Make sure his sleep space is dark, warm, and comfortable. If he sleeps in a cage, drape a heavy towel or blanket over it to keep light out and warmth in. If the cage is in a drafty area, set up a small personal heater outside the cage to gently blow warm air into the covered cage. My ferrets have this one outside their cage which keeps things toasty-warm. They adore it.
u/somethin_brewin · 7 pointsr/Homebrewing

You may be right. If it got cold enough, you could have frost in a line or faucet. That'll make a nucleation point and draw a lot CO2 out of solution.

You could add a little heater to the fridge and set it with a temperature controller.

u/ItsBrianOnReddit · 7 pointsr/Homebrewing

This is the gold standard for a lot of us:

https://www.amazon.com/dp/B003XDTWN2/ref=cm_sw_r_cp_apa_jYJLybPEEVZT1

Best thing I ever did was to build a BrewPi and install that heater in a chest freezer.

u/culiseta · 6 pointsr/BuyItForLife

I'd consider this. Black or white. Very good for office settings. Only 200 watts, just to maintain a warm breeze.

http://www.amazon.com/gp/aw/d/B003XDTWN2

u/pendejadas · 5 pointsr/Homebrewing

https://www.amazon.com/gp/product/B003XDTWN2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1


working pretty well for me:
http://i.imgur.com/2xpfOa3.jpg


I'm using a chest freezer as well, the seal on the lid is flexible so I just have the cables coming out under the lid, temps are holding easily

u/McWatt · 5 pointsr/Homebrewing

Perhaps one of those personal sized space heaters. It will help move the air around in there too.

u/banksjh · 4 pointsr/Homebrewing

I use this 200 watt heater from Amazon. http://www.amazon.com/gp/product/B003XDTWN2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

I'd be worried about using anything higher wattage than this in such a small space. I think hair dryers can pull well over 1000 watts which is a serious fire hazard in such an enclosed space.

u/VolsPE · 4 pointsr/Homebrewing

Fermenter

I would recommend any of the wide mouth, plastic fermenters. IMO they're all pretty similar. They are so easy to clean. Just make sure you only use a soft rag or sponge. Don't use anything remotely abrasive.

Heating Element

I use this guy. But that's only for heating the entire chamber. It doesn't put out a lot of heat, and I haven't tried using it in the full harshness of winter, with temps in the single digits. I like the heat belt idea, but most of my brews are 10+ gallons split up into multiple fermenters, so I try to keep the entire ferm chamber the same temperature.

Gloves

Two suggestions: Those Blichmann gloves look better than what I use.

But also, consider sparging instead of squeezing. I suspend my brew bag above the kettle, and I do a super lazy "sparge." I just have room temperature, pH and mineral adjusted water on hand. And I just pour it slowly into the top of the brew bag.

It sounds like a terrible technique, and maybe it is. But my efficiency jumped quite a bit once I started doing this. And I don't have to screw with squeezing a super heavy, steaming hot grain bag over my head.

u/ganjananda · 3 pointsr/microgrowery

I have a 2'x4'x4' tent in an attic -- right by the soffit no less. I have two of these: My Heat Personal Ceramic Heater, one on each end of the tent by the air intake. Makes a huge difference and has relatively low power consumption.

I also wrap my tent in a blanket and layer some cardboard to add insulation. Regardless of the air temperature, you're going to lose a lot of heat through the tent walls, and the branches closest to the walls will suffer. A little bit of insulation can make a big difference.

u/Discover2010 · 3 pointsr/BeardedDragons

First get a Infrared Thermometer. Here's a pen one for $10 on amazon

Then get another heat source. I use a mini space heater like the one shown here to bump up the ambient tempurature of the the whole tank to 80 and under the heat light to 110 . I got mine at Walgreens for under $20. You might check there today because if your beardie is vomiting that is a very bad sign and waiting 2 weeks on shipping could be dangerous.

