Reddit reviews Metra 40-LX11 Antenna Adaptor Cable - Select 2009-Up Lexus/Toyota
We found 8 Reddit comments about Metra 40-LX11 Antenna Adaptor Cable - Select 2009-Up Lexus/Toyota. Here are the top ones, ranked by their Reddit score.
Lexus Antenna Adapt Cable 2009-UpWiring HarnessEasy installation
I have done this on a 2017, which uses the same system and can be swapped out in the same fashion. There are a few caveats that may sway your decision however.
I used the iDatalink Maestro RR with the TO2 harness that allowed a very straight-forward installation with no modification to the factory wiring. This is not where this story ends, however.
The Maestro and harness kits do not come with the adapters required for factory USB, Aux (sort of), AM/FM radio, GPS, Satellite Radio, or any integration for the factory microphone. This last part is what has pained me the most in this whole thing, as I've yet to install the aftermarket microphone or make the attempts necessary to try to get the factory one working. I've got lots of wiring diagrams, but no free time.
I used this Axxess adapter for the factory USB. Fits perfectly, just plug into the radio and the factory connector. Wrap the radio USB end with TESA tape so it doesn't disconnect.
The antenna adapters for GPS and Satellite Radio are available from iDatalink as the ACC-SAT-TO2 kit. They should connect directly to the factory harnesses and then to the new radio, but if they don't work for you this is not required to be a specific iDatalink replacement so you may be able to find another brand that works.
I think I ordered the Metra 40-LX11 for the AM/FM radio antenna but I have yet to actually install it so I'm not 100% positive this will work. It says for select 08 and newer Toyota/Lexus vehicles and most Toyotas are fairly similar when it comes to these connectors. Especially given that the Entune radio available in the Corolla is the model used in other non-Corollas I'd imagine it's more likely to be compatible.
For auxiliary input, you do get the aux connection as RCAs, but you may need to invest in a female RCA to male 3.5mm adapter. Don't bother with the one that has red white AND yellow because it's only wired for red and white (audio). Something like this should work fine.
Oh and for actually installing the radio, just get this dash kit. Don't make my mistake and get the cheaper Metra one, it's not worth it.
I hope this is probably more than enough information to get you on the right track. Feel free to PM me if you have questions!
And then obviously pick a head unit. We've had good luck with the Kenwood DNX695S, which has navigation, wired android auto, apple car play, and plays DVDs. It looks like a lot of parts but the only wire connecting you'll need to do is with the various harnesses listed above, and there's good documentation on what goes where. Once you get your harness all connected up, everything just plugs right into your existing Toyota harnesses.
There are 3 different connectors that you'll have to hook up to the connector that comes with the head unit that plugs into the head unit itself. The other 3 connectors are VERY easy to install. 0 electrical engineering education, but common sense and the color coded instructions on the back of the packaging explains all you need to know.
Radio Antenna harness
Main connection (two main connectors that came out of the factory head unit)
USB Connector (if your car came with usb at the bottom right of the center console)
Should mention that the stock AUX connection won't function. You will have to run an extension from the back of the head unit to somewhere in your car. I routed mine to the left side of the passenger seat held up by this thing.
I don't use the microphone for bluetooth so that's not connected. I don't plan on using my head unit for displaying for any video sources so I didn't bother hooking up the hand brake bypass. The GPS antenna I just stuck to some metal plate that was inside the head unit cavity (pretty strong magnet and pretty accurate).
You may want to pick up a bracket like this. to fill in the rest of the head unit cavity along the sides. I'm not too sure if this is the exact one for the head unit. Crutchfield automatically told me what parts I would need to completely setup the head unit including the bracket and connectors. I couldn't find yours on the site so I can't tell you exactly which bracket to get. They're both Pioneer head units so it's worth a try. The bracket is a generic bracket made for most Toyota cavities to support double DIN sized head units. I had to do some slight Dremel work to get everything to line up with the stock mounting bracket. A solid afternoon with everything and I was set by the end of the day.
I had to contact OEM Audio Plus about how to get power to their amplifier because they have a replacement harness for the stock harness. But that's information that doesn't pertain to you unless you own their system with a subwoofer.
Tl;dr: Links 1-3 are what you need to connect everything. Link 4 is some random accessory I bought that happened to work things out. Link 5 is a bracket adapter to the stock bracket. Last link is the site that showed me all the stuff I needed and I just looked them all up on Amazon.
https://www.amazon.com/gp/product/B07GD8627K/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 this is the harness i used, has the reverse 6v signal already to go. all you need us usb retention https://www.amazon.com/gp/product/B01DJ4KVQ6/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
then the speaker harness. https://www.amazon.com/gp/product/B0002BEQJ8/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
and lastly the antenna harness https://www.amazon.com/gp/product/B003VYWSES/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
these were all the things i used to wire in my kenwood. besides the tool to keep steering wheel buttons https://www.amazon.com/gp/product/B00J4W10XG/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
the autoharnesshouse harness makes it easy to use the maestro by the way. hope this helped. i have a 2017 wrx by the way so i dont know if there is a difference with 2015 and the new 2018+s
Do yourself a favor and get a reverse harness set from something like Metra. It'll break out the connections into bare wires in fairly standard color coding. Yellow is hot +12V, Red is switched +12V, Black is Ground, Blue is amp +12V, etc.
Metra Harness Set
Antenna Adapter
This might be an elaborate way of answering your first question, but mostly I wanted to write out my experience of doing this exact thing. Also apparently I need to split this up into 2 replies.
​
I have an AVH-W4400NEX and a 2012 Prius Plug-In. After buying all the stuff I needed...
​
I believe I set aside a Saturday afternoon to swap it out myself, and also install a dash cam with both front and rear cameras (the car already had backup camera built in). I ended up working on this through all of the weekend, and then did some more tweaks the following weekend.
I got this usb harness and these things to get it to work. Plug and play harness. Excellent unