Reddit Reddit reviews Maestro ADS-MRR Universal Radio Replacement and Steering Wheel Interface

We found 12 Reddit comments about Maestro ADS-MRR Universal Radio Replacement and Steering Wheel Interface. Here are the top ones, ranked by their Reddit score.

Automotive
Replacement Parts
Automotive Replacement Lighting & Electrical Equipment
Automotive Replacement Electrical Equipment
Automotive Replacement Radio Electrical Accessories
Maestro ADS-MRR Universal Radio Replacement and Steering Wheel Interface
Allows installation of a new car stereo in select 2006-up Chrysler, Fiat, Ford, GM, Honda, Subaru, Toyota, and VW vehiclesRetains factory convenience features (OnStar, SYNC, Uconnect, and more) with select Kenwood, Alpine, Pioneer, and JVC touchscreen receiversDisplays engine performance data on touchscreen with select Kenwood, JVC, Pioneer, and Alpine multimedia receivers
Check price on Amazon

12 Reddit comments about Maestro ADS-MRR Universal Radio Replacement and Steering Wheel Interface:

u/fidelityflip · 7 pointsr/FJCruiser

I have two FJs, both with upgraded audio. The Kenwood Excelon DNX695S is my favorite head unit of the two, the other is a Kenwood Excelon DNX892. The DNX659S is quite a bit cheaper, has a great layout, no mechanical door hiding the CD/DVD player, and still has the OBDII connection to monitor engine stuff, which is cool. also two inputs for front and rear cameras.

Keep in mind you will need a few additional components to fully integrate, they aren't 100% needed, but make it better: Maestro ADS-MRR to use your steering wheel controls, SiriusXM SXV300v1 if you want Satellite Radio, and a plastic trim piece to complete the bezel around the new radio.

I have a Wicked CAS Stage 2 speaker and subwoofer system in one, and stock speakers in the other. Both sound great with the new head units, but the Wicked system with the dual subwoofers is really nice. I don't have a sub in the second FJ, and miss it after driving the first.

https://smile.amazon.com/gp/product/B07F946YVX/ref=ox_sc_saved_title_1?smid=A32QR6D7S73KI&psc=1

https://smile.amazon.com/gp/product/B00NJTO4CY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

https://smile.amazon.com/Maestro-ADS-MRR-Universal-Replacement-Interface/dp/B00E4W1644/ref=pd_bxgy_504_img_2/134-9197268-1169858?_encoding=UTF8&pd_rd_i=B00E4W1644&pd_rd_r=9886b991-360d-4091-80c8-1d4c8857e87e&pd_rd_w=eHBMr&pd_rd_wg=XXeXa&pf_rd_p=a2006322-0bc0-4db9-a08e-d168c18ce6f0&pf_rd_r=8JEA44SVJBBDNT7YZM62&psc=1&refRID=8JEA44SVJBBDNT7YZM62

https://smile.amazon.com/gp/product/B000K52CY2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

https://shop.wickedcas.com/fj-cruiser-stage2-package-audio-upgrade-stereo-stage-2.html?category_id=3

u/budjb · 4 pointsr/CarAV
u/MrChamGR · 4 pointsr/Fiat

I would suggest following the linked guide with a few changes / notes below : https://www.fiat500owners.com/threads/how-to-2012-fiat-500-double-din-radio-install.7412/

  1. The double din dash adapter seems a bit iffy from the Amazon reviews, YMMV: https://www.amazon.com/Scosche-FT4276B-Double-Select-Vehicles/dp/B00RL9L9F8/ref=sr_1_1?keywords=FT4276B&qid=1573525758&sr=8-1
  2. Antenna Adapter on Amazon for ~10 bucks: https://www.amazon.com/gp/product/B07DWLTP6R/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
  3. For the headunit I'm assuming you'd want bluetooth and Android Auto / Apple Carplay? I would highly suggest the Kenwood DMX706S : https://www.amazon.com/gp/product/B07SMBMQ5Z/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
  4. To use the head unit after install without actually splicing your parking brake and other cables, get the Kenwood bypass cable: https://www.amazon.com/gp/product/B01FY8P9QC/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
  5. To tie all this together, you'll need the wiring harness. I suggest idatamaestro:https://www.amazon.com/gp/product/B00E4W1644/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
    https://www.amazon.com/gp/product/B012F8RC1Y/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
    You will make an account and flash the firmware to the appropriate car make/year and head unit model.

    I've only installed a basic 1 DIN stereo on my old 2013 500. I suggested the above head unit and wiring harness because I've installed that on my 2017 500 and had great results. Best of luck.
u/spinnyd · 3 pointsr/Toyota

I’m looking at adding a Kenwood radio to my Tundra and I found this.