Most people use a ceramic heat bulb like this though: http://www.amazon.com/Zoo-Med-ReptiCare-Ceramic-Infrared/dp/B0002AQCPK/ref=sr_1_2?ie=UTF8&qid=1420993530&sr=8-2&keywords=heat+light+ceramic

u/shortyjacobs · 3 pointsr/Homebrewing

Is your keg in the garage? Where do you live?

It can easily freeze if it's cold enough. I live in the Twin Cities MN. I need a heater in my kegerator in the winter (it's in my garage), or else it easily freezes solid. Does your inkbird have both a heating and a cooling circuit? IF you live in a cold area and your keezer is outside, get one of these https://smile.amazon.com/Lasko-100-MyHeat-Personal-Ceramic/dp/B003XDTWN2/ and plug it into the "heat" part of the inkbird....that way this wont happen again.

That's a bit crazy though - I've had a bunch of kegs freeze solid - never had one overflow though.

u/RARNC · 2 pointsr/Homebrewing

It'll be heated too, ordered one of these guys: http://www.amazon.com/gp/product/B003XDTWN2 along with some 120v 120mm fans to move the air around.

It's likely I'll throw a collar on it too since I can't leave anything alone. :)

u/holybarfly · 2 pointsr/Homebrewing

A tad more expensive then a bulb and paint can, but I use this small heater and it works awesome.

u/TheDunadan · 2 pointsr/GlobalOffensive

Buy a small 200 Watt heater, and put it behind your mousepad. It's worked quite well for me.

u/TheGremlyn · 2 pointsr/Homebrewing

Happy to answer any questions people may have!

I'll start with a link to my build post: http://beer.thegremlyn.com/2015/07/02/fermentation-chamber-build-circa-2011/

Temperature Control

The chamber was built to use the cooling system from an old mini fridge, the kind with the coils on the back instead of integrated into the walls. I started with a Ranco controller for cooling only. I lived in a climate where it didn't really get cold, so heating was not required. I now live in a climate where not only does it get cold, but the fermentation chamber lives in the garage so it has to be heated.

I built a dual stage controller using an STC-1000 in a tool box: http://imgur.com/a/rDe8P and bought the Lasko Personal Space Heater, which I view as excellent because it not only heats but has a built in fan.

I also added two fans to the system to make sure the temperature is even in the chamber. One is always on, the other only when the cooling system kicks in. That means that when heating or cooling there are two fans runnings.

Build Design

I needed two things in a fermentation chamber: 1) space for two sanke kegs, which I use to ferment my 11 gal batches, and 2) front loading because I refuse to try to lift 11 gal of beer in a sanke keg up and over the rim of a chest freezer.

I plan to rework the door to be a single door for better sealing, but it holds temps well enough right now that I don't worry much and it is a low priority change. I originally did two doors as it wasn't going to be feasible to have one where it was designed to live.

u/CloneWerks · 2 pointsr/ender3

They make a nice little 200 watt heater that is awesome for applications like this.

Link for reference

Lasko 100 MyHeat Personal Ceramic Heater, Compact, Black https://www.amazon.com/dp/B003XDTWN2/ref=cm_sw_r_cp_tai_5l.YDb8VXF4Z9

u/manponyannihilator · 2 pointsr/Homebrewing

I have two outdoor fermentation chambers in Alaska, gets to -40F. That means when I ferment with Kveik the temp difference can be >120 degrees.

My chambers are chest freezers. I use a reptile bulb to make large swings in temp (no safety switch) and this to maintain.

The desk heater turns off if it rips or if it has been on for a long time.
It barely costs anything to heat and have not had any problems in my 3 winters of doing this.

u/snarfy · 2 pointsr/FixMyPrint

Warping is caused by uneven cooling. As the top layers cool, they shrink and pull on the lower layers. The trick is to minimize the difference between the extruding temperature and the ambient temperature in the chamber. For ABS at 240c you want the chamber around 80c, but any heat helps. This will cause everything to cool more gradually and evenly, reducing the chances of warping. Increasing the heated bed temperature can also help for the same reasons.

