Reddit Reddit reviews LEDMO SMD5630 LED Strip, 16.4Ft, 300LEDs Warm White 3000K, DC12V Waterproof IP65, 25LM/LED, 2 Times Brightness Than SMD5050 LED Light Strip, LED Strip Light

We found 11 Reddit comments about LEDMO SMD5630 LED Strip, 16.4Ft, 300LEDs Warm White 3000K, DC12V Waterproof IP65, 25LM/LED, 2 Times Brightness Than SMD5050 LED Light Strip, LED Strip Light. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Lighting & Ceiling Fans
Novelty Lighting
LED Strip Lights
LEDMO SMD5630 LED Strip, 16.4Ft, 300LEDs Warm White 3000K, DC12V Waterproof IP65, 25LM/LED, 2 Times Brightness Than SMD5050 LED Light Strip, LED Strip Light
High Quality 5630 SMD Top LED, 300 LEDs (60Led/M), Warm White 2800-3000K, 23-25LM/LED, 2 times brightness than SMD5050 LEDsDC12V,16.4 Ft (5 Meter) Roll, Cuttable every 3 LEDs, approx. every 2", at designated cut marks, without damaging the rest stripsWaterproof IP65, prefect for home and business lighting decorationLong life span more than 50,000 hours. 1 Year warrantyLow power consumption, can feed by a 12V/5A (60Watt)
Check price on Amazon

11 Reddit comments about LEDMO SMD5630 LED Strip, 16.4Ft, 300LEDs Warm White 3000K, DC12V Waterproof IP65, 25LM/LED, 2 Times Brightness Than SMD5050 LED Light Strip, LED Strip Light:

u/wobblyparadox · 11 pointsr/SpaceBuckets

Combination of parts from Amazon and ebay. Not all of them are necessary, fittings and Brute trashcans and such are from Home Depot.

u/staggernaut · 4 pointsr/SpaceBuckets

Materials:

Three 5-gallon buckets and one lid (Ace Hardware has white ones for $4, if you don't want orange or blue from HD or Lowe's.) All three cost $12-13.

THESE LEDS from Amazon. $13.59

THIS POWER SUPPLY, the Supernight LED Charger. It is $20.99. You will also need a power cord for it, which I recommend just going to literally ANY thrift store and picking out a nice three-pronged power cord. I'm fairly certain that any three-pronged power cord will work, so if you have one you're not using at home, you can use that.

THIS LED GROW LIGHT, which is 300w and cost $50.99.

TWO of these PC fans. Total cost $10.04.

I bought one of this black duct tape, one of this foil tape (although I recommend buying two, as I ran out with my first roll and had to buy another from the store), and also some double-sided tape, because, if your LED strip is like mine, the adhesive backing is almost nonexistent and the tape becomes necessary.

Oh, and good-quality velcro adhesive patches!

You will also need a power drill and a sturdy box cutter.



I started by taping the entire interior of one bucket with the foil tape, save for the bottom portion where the soil goes. Then I covered the outside with the black tape. Next I drilled holes in the bottom for drainage.

Then I took two of the other buckets and used a ruler's width to mark a cut line right below the lip of each bucket to create spacers. The process of cutting the plastic buckets was definitely the worst part of the process, especially since I didn't have a great cutter, so if you're getting a new one, don't be too cheap. I got this one and it's blade locking function no longer works after this project, so be advised. I lined the spacers with foil tape.

Using the remains of one of the other buckets, I trimmed more of the bucket down so that it's now only the bottom and stands 5" tall. I found some random large screws in my toolbox and drilled them around the circumference, which allows the rest of the bucket to be easily lifted off of the drain pan.

I then drew a circle about 1 cm in from the lip of the lid and cut that out. The light fits perfectly on it. There is lots of light escape at the rim, but it looks pretty cool, so I don't mind it for now.

For the power supply, I cut off the female end of the three-pronged cord I got from Arc Thrift and stripped the wires down a bit. There were three wires inside, green (ground), white (neutral), and black (live), which I then connected to driver. I was certain to unplug during any wire-play and I hope everyone else is, too.

The sidelights were sort of a struggle. I used a scrap of the buckets, like maybe 4-5 inches of bucket from about half-way down to a quarter, so not much. I then lined the inside with the double-sided tape, cutting strips, in an effort to conserve tape, which feels very stable. I drilled a hole and fed the cable through, then determined the best spot to drill a hole on the exterior bucket. It's about at the center of the bucket, or in my case, 13 cm down from the lip. Finally, I fed the LED cable through the exterior hole and the lights were basically in place, where it would sit right above the soil.

I didn't want to have to extend any cords, so I found an ideal spot to place the driver on the exterior so that all cables (LED strip, both fans) could reach their appropriate ports. I fixed the velcro onto the bucket and the driver and tidied the wires with some more duct tape.

Finally, I sealed the edges of both fans, inside and outside, with their respective tapes.


I'm pretty sure that's everything I've done to this point, but if I think of anything else, I'll add it. I'm likely going to black-out the spacers to reduce light leak.

Please let me know if you have any advice, questions, comments!