Maestro ADS-MRR Universal Radio Replacement and Steering Wheel Interface https://www.amazon.com/dp/B00E4W1644/ref=cm_sw_r_cp_api_NeB9BbZG14HP6

This will allow the radio to show TPMS data and reset CEL codes and a whole lot more. Aftermarket is always ahead of OEM.

u/Robot_Ross · 1 pointr/AndroidAuto

You can also get this: Amazon

This allows you to hook the steering wheel controls up, as well as allowing deeper integration to the car from the head unit through the CAN bus. I know a lot of the Kenwood Android Auto units have really good integration with this stuff.

u/95688it · 1 pointr/subaruimpreza

it's complicated, i did it when i first bought my 16'.

and don't let just any audio installer do it, they'll just hack the shit out of the harness.

you need about $200 in parts besides the headunit to do it properly

shit and it looks like the link to the blog on how to do it is gone :(

http://roflitsowens.blogspot.com/2015/12/2016-subaru-wrx-replacing-starlink-head.html

basically you need:

dash install kit

wire to keep OEM backup camera

30pin adapter you'll cut it in half and use it for hooking all these various things together

Maestro to retain steering wheel control, there's a cheaper version though with less features

adapter to retain USB

adapter for stock antenna

adapter for radio so you don't have to cut anything


and i'm pretty sure i'm forgetting something else.

most of these things all have to be wired into the 30 pin connector, it was much easier to figure it all out on my workbench and solder it properly then install everything, took me about 2 days to do.

u/rubin110 · 1 pointr/AndroidAuto

This might be an elaborate way of answering your first question, but mostly I wanted to write out my experience of doing this exact thing. Also apparently I need to split this up into 2 replies.

​

I have an AVH-W4400NEX and a 2012 Prius Plug-In. After buying all the stuff I needed...

u/EGHeart · 1 pointr/Mustang

Remember 10?-14 radios are for the most part identical. With almost any new vehicle the temp controls are mixed in with the stereo.

Your going to need everything you would normally need for a stereo install. Wire harness, Antenna adaptor, ect.

If you have sync and want to continue to use the wheel controls, ect you will need this.

iDatalink Maestro ADS-MRR Factory Integration Adapter by iDatalink Maestro http://www.amazon.com/dp/B00E4W1644/ref=cm_sw_r_udp_awd_n4J-tb0474KE1

Lastly you would need the dash kit. There are many to pick from.

Metra 99-5826CH Ford Mustang 2010-Up DIN/DDIN Dash Installation Kit by Metra http://www.amazon.com/dp/B008E9HIPO/ref=cm_sw_r_udp_awd_I2J-tb1PSPNRZ

Scosche FD1441B 2010 Ford Mustang Double DIN and DIN with Pocket by Scosche http://www.amazon.com/dp/B00664KRCU/ref=cm_sw_r_udp_awd_k3J-tb16NT8BY

ADS MUS1 Radio Installation Kit for 2010-2014 Ford Mustang ADS-KIT-MUS1 by ADS Tech http://www.amazon.com/dp/B00FEIDS1Q/ref=cm_sw_r_udp_awd_04J-tb1XSYPE7

Metra 99-5823CH Dash Kit for Ford Mustang 2010 Excluding Navigation Equipped Models -Black by Metra http://www.amazon.com/dp/B0040QE8G2/ref=cm_sw_r_udp_awd_n5J-tb1BW2604


u/bsmitty358 · 1 pointr/FocusST

You may want to look into this converter and do some research.

u/Adame409 · 1 pointr/Mustang

For the head unit I used a Pioneer 4200nex (this head unit is pretty much the same as the 8200nex(which is the top of the line head unit) but without the navigation. There really isn't a need for that feature since this head unit supports Android Auto and Apple Car Play, they both use their own maps)

For the dash kit I used the ADS MUS1 Radio Installation Kit (if you decide to go with this kit, the wire harness is already included inside the box)

Then I used the iDatalink Maestro ADS-MRR module so they would all communicate with each other, that also took care of the A/C, steering wheel controls and will also connect to the ODB2.

I did not install this myself, but the installer told me that it wasn't too difficult, and it was his first time installing this kit/radio into a mustang.

I love it!!! It was worth the all the money I spent!

edit: if you have anymore questions, feel free to ask :)

u/Bassblaster505 · 1 pointr/carmodification

EASY! you can do the install yourself ALL those Chrysler RES NON boston radios are nothing special. i done a FULL system in my 2012 200 (dual amps, new speakers, head unit and subwoofer). Right so head over to amazon or crutchfeild.

for a new radio you'll need a idatalink RR module and CH-1 plug and play harness to retain your steering wheel buttons.

for your dash kit to fit a new radio you have 2 options. SINGLE DIN: Best Kits BKCDK644 DOUBLE DIN: Best Kits BKCDK642 Since you want a touch screen you need the double din kit

SPEAKERS: Doors and rear deck are 6x9s and dash are 3.5's. for the doors NO ADAPTERS ARE NEEDED and MOST 3.5's for the dash wont need mounting adapters either. But check on crutchfied for fit as the real nice chunky woofers dont fit. But Rockford Fosgate PUNCH, Infinity reference, Kenwood Excelon and Focal Integration will drop right in if you just cut the plastic "cup" the original speakers sit in.

​

you do have to pop the door panels off to get to the speakers and the dash speakers you have to take the A-pillar trim pieces off. rear deck the rear seat needs folded down and more C-pillar plastic trim popped off. theres better guides online then i can describe on a text post.

​

the best buy free installation probably doesnt include the smart harness required to swap out the factory radio