Reddit reviews LOCK & LOCK HPL933BT Pickle Container
We found 4 Reddit comments about LOCK & LOCK HPL933BT Pickle Container. Here are the top ones, ranked by their Reddit score.
Patented locking system: LOCK & LOCK containers are guaranteed leak-proof (airtight and watertight) with our patented four-hinge locking system and silicone sealing lid. This assures food to stay fresh longer and keeps contents in containers secureBpa free & fad approved: made from boa free material that ensures containers to be safe and . Passed strict hygiene and safety tests of the us fad and German sgsConvenient to use: can be used in the microwave, freezer and dishwasher (top rack only). whether it is storing leftovers or packing lunch, LOCK & LOCK are convenient to use around the kitchen or for any other household needs. Wide variety of unique, stackable designs allows you to save space in your cabinets, refrigerator, and freezerLong-lasting: our containers are made from high quality materials that makes them long-lasting, strong and durable. Cultivate a healthy lifestyle and save space, food and money by investing in some LOCK & LOCK containersONLY LOCK & LOCK PRODUCTS "SOLD BY" or LOCK & LOCK ARE GUARANTEED GENUINE
I usually start the printer before I leave for work in the morning. When I get home I will clean them up, so they sit as long as 6 hours before cleanup on a normal day. I have let them sit for 12+ hours before with no noticeable effect.
The cleaning / support removal process takes maybe 20 minutes including cleanup of the workstation. I cure them for about 20 minutes in a curing chamber as well.
I don't clean my tank unless there are resin bits on the FEP that won't squeegee off. The few times I have cleaned it, I filter the resin through a paint filter back into the bottle, then let ipa rest on the FEP for about 30 seconds, squeegee, and repeat as necessary to break up any hardened resin. Gotta be careful with this, I ruined a FEP trying to pick off dried resin.
Once I have completed cleaning, I wipe down the LCD screen with a clean antistatic cloth that I only use for this purpose, and it (hopefully) never touches resin.
I printed a vat cover on my FDM printer to seal it off when I'm not using it.
For the build plate, I bought some cheap microfiber shop towels from the hardware store, and I cut them up into patches. I put a small amount of IPA on the patch and wipe down the build plate, then toss the patch. I use these for general cleaning of my tools as well.
I posted some costs above:
> I'm estimating this is 3 - 4 liters of resin. Resin is about $40 per liter. Anycubic Photon is for sale on Amazon right now for $270. There are some other expenses associated with a resin printer. Safety equipment (nitrile gloves, safety glasses, apron, ventilation if needed), cleaning supplies (IPA, IPA storage, Ultrasonic Cleaner is optional), and consumable parts for the printer (FEP and LCD screen have to be replaced periodically).
>
>I bought an ultrasonic cleaner because its easier. it was about $60. Also I recommend a ventilation system unless you can put this in a garage that people aren't occupying. Fan, duct, and carbon filter were probably $50 - $60 total.
>
>I wouldn't say its a cheap hobby, but it definitely could be worse.
Some procedural stuff:
I like to remove supports before IPA bath. It seems to give a better finish to any spots the supports make.
I have 3 IPA baths - An older "dirty" IPA bath, a large ziplock bag with IPA, and a newer "clean" bath.
After cutting supports, I dunk the minis in the dirty bath, then toss them in the ziplock bag. I put the ziplock bag in an ultrasonic cleaner filled with water for 5 minutes, as shown in this link https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19690000520.pdf
I then remove the models and do a dunk and a light shake in the clean bath, which is a pickle container with strainer
This all may be over kill but its pretty quick and hasn't failed me yet.
I remove and put the models in the UV chamber for 20 minutes, give or take.
I do all my work on a sheet of wax paper, so when I'm done I can wad up all my waste and toss it.
That is pretty much my process.
Occasionally I will set my sealed IPA containers in the sun so the resin drops out. I am still looking for a good way to filter the dry resin out of the IPA. For now it just settles at the bottom of the container.
There is some work involved to clean them up, but it's really not that much hassle. I bought two of these pickle jars from Amazon and have filled them half way with 99% IPA, once the prints are finished I put on some nitrile gloves, get the prints off the print bed and into the first pickle tub and gently slosh them around in there for about a minute then use the pickle tray to easily get the prints out and into the other IPA pickle tub and give them another minute of rinsing. And then it's just removing the supports and giving them a bit of time in the sun or under a UV led lamp to harden.
This is what you’ll need
GlovePlus Industrial Black Nitrile Gloves - 5 mil, Latex Free, Powder Free, Textured, Disposable, Medium, GPNB44100-BX, Box of 100 https://www.amazon.com/dp/B004BR571K/ref=cm_sw_r_cp_api_i_57QxDbNAPE71D
Scott Shop Towels Original (75147), Blue, 55 Sheets/Standard Roll, 12 Rolls/Case, 660 Towels/Case https://www.amazon.com/dp/B0035BTQ06/ref=cm_sw_r_cp_api_i_S8QxDb2F0YNPW
Mountain Falls 91% Isopropyl Alcohol First Aid Antiseptic for Treatment of Minor Cuts and Scrapes, 32 Fluid Ounce (Pack of 6) https://www.amazon.com/dp/B072PVPR1Z/ref=cm_sw_r_cp_api_i_f9QxDb17T44FY
Or 99%^
LOCK & LOCK HPL933BT Pickle Container https://www.amazon.com/dp/B06WD1F7HD/ref=cm_sw_r_cp_api_i_39QxDb93D2X9H
Or a glass jar to fill with the IPA and rinse the prints in
Do not continue printing with resin until you have all of the materials trust me, you do not want a resin burn
A uv light is not necessary, you can put your prints out in the sun
> My firmware is currently 4.2.12
4.2.17 introduced anti-aliasing.
Here's a link to all the firmwares:
https://github.com/Photonsters/anycubic-photon-docs/tree/master/firmware
And a video showing how to update:
https://www.youtube.com/watch?v=2_kkBO1jmZA
> how do I adjust AA?
The video covers the Chitubox settings here: https://youtu.be/2_kkBO1jmZA?t=197
Also, +1 for the people suggesting a more thorough rinse. If you don't get all the uncured resin off, you'll lose details. I rinse in alcohol using a pickle container, hose the model down with my kitchen faucet sprayer, and then repeat both steps.