Thank you /r/SpaceBuckets, for the inspiration and wisdom!

u/ikariusrb · 3 pointsr/woodworking

I went with LED strips to light my garage; I ran one under each of the 4 beams running across my garage, which is ~ 18'x19' in size. I'm really really happy with the result; there's a lot of light, and it's coming from everywhere, which means very few problems with shadows, and there's virtually no risk of breaking a light when moving big pieces of wood around in my garage. These are the strips I used; just need some power supplies to run em, I can dig up the power supplies and splitters I used if you're interested.

https://www.amazon.com/gp/product/B01339F5ZO

u/SpaceBucketFu · 3 pointsr/SpaceBuckets

From the spacebuckets website, materials page

u/EXACTLY25SCHMECKLES · 2 pointsr/SpaceBuckets

I haven't had any problems with the non-waterproof strips. I usually take my plants out of their containers to water, so I haven't worried about them. However, if I were to buy more side lighting I would get more of these warm white 5630 waterproof strips. Their spectrum is a little cooler than the 7020s and they seem somewhat brighter as well.

u/AudioPhoenix · 2 pointsr/SpaceBuckets

LEDMO SMD5630 LED Strip, 16.4Ft, 300LEDs Warm White 3000K, DC12V Waterproof IP65, 25LM/LED, 2 Times Brightness Than SMD5050 LED Light Strip, LED Strip Light https://www.amazon.com/dp/B01339F5ZO/ref=cm_sw_r_cp_apa_i_y2O2Db6X4XRJD

u/Zach925 · 2 pointsr/SpaceBuckets

I'd recommend these https://www.amazon.com/dp/B01339F5ZO?ref=yo_pop_ma_swf

u/mortarmanmike · 2 pointsr/SpaceBuckets

My main lighting is CFL, so I’m a little confused as to what you’re asking. If you’re asking about the LED strips, this is what I got:

LEDMO SMD5630 LED Strip, 16.4Ft, 300LEDs Warm White 3000K, DC12V Waterproof IP65, 25LM/LED, 2 times brightness than SMD5050 LED Light Strip, LED Strip Light https://www.amazon.com/dp/B01339F5ZO/ref=cm_sw_r_cp_api_IxE3AbYR9P2R4

I got both cool and warm white.

u/Bohgeez · 1 pointr/SpaceBuckets

I got these I think the we’re the ones recommended on the space buckets website.

u/SantiagoSentMe · 1 pointr/SpaceBuckets

I put my intakes towards the top of the bucket and my exhaust fan in the lid. It mostly depends on what type of pot you're going to use. If it fills your bucket then you'll want to have them high enough so the air isn't blocked. If there's some space around it then you could go lower but be sure to leave a little space at the bottom if you plan to make a drainage tray. I planned my bucket with a 3 gallon smart pot in mind so i kept the intakes high enough to not be obstructed. There's a link to my first bucket in my profile as Ekropf was kind enough to put it on spacebuckets.com. I haven't taken pics of my 2nd bucket yet, but it's similar. That site has lots of great pictures and info. If you do end up using an intake fan you'll want to mount it somewhere that doesn't blow directly on the top of your pot as it will dry out the top layer of the medium too quickly so the wet/dry cycle will be tough to maintain.
I can't stress the passive intake enough. I was very much of the opinion that I was going to have 1 intake and 1 exhaust fan but some very good people here pointed me in the right direction before I started building. You can see the thread and comments in my profile. (Hoping I can pass along the knowledge I gained. The people on this subreddit are awesome and helped me immensely.) I was very pleasantly surprised by the pvc elbows. They're only about 80 cents each and since I had already ordered 2 fans I made a 2nd bucket. Also, if odor control is important to you then you'll want to maintain negative pressure in your bucket. Intake fans can lead to positive pressure and air leak whereas passive will guarantee negative pressure. Just Google it if you haven't read about it yet.

Regarding the fans; here's what I bought. They're plug and play for a regular outlet.
https://www.amazon.com/gp/product/B009OWRMZ6/ref=ya_st_dp_summary
I also got lamp dimmers for my fans and they work great. Here's a link but I found them for 7 bucks at a local home store similar to Lowes or Home Depot.
http://www.amazon.com/Lutron-TT-300NLH-WH-Credenza-Dimmer-White/dp/B0000DI241

I'd recommend getting a temp/humidity weather monitor and try your bucket with 1 fan first. You can always install a 2nd if needed. It's important to check temp/humidity with your pot and medium in the bucket...I found its much different than an empty bucket. Something like this...
http://www.amazon.com/AcuRite-00611A3-Wireless-Thermometer-Humidity/dp/B001B35APA

I found cheap bricks of coco at Petsmart. It's also used for bedding/substrate in reptile terrariums. Roughly 6 bucks for 8 quarts...add about 30% perlite or vermiculite and you can easily fill a 2-3 gallon pot.
http://m.petsmart.com/h5/hub?id=/reptile/substrate-bedding/exo-terra-coco-husk-tropical-reptile-terrarium-substrate-zid36-5133039/cat-36-catid-500013?null

Here's what I did for led side lighting and power supply. It's not an absolute must, but definitely helpful from what I've read.

http://www.amazon.com/gp/aw/d/B01339F5ZO/ref=mp_s_a_1_3?qid=1457338928&sr=8-3&pi=SY200_QL40&keywords=led+tape+5630&dpPl=1&dpID=512cIyl2inL&ref=plSrch

http://www.amazon.com/gp/aw/d/B01461MOGQ/ref=psdcmw_15704861_t1_B01339F5ZO

If you have any more questions, feel free to pm me. I highly suggest looking through spacebuckets.com though...it'll give you lots of different ideas and you'll be able to see how they work before building your bucket.

Hope this helps!

u/laser_goat · 1 pointr/Multicopter

3s. turnigy 1800 mah lipo. leds are here (but red). they worked fine the other day. so my wiring must have broken