Reddit Reddit reviews Materials Science and Engineering: An Introduction, 8th Edition

We found 14 Reddit comments about Materials Science and Engineering: An Introduction, 8th Edition. Here are the top ones, ranked by their Reddit score.

Books
Engineering & Transportation
Engineering
Chemical Engineering
Materials Science and Engineering: An Introduction, 8th Edition
Check price on Amazon

14 Reddit comments about Materials Science and Engineering: An Introduction, 8th Edition:

u/jrm119 · 85 pointsr/explainlikeimfive

Material science and textiles, while extremely related are quite different in the classroom. I had MSE classes and my intro textbook was the one below. It mainly dealt with materials on a molecular level, while the textile courses consisted of the processes involved with creating the fabrics.

https://www.amazon.com/Materials-Science-Engineering-Introduction-8th/dp/0470419970

u/BMKR · 13 pointsr/materials

The obvious choice is the introductory holy bible of MSE. If you already know the basics of how materials are categorized and behave, that book /u/Tartarus116 posted looks pretty good.

u/norsoulnet · 9 pointsr/askscience

Coming from a GeoSci background, you may have already used Callister, but if not, it is my most highly recommended textbook. Of all the textbooks. It is simply amazing. If you are beyond that already, the deeper book I would recommend is Meyers and Chawla which is also an amazing book, but much more difficult to get a handle on. Meyers and Chawla is what I learned from at the graduate level in Materials Engineering, and indeed it is quite heavy on the details and equations. That being said, when responding to almost all questions with regards to materials, the first place I look is Callister. The last time I used Meyers and Chawla was looking into the specific mechanisms and modeling methods for creep. If you get and understand M&C you will probably know more theory than anybody else at your knew job.

u/BAHHROO · 8 pointsr/metallurgy

Here’s a pdf of Fundamentals of Metallurgy by Sheshardi Seetharamen. Helped me a lot while I was in school, especially for chemistry.

The go to book for metallurgy / engineering (and the most recommended here) is Materials Science and Engineering: An Introduction by Callister

u/CuppaJoe12 · 4 pointsr/metallurgy

The concepts of nucleation and growth are covered in most introductory materials science textbooks. Callister covers this topic at an introductory level in chapter 10 of his book.

If you want to delve deeper, you should look for books on solid-solid or liquid-solid phase transformations and/or kinetics. I can give recommendations if you are interested.

Hardenability is also an important concept to understand for anyone working in the steel industry or designing things made out of steel. I would expect most companies in this field to have some sort of on the job training, or at least the contact info for someone at their heat treatment supplier who knows what they are talking about.

u/danny31292 · 3 pointsr/materials

http://www.amazon.com/Materials-Science-Engineering-An-Introduction/dp/0470419970

If you pm me I can give you a pdf copy of the older version.

u/Vorian-Atreides · 2 pointsr/CognitiveSurplus

Maybe you could use a basic crystal structure like the one pictured on the cover of Callister? (https://www.amazon.com/Materials-Science-Engineering-Introduction-8th/dp/0470419970) Its the most often used Intro MSE course textbook.

u/ohNole · 2 pointsr/engineering

Stuff Matters is a easy read without all of the calculations, so it's a really go way to learn theory without getting bogged down with math - it's also on Bill Gates book list. Also, this is the only textbook I've ever read cover to cover - my professor was a nut, but we learned a shitload. Good luck, OP!

u/tchufnagel · 2 pointsr/AskEngineers

There are a variety of introductory materials science books. The one by Callister is probably the most widely used, at least in the U.S., but personally I prefer Ashby and Jones.

The University of Cambridge also has a nice set of tutorials online, here.

u/bloody_yanks · 2 pointsr/metallurgy

A physics degree is more than adequate for this kind of work. Your day to day would likely consist of properties testing (mechanical properties like tensile strength and hardness most likely, but also perhaps corrosion, chemistry, creep, etc, depending on industry), microstructural analysis, and failure analysis. With a degree in physics you should be able to pick up an undergrad material science text like Callister and fill in the more applied science gaps in your education.

u/BennyZee · 1 pointr/EngineeringStudents

If you can, pick up a copy/PDF of Introduction to Materials http://www.amazon.com/gp/aw/d/0470419970/ref=mp_s_a_1_6?qid=1404346873&sr=1-6&pi=AC_SX110_SY165_QL70 Extremely useful book for all things material science.

u/people40 · 1 pointr/EngineeringStudents

I agree about Felder and Rousseau for Mass and material balances. It is probably the only textbook that I actually reference (mostly for the charts in the back and the unit conversions on the front cover).

I also like Callister for general materials science information.

Perry's is a wonderful reference.

u/SlipShift · 1 pointr/EngineeringStudents

Materials science and engineering student here. If it's an intro to materials science type course, mwalsh2010 has covered most of it. Additionally, expect to index planes and directions in crystal structures, solid solubility, mechanical properties testing methods, phase percentage and lever rule calculations (under phase diagrams), phase transformation reactions (eutectic, eutectoid, paratectic, etc.), and various processing methods. You'll probably mainly study metals and ceramics since they're generally not as complex as polymeric and electronic materials.

This was the text book used in an intro course I took. I'm sure there's a torrent of it out there and should serve as a pretty solid resource.

Basic mechanical properties of materials.

If you would like more resources, feel free to PM me.