Reddit reviews Lutron Caseta Wireless Wallplate Bracket for Pico Remote, PICO-WBX-ADAPT,Translucent
We found 35 Reddit comments about Lutron Caseta Wireless Wallplate Bracket for Pico Remote, PICO-WBX-ADAPT,Translucent. Here are the top ones, ranked by their Reddit score.
Mounts (1) Pico remote to your wall to add a point of control where you need one mostReplaces existing switch to create a 3 Way application for your Caseta Dimmer or SwitchAdd a Pico remote to almost any surface - no cutting holes or pulling wire requiredUse with Lutron Claro WallplatePico remote sold separatelyIncludes (1) Wallplate Bracket; Coordinating accessories sold separately
Yeah this switch and this remote should work together.
Also probably want this mount
I have a similar situation. I'm in a house built in 1955 and in the process of replacing switches with a Lutron setup.
One thing I wanted to be clear on is what you mention about a lack of neutral wires. From my understanding (and granted, I'm not an electrician, but have done my fair share of wiring jobs around the house), even houses from the 50s would have neutral wires. I'm wondering if you've confused ground wires with neutral wires. Neutrals are usually white wires while grounds are usually green or bare copper. Again, I know this as I'm in the exact situation. My house has no ground wires in most locations, but neutrals are everywhere as expected.
I only have one switch in the house the controls an outlet, but here's now I tackled it.
This has actually worked out great, as it means we have an extra outlet in the living room for plugging in things like our laptops, but we still have a switch in the wall for the lamps.
I believe your problem is that you have Smart bulbs connected to a smart switch. If the smart switch is off then the smart bulbs wouldn't work. I would think your bulbs would still connect to wink as long as the power is on. Since they're both dimmable you probably should use the Lutron Casetta On/Off Switch rather than the dimmer.
You may also be able to pair the light with a connected bulb switch that can be wall mounted next to the regular switch using this Lutron Pico Wallplate Bracket and a 2 gang wallplate.
Very, very easy. Heck the lamp modules look like this:
https://www.amazon.com/Caseta-Wireless-Lighting-Dimmer-PD-3PCL-WH/dp/B00KHSXB60/ref=sr_1_2?ie=UTF8&qid=1521211609&sr=8-2&keywords=lutron+lamp
And the wall plate adapters to make the remotes mount to the wall are just plastic plates that you put a normal switch cover on.
https://www.amazon.com/Caseta-Wireless-Wallplate-Bracket-PICO-WBX-ADAPT/dp/B00JZRAFEA/ref=sr_1_10?s=hi&ie=UTF8&qid=1521211653&sr=1-10&keywords=lutron+switch+plate
You don't countersink them, just screw to a flat wall. Its amazingly simple.
I would recommend you buy these to control your hue bulbs from the wall!!
http://www.lutron.com/en-US/Products/Pages/Components/ConnectedBulbRemoteControl/Overview.aspx
I have these controlling my hue bulbs and lutron switches controlling my other dumb bulbs; I love how they have the same design language.
http://www.lutron.com/en-US/Products/Pages/Components/PicoWirelessController/Overview.aspx
https://www.amazon.com/Lutron-PICO-WBX-ADAPT-Pico-Wallplate-Bracket/dp/B00JZRAFEA
I'm seriously in love with the setup; the remote's battery is supposed to last 5 years. I just put the bracket over top of where the switch box used to be.
Here's a video on how to pair the luton remote with hue bulb(s). Really simple actually once you do it once or twice.
https://www.youtube.com/watch?v=Bpeq31kWqyU&feature=youtu.be
If you're thinking of getting some Sonos equipment. I have some of these too:
https://www.amazon.com/Lutron-PJ2-3BRL-GWH-A02-Control-Endorsed-Integration/dp/B01LC7O9MY
If you are interested in Lutron, you can just get a Lutron plug-in dimmer with a pico remote:
https://www.amazon.com/dp/B015SXZLK2/
Hardwire the switch open and mount the pico where the switch is with the wall plate bracket and you are good to go:
https://www.amazon.com/dp/B00JZRAFEA/
If you decide to get more in-depth with home automation, there are also ways to program the different pico buttons to do other things (run scenes, etc)
Confirmed. The switch is wired to the load and the remote is wall mounted acting as your second switch. I have this arrangement in both the kitchen and the living room and it works wonderfully.
Switch
Wall Plate
If you want your switch to have a more "finished" appearance, get a pico wallplate bracket, a claro wall plate, and then a caseta lamp module.
