Reddit Reddit reviews Lisle 77080 19 mm Harmonic Balancer Socket for Honda

We found 8 Reddit comments about Lisle 77080 19 mm Harmonic Balancer Socket for Honda. Here are the top ones, ranked by their Reddit score.

Automotive
Replacement Parts
Automotive Replacement Engines & Engine Parts
Automotive Replacement Engine Parts
Automotive Replacement Engine Harmonic Balancers
Lisle 77080 19 mm Harmonic Balancer Socket for Honda
Can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applicationsMade with heat-treated, impact quality alloy steel; Use with 1/2" drive
Check price on Amazon

8 Reddit comments about Lisle 77080 19 mm Harmonic Balancer Socket for Honda:

u/NBQuade · 5 pointsr/Justrolledintotheshop

Wonder how it works? More mass than a standard socket?

https://www.amazon.com/dp/B00RGNCV1U/ref=psdc_553424_t1_B01CVAG1SG

I got one of these for the next time. Wonder if it's the same theory?

u/GotMyOrangeCrush · 5 pointsr/MechanicAdvice

Lisle socket with an impact is the best solution I know of.

https://www.amazon.com/Lisle-77080-Harmonic-Balancer-Socket/dp/B00RGNCV1U/ref=asc_df_B00RGNCV1U/

Years ago I couldn’t get one of these off with 1/2 impact but 3/4 with lots of air spun it right off.


u/mysocialmediaacct · 4 pointsr/MechanicAdvice

Maybe on the impact. I used their 3/4 wrench on mine. My clapped out 1/2 inch pneumatic didn't cut it. Lisle makes a special socket that would probably work with that one.
https://www.amazon.com/dp/B00RGNCV1U/ref=cm_sw_r_cp_apa_i_sNmSCb9RNCJ71

u/snootsmagoots · 2 pointsr/Justrolledintotheshop

the lisle honda socket fits our engines too. same concept as welding more mass on.
https://www.amazon.com/Lisle-77080-Harmonic-Balancer-Socket/dp/B00RGNCV1U

u/iBody · 2 pointsr/MechanicAdvice

This little guy will make your life a lot easier then.

u/Bananapepper89 · 2 pointsr/MechanicAdvice

If you have access to an impact this socket will take the crank pulley bolt right off. I've done about a dozen timing belt jobs with it and it works perfectly every time.

u/strayclown · 2 pointsr/MechanicAdvice

3/4" impact wrenches are $100 at harbor freight. I know a few guys who have one with a 19mm socket just for crank pulleys. But now special sockets exist that let me take Honda crank bolts off with my crusty old IR 1/2" impact gun.

BTW I just linked the first one I found, there are a few different ones and even some DIY sockets.