Reddit reviews M-Wave Seat Post Clamp with Rack Mounts, 31.8mm, Black
We found 9 Reddit comments about M-Wave Seat Post Clamp with Rack Mounts, 31.8mm, Black. Here are the top ones, ranked by their Reddit score.
Allows for another fixation point for your rear rackAll the functionality of an M-Wave seat tube clampBlack in color to make it blend in nicely with your bikeEyelets for rear rack, Allen screws includedWeighs less than 35 gramsAlloy seat clamp with threads for luggage carrier fixation37g
It has no top eyelets, so you'll need this:
https://www.amazon.com/gp/product/B001V537I0/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1
You also have the option of using a seat post clamp with eyelets, for example;
M-Wave Seat Post Clamp with Rack Mounts, 31.8mm, Black https://www.amazon.com/dp/B001V537I0/ref=cm_sw_r_cp_apa_i_iahxDbZMT1YBS
Unless your frame has an integrated clamp, of course.
To make this fit on your bike, you’re gonna need a few different parts.
First something to fix the rack towards where the seatstay eyelets would be. Something like this;
seatstay rack adapter
Then something to set the rack where the dropouts eyelets would be;
dropout rack adapter
This will work but it is defenitly not the most optimal setting since you bike is not built to carry a pannier rack.
I have that OMM Phat Sherpa and recommend it. They will email you to measure the length/thread pitch of the axle and get the make/model when you order to make sure it is the right one.
I would also get a seat post clamp that has rack mounts like this. Looks much nicer than the hose clamps.
I didn't like these. There were soo many screws/nuts on the frame, and some of the screws interfered with the chain. I could have re-positioned the legs but decided I didn't like the rack in general. I got a seat post clamp mount and It works with my existing rack. https://www.amazon.com/M-Wave-Clamp-Mounts-31-8mm-Black/dp/B001V537I0/ref=sr_1_4?dchild=1&keywords=bike+rack+seatpost+clamp&qid=1572287087&sr=8-4 Make sure it fits the outer frame that holds the seat post.
I have a Blackburn EX-1 on one bike so I can use the Blackburn bicycle seat:
https://www.amazon.com/gp/product/B005ZIQMCC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I have a Topeak SuperTourist on my commuter, it's heavy but I like being able to fit my Topeak top bag with a couple of panniers when needed. I think the BadBoy 2 has mount points just above the axle.
https://www.amazon.com/gp/product/B000ZKHN6Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I used a little clamp thing to attach the two front straps to the seatpost, worked fine. They don't really hold any weight, just stability. Something like this or this.
Or these if you would rather mount to your seatstays.
Depends which Axiom DLX. The Road DLX is not compatible as it's meant for rim brakes (I own a carbon Diverge and also have the Road DLX on another bike). It's a really nice rack.
If your Diverge E5 is newer (2018 and newer if I remember correctly), you won't have upper screw holes for the rack so you'll just need to get a seat clamp with them. These work great: https://www.amazon.com/M-Wave-Seatpost-Clamp-Rack-Mounts/dp/B001V537I0/ref=sr_1_4?keywords=m-wave+seatpost+clamp&qid=1550795738&s=gateway&sr=8-4
​
u/jnav1200 https://www.reddit.com/r/bikecommuting/comments/asxs3d/choosing_a_bike_rack/egzk9of has a very interesting solution though that might be worth a shot, but the Road DLX probably isn't wide enough at the base either for that.
don't get the seatpost rack, not nearly strong enough. Try this instead