Depending on how your current lightswitch is configured, you may be able to use a two gang wallplate on your current switch and the new switch.
Use a Caseta switch and put Pico remotes at the other location(s). The difference between the normal Caseta dimmer and the dimmer+remote is only $5. Edit: And another $6 for the wall plate bracket, forgot the set doesn't come with one. Edit 2: If you don't need dimming functionality, Nicksatx is right that you can even keep the mechanical switch. You'll probably have to buy the non-dimming on/off switch online because I've never seen one in a store.
You'll need three of the Pico Wallplate Bracket, and a 3-gang wall plate. It will be flush.
This. The backplates you need to do this are the Pico Wall Plate Brackets. I have em all over since they can fit right in to your home naturally and it makes the Hue system intuitive for guests.
I have the same issue so i went with the following:
1 x Lutron Connected Bulb remote
1 x Cree Connected Light bulb
1 x Lutron PICO-WBX-ADAPT Pico Wallplate Bracket
1 x Lutron Claro Wall Plate
I leave the light permanently "on", and removed the chain. The bulb is controlled by the remote, which i then put on the wall outside the storage closet so it looks just like a normal light switch for the room.
All up, about $50, no wiring needed, looks like it is meant to be there, and best thing, if you end up expanding your Home Automation with a hub, the remote talks to Wink (although Wink are having trouble with the cree connected bulb lately. The remote also works with GE link bulbs, but you need a Wink hub for that to work.
Correct, except you don't even need the blank switch plate. The remote adapter is designed to fit in existing gang plates.
Here's the remote:
https://www.amazon.com/Lutron-LZL-4B-WH-L01-Connected-Bulb-Remote/dp/B014STZASK/
and here's the gang plate adapter:
https://www.amazon.com/Lutron-PICO-WBX-ADAPT-Pico-Wallplate-Bracket/dp/B00JZRAFEA
Can likely use same wall plate for Lutron Caseta
For Pico remotes you need to get a wall bracket to install in gang box (can use same wall plate)
https://www.amazon.com/Caseta-Wireless-Wallplate-Bracket-PICO-WBX-ADAPT/dp/B00JZRAFEA
The Caseta switch will not control dimming of smart bulbs. It will only control dimming of normal bulbs screwed into lights it switches. Another option is the lamp dimmer which plugs into an outlet and then you plug the lamp into it. Again it will only control a normal bulb. If you’re smart bulbs are zigbee. Lutron makes a wireless pico remote called the connected bulb remote that can be mounted to the wall. That may work for you
Remote:
Lutron LZL-4B-WH-L01 Connected Bulb Remote https://www.amazon.com/dp/B014STZASK/ref=cm_sw_r_cp_api_9uobAb02YR3KA
Wall bracket:
Lutron PICO-WBX-ADAPT Pico Wallplate Bracket https://www.amazon.com/dp/B00JZRAFEA/ref=cm_sw_r_cp_api_5vobAbMH0D9B0
Edited with link
You don't even need a hub to make that work. Here is the kit you need:
https://www.amazon.com/dp/B00JJY0S4G/
You'll also want the wall adapter for the remote.
https://www.amazon.com/dp/B00JZRAFEA/
The remotes have a 10 year battery life and the battery is easy to change.
So I wanted to report back for people who come across this thread. Based on Manbient's recommendation, I am using Lutron Connected Remotes in conjunction with the Phillips Hue Bulbs and it works great. "Pairing" the Remote to the Hue hub first and then to each bulb you want it to control worked flawlessly. I tested a network outtage and the lutron remote still controls the lights just fine. The Hue remote DOES NOT, as it reports back to the hub to control the lights. While the hue remote has more options for colors, etc, the Lutron remotes seem to be a little more failproof, and can be mounted on the wall in standard faceplates. In fact, I think you can use the Pico wallplate bracket to give it the built-in look. Here is a link to that product: https://www.amazon.com/gp/product/B00JZRAFEA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This seems like the best solution for now, and it is still completely customizeable/reworkable, unlike wired switches or other combos.
The only thing that I don't like about the Lutron Connected remotes is that a single tap of the "on" button doesn't bring them back to their previously dimmed level, it turns them on full blast. Of course, you can just use the dim up and down buttons, but I got used to Lutron's Maestro switches where a single tap would bring the lights up to the previous level and a double tap would bring them on full. I did a little searching and couldn't find whether this was possible with the connected remote.