I put two 4ohm 50W power resistors on a cpu heatsink to make a small heater, but if I were doing it again I'd just make one of these things blow into the chamber. My heater is 72W, that one is 200W.

u/mlwarren88 · 2 pointsr/Frugal

I picked up one of these before it got too cold this year. I keep it under my computer desk and run it sometimes when I feel cold. It's only 200 watts and keeps me decently warm. I have one of these that works well too. The second heater has a low and a high setting (700W, 1500W) and I can heat an entire room with it. When I used it I would turn it on and off depending on the temperature of the room. I use it less now that I have the 200 watt heater because I don't feel so bad running a 200 watt heater constantly. I'd go with the first one if you're wanting to heat yourself, and with the second one if you want to heat the entire room. Running the 200 watt heater is like having two old school light bulbs on, I don't feel too guilty about its power consumption.

u/boxsterguy · 2 pointsr/Homebrewing

This is why I went all out and got a chest freezer. I paid $100 for a 5cuft freezer on Black Friday that comfortably fits a 7 gallon Fermonster with plenty of room to spare. Add a temperature controller and a heat source (I'm partial to small personal space heaters) and for less than $200 you get full control over fermentation and cold crashing.

I haven't intentionally lagered anything yet, but I have let beers sit in cold crash for 2+ weeks while waiting for a keg to blow. I guess that's basically lagering.

u/thegreybush · 2 pointsr/Homebrewing

according to their website, the Inkbird STC-1000 can power appliances up to 10 amps at 120 volts. This gives you 1200 watts. What you are trying to power is pretty dang close to the upper limit, I don't think that I would do that if it were me.

In the rare occasion that I actually need to add heat to my fermenter, I use a small 200 watt space heater. This works well because it adds just enough heat, and it also has a fan that keeps things consistent in my ferm chamber.

u/bildonia · 2 pointsr/Homebrewing

I use this little space heater with an InkBird controller.

u/mattsupreme · 2 pointsr/GlobalOffensive

This looks neat and would be cool at lans but I don't think there's a big enough need for a product like this. You've got $20 heaters like this on amazon that are tiny and good enough if people were looking for a solution to this problem.

I obviously could be wrong, just my quick thought.

u/rugged_D · 2 pointsr/Homebrewing

Im in ny and i use this cheap lasko heater along with my inkbird it keeps temps within 1 degree of target

u/kungfujohnjon1 · 2 pointsr/Homebrewing

You can find a chest freezer on Craigslist for almost nothing.
I use this tiny space heater for heat. It turns off automatically if it gets too hot, so I’m not worried about it burning down the garage, and it works really well. And everyone loves the Inkbird ITC-308. It’s cheap as all hell and has separate plugs for heating and cooling. That’s pretty much everything you need.

u/newgirlie · 2 pointsr/MechanicalKeyboards

I have this at work next to my keyboard and it keeps my hands pretty warm.

u/BrewCrewKevin · 2 pointsr/Homebrewing

Yes, a heat lamp will work fine.

Many people also wire an incandescent light bulb and cover it with a coffee can. Those heat up pretty nicely too.

If you need it to pump out a lot of heat in the winter, I've heard This guy works well.

u/FuzzeWuzze · 2 pointsr/Homebrewing

Lasko Personal Heater is by far the best option IMO, its a heater and fan built in and has automatic thermal shutoff in case your fermentation controller fails.

Those paint can things scare the shit out of me knowing how fast and hot even low wattage light bulbs get. Ive had my STC1000 fail and get stuck on heat, luckily i was using the Lasko and when it hit its thermal shutoff(110F i think) it shut off and wont come back on until you manually switch the power switch off for 15 seconds then back on, even if power to it is cycled on and off by the controller it wont come back on.

I can only imagine the damage that could have been done if a light bulb can was stuck on for the entire weekend when i was away. Best case it would have melted my carboy and inside of my fridge before popping from the heat, worst case a fire.