Anyone have a solution or workaround for that?
Thanks again everyone!
Edit: grammar
I know this isn't exactly the response you were looking for but there are decora style hue switches. Technically they are remotes but you can hardwire your lights to always be on and install the remotes as decora switches. My current system consists of 27 hue bulbs controlled by 12 of these remotes/switches and it works great. Links and documentation below.
Remotes
Wallplate Brackets
Documentation:
The way I would do it is, change the plug that's on a switch to a plug that's on all the time and use a couple of these, http://www.amazon.com/gp/aw/d/B00JJY1QG0/ref=mp_s_a_1_3?qid=1411994996&sr=8-3&pi=SL75. Then I would replace the switch with http://www.amazon.com/gp/aw/d/B00KLAXOE8/ref=mp_s_a_1_6?qid=1411995035&sr=8-6&pi=SL75 and http://www.amazon.com/gp/aw/d/B00JZRAFEA/ref=mp_s_a_1_3?qid=1411995035&sr=8-3&pi=SL75. Its super easy to do this way and everything is connected without trying to fish new wires in.
I'm not sure if this is what you're looking for, but the other day I asked a similar question.
I wanted my Hues to be powered all the time so I could always use the Hue app alone to turn them on, or have them return to the previous scene, or all the other benefits that come with leaving the Hues powered.
However, I wanted to replace the Decora switches/dimmers with something that could be used to control the Hues but without cutting power. So my solution is what /u/rittyroo suggested, I purchased a Lutron Connected Bulb Remote with the wallplate bracket and hooked it up to the Hues. It's not designed for them, but there is a Youtube video showing how to set it up and it worked for me no problem.
I still have to actually hardwire the lights to always-on, though I haven't yet because they're three-way switches which are outside of my expertise - I'll be getting an electrician or someone smarter than me to do it. But the system works exactly like I had hoped.
these are used for junction box and flat surface install. Pretty simple. I even have one on my headboard ;)
I was wondering if someone was going to mention this. The connected bulb remotes pair directly with the hue bulbs via the Zigbee Lightlink protocol (pairing info here) and have instantaneous response to both dim and switch the lights. They can be paired with one or many bulbs. When matched with the pico bracket, they can be installed in the place of the regular switch, just remove the old switch and wirenut the hot to the switch leg so that way the bulb sockets are always "on". They are the exact size of a decora switch and therefore cheap switch covers can be used with them. I have them all over my house.
Just as another alternative (don't know your usage case specifically) but you could hard wire the switch and install a lutron connected bulb remote in the gang box instead. Then you've got a guest friendly alternative that doesn't kill power to the bulb.
Connected Bulb Remote
Wall Plate Bracket
Maybe it's not what you're looking for though.
Lutron Caseta. They even have a mount bracket where you don't have to cut the wall to add the second switch.
You would need a switch kit and a mounting bracket.
https://www.amazon.com/P-PKG1W-WH-Wireless-600-watt-150-watt-Multi-Location/dp/B00JJY0S4G
https://www.amazon.com/Lutron-PICO-WBX-ADAPT-Pico-Wallplate-Bracket/dp/B00JZRAFEA
My recommendation would be to have a normal switch in A and disconnect all the other switches and wires(you can probably just leave them cold in the wall) and then use pico remotes in the other two locations. They're great because they can screw in right into a standard cover plate. And be placed anywhere since they're battery operated. Sadly they only work with other lutron switches even through a third party hub like a wink hub so you'd have to replace your leviton switch with a lutron one.
Also the dimmable Lutrons don't require a neutral as they basically keep the circuit open just a tiny bit so the can stay powered(think powerdraw of like miliamps) but not enough for the bulbs to turn on.
Switch: https://www.amazon.com/dp/B00KLAXFQA/
Pico + bracket x 2:
https://www.amazon.com/dp/B00KLAXFQ0/
https://www.amazon.com/Caseta-Wireless-Wallplate-Bracket-PICO-WBX-ADAPT/dp/B00JZRAFEA/
You can buy them separately if you already have existing ecosystem or you can get this kit:
https://www.amazon.com/dp/B01M3XJUAD
Almost! The lutron stuff is a bit confusing. They have their pico/caseta line (which you don't want), and their connected bulb line.
You want this, this, and this. Of course, you'll also need Zigbee bulbs (Osram Lightify, GE Link, etc) and a compatible hub, such as Wink. If you'd like, you can get a second remote and keep it beside your bed.