Besides without a fan any other indirect heat source is worthless.

u/Deaneaux_ · 1 pointr/Homebrewing

I've been using this guy, but it seems that it overheats and is off more than it is running. I know that there are several brewers that swear by it, but it just doesn't work for me for some reason.

I plan on switching to the 60W light bulb in a paint can setup very soon.

u/MoonbeamThunderbutt · 1 pointr/CPTSD

I'm so sorry they have you in such a cold spot at work. Definitely talk to someone about it! You have a right to not be freezing! Also, if you can, I have this little under-desk heater and would really recommend it. You deserve to be warm!

u/moveslikemusic · 1 pointr/Homebrewing

First recipe will be a Pale. I'll post details and updates. Just finishing a new larger fermentation chamber. I threw this into a 7cf chest freezer.

http://www.williamsbrewing.com/CONTROLLER-III-COOLING-HEATING-CONTROL-P3616.aspx

For the heat source I am trying this.


Lasko #100 MyHeat Personal Ceramic Heater

http://www.amazon.com/gp/product/B003XDTWN2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1


u/kernelsndrs · 1 pointr/Homebrewing

Another vote for DIYBrewPi.

I'm using a Chest Freezer and this small space heater based on it's safety features.

u/outrunu · 1 pointr/Homebrewing

www.amazon.com/gp/aw/d/B003XDTWN2/ref=oh_aui_i_sh_in_o0_img?ie=UTF8&psc=1

u/Ask_Seek_Knock · 1 pointr/Random_Acts_Of_Amazon

Personal Heater listed high $18.62 from his Things wish list. Knight and a Dragon $6.29 from his For the kids list

u/kb3pxr · 1 pointr/talesfromtechsupport

I don't see why office dwellers need 1500 watt space heaters unless the heating system in the office is down completely (and even then when I was issued one I used the 750 watt low setting most of the time).

It may be possible to satisfy some users with a fraction of the power. IN FACT They make space heaters specifically for this use, currently there are two models that I have found:

u/aesthetics247 · 1 pointr/microgrowery

What about this as a suggestion?
https://www.amazon.com/Lasko-100-MyHeat-Personal-Ceramic/dp/B003XDTWN2

go with this 200w heater

and a temp outlet thermometer like this
https://www.amazon.com/Inkbird-Itc-308-Temperature-Controller-Thermostat/dp/B011296704/ref=sr_1_1?s=hi&ie=UTF8&qid=1482432154&sr=1-1-spons&keywords=outlet+thermostat&psc=1
so the heater comes on when your room dips below a certain temperature.. and so it turns off at the right temp as well.

u/c00ki3znkr34m · 1 pointr/AskEngineers

You really think a tiny CPU heatsink on a 15w heating element is going to heat my room better than a small boiling water system? That's amazing because boiling water and steam gets SO HOT, right? I thought if I could somehow make a boiling water tank, well insulated, it would do a better job, no?

Any other heating cost-effective ideas here for simplicity / effectiveness of heating a small room? Thank you, you rock. I intuitively feel like a giant ass pipe with steam in it is going to do a much better job still... I have one of those 200w heating elements with a fan on it, it doesn't do a dent to the room temp. https://www.amazon.com/Lasko-100-MyHeat-Personal-Ceramic/dp/B003XDTWN2/ref=sr_1_1?ie=UTF8&qid=1480973735&sr=8-1&keywords=lasko+my+heat

u/thetransportedman · 1 pointr/Homebrewing

This heater

u/zadaz · 1 pointr/firewater

Its really not that hard.

Inkbird itc 308

Heater or any other 200-300watt heating element that wont burn down your shed. Not a fan of brew belt, but might work good, just make sure to stick the probe on the fermenter or make a thermowell.

Now you just need an insulated place to put it all, old fridge is perfect, since in the summer time you can use to to keep the mash cool. But guess you could also insulate some kind of box/closet or just build something out of plywood/styrofoam plates pic

I've not yet built a still, but been brewing beer for a few years, and the ability to control fermentation can lead to a cleaner product, which I would guess makes a mash with less nasties.

u/midnightsnacks · 1 pointr/GlobalOffensive

Ah excellent question, this is one that I have been struggling with ever since I started playing CS GO. I recently went out and bought one of these bad boys Lasko MyHeat. It costed me 20 bucks at my local Lowes store. I basically turn it on when my hands start getting cold and just play with it turned on. It can get pretty warm if it's sitting close to you, so I usually just turn it off as soon as my hands warm up. It's pretty compact so it just sits on the edge of my desk, granted my desk space is pretty big.

u/horrorslice · 1 pointr/pcgaming

I use this at home and work, and it works great. Only a few hours at home not to kill my power bill.

u/tarrosion · 1 pointr/pcgaming

Keeping your core warm is definitely key. You could also get a small personal heater like this one (just the first hit on Amazon, don't own it personally).

Alternatively, there are heated keyboards.

u/daviid_aron · 1 pointr/SolarDIY

Thinking about getting one of these heaters and the truck camper I bought didn’t have the heater so I was looking for an alternative I’ll probably just end up buying a propane heater
Lasko Model 100 MyHeat Personal Space Heater, Black - Compact Size, Ideal for the Desk or Around the Home Office https://www.amazon.com/dp/B003XDTWN2/ref=cm_sw_r_cp_api_i_hY5CCbF6WY6QD

u/bigattichouse · 1 pointr/OffGrid

Maybe just a 200Watt spot heater?

https://www.amazon.com/Lasko-100-MyHeat-Personal-Ceramic/dp/B003XDTWN2

or an electric blanket.

u/My_Post_Is_On_Topic · 1 pointr/pcgaming

Just buy a little electric mini heater like this and put it on your desk.

Problem solved for less than twenty dollars.

Or if you want to solve it cheaper, buy fingerless gloves or go to CVS and buy their two dollar mittens.

u/PackagedMilk · 1 pointr/Homebrewing
u/PM_YOU_MY_WORRIES · 1 pointr/Accounting

I've used this for the past few years: https://www.amazon.com/dp/B003XDTWN2/ref=twister_B00P6ZAUAY?_encoding=UTF8&psc=1

It's small, it's quiet, it's perfect.

I also keep a light vest draped around my chair for when it gets a little too chilly. The vest keeps me warm while my hands are free to blaze through dem sheets, namsayin?

u/widgetjam · 1 pointr/Homebrewing

No way not for beer. All you need is a cheap craigslist freezer/fridge, this controller and this heater. You could put it all together for about 100 dollars, maybe add a usb computer fan for better circulation.

u/UserM16 · 1 pointr/bikecommuting

I have the same heater! For those that may not know, this heater is really really weak unless you're almost touching it. I doubt that it'll damage those shoes.

u/-Kaptivate- · 1 pointr/GlobalOffensive

buy one of these, they are cheap and heat up within 10 seconds https://www.amazon.com/Lasko-100-MyHeat-Personal-Ceramic/dp/B003XDTWN2

u/gwbuffalo · -1 pointsr/starcraft

>The friction from high APM will keep your hands warm.

I'm guessing this is a troll attempt. You will see Korean pro gamers with hand warmers and stuff. Only a few days ago Reddit had a blast watching MC shake his hand warmer. APM has nothing to do with it. It's circulation.

If your hands are slanted up, blood is going to have a harder time getting to your fingers. If you get a setup where your wrists are slanted slightly down, you will see a difference.

If you're like me and don't want to go through the hassle of redoing your ergonomic setup, just buy 2 small space heaters and put them on both sides of your desk. That's what I did. Works pretty well for keeping my hands warm. I prefer this to turning up the heat in my apartment, since I enjoy a pretty cool ambient temperature.