Hope this helps!
Yup. Otherwise just abandon the mechanical switch and drop a Caseta remote in. Nice thing about the remote is auto 50% (if you want it) and you can program it to turn on extra accessories (hall light or...?) as well.
They look just like switches - you just need one of these Lutron PICO-WBX-ADAPT Pico Wallplate Bracket https://www.amazon.com/dp/B00JZRAFEA/ref=cm_sw_r_cp_api_FXL6ybQQGHE8S.
I use this one for two of the lights in my house:
Lutron LZL-4B-WH-L01 Connected Bulb Remote https://www.amazon.com/dp/B014STZASK/ref=cm_sw_r_cp_api_Fepyzb0C7TV95
Get this accessory and it fits in your standard light switch.
Lutron PICO-WBX-ADAPT Pico Wallplate Bracket https://www.amazon.com/dp/B00JZRAFEA/ref=cm_sw_r_cp_api_CfpyzbTEYY4F5
Is there a reason why you're going the bulb route instead of the smart switches? Depending on how many bulbs you get, the cost can get up there pretty quickly. I use Lutron Caseta switches and they integrate well to smartthings and then into google home. I also have 4 downlights with hue bulbs in them for one room. What I did was just wired the power wires behind the switch to always have power to the fixture. At the time, Lutron sold a remote that looked the the other smart switches I installed that could control hue light bulbs. I just put it over the wires with a bracket that Lutron made as well.
In my setup (Inspire LED) I use to pull power from a standard outlet (behind Fridge or microwave). This was run to an RF Receiver that let me control the lights via wireless RF Controls, like this one. This setup worked.. okay.. the receiver and transmitter I used weren't the best.
I have since re-configured to use a Smart Outlet, connected to my Wink and controlled with Alexa. I have also setup a Lutron Bulb Remote that has shortcuts that allow me to operate the lights. This is mounted, next to a single gang box, and covered with a double gang plate, you cannot tell the difference.. no drywall is cut or removed. Lutron makes a wall-mount kit for their remotes.
Not a single wire is run in these setups. You can mount the remote anywhere you please. You could even add a simple in-line toggle switch to turn them on / off... and mount under the cabinets.. no dimming tho.. endless options.
This will work fitted into this
And works with standalone zigbee bulbs, a hue hub, or smartthings.
Yes...still, the connected bulb remote is the right option. Lutron even makes a wall bracket for it and it fits inside a standard decora wall plate. I do this with a Caseta switch + pico remote in a 3 way setup. First switch has the Caseta switch installed like a normal switch. 2nd switch has the line, load, and traveler connected with a wire nut + the wall mount + the pico remote. You would never know it wasn’t a “real” switch.
wall bracket
Edit to clarify: you want the Lutron connected bulb remote, NOT the pico remote, but they have the same form factor and both fit in that bracket.
You'll want to get the Connected Bulb Remote to run the setup I described. I don't think the other models work the same. If mounting in a wall plate, you'll also need the bracket.
The Lutron Connected Bulb remote can control bulbs directly and has a wall plate bracket. It doesn't wire in unfortunately.
You can use the Lutron Caseta for 3 way switches or more. Install the full Lutron Caseta switch in one box, and use remotes for the other boxes. You can put another switch anywhere, even if there isn't wiring there.
Lutron Caseta Wireless In-Wall Dimmer, 600/150-Watt, Single Pole, Works with Amazon Alexa https://www.amazon.com/dp/B00KLAXFQA/ref=cm_sw_r_cp_apa_BazDyb4YRKZ8B
Remote with wall bracket
Lutron PJ2-WALL-WH-L01 Pico Remote Control with Wall Mounting Kit, White https://www.amazon.com/dp/B00JR202JQ/ref=cm_sw_r_cp_apa_ObzDybQ8C594T
You need the hub as well
Hub, 1 switch, and 1 remote
Lutron P-BDG-PKG1W Caseta Wireless Dimmer Kit with Smart Bridge for Amazon Alexa and Selected Models, White https://www.amazon.com/dp/B00MXCRAX8/ref=cm_sw_r_cp_apa_kdzDybXVZ4ZGM
They sell the wall brackets seperate as well
Lutron PICO-WBX-ADAPT Pico Wallplate Bracket https://www.amazon.com/dp/B00JZRAFEA/ref=cm_sw_r_cp_apa_nfzDybQX74B01
Basically you can get a 2way solution for $100, and add a 3rd switch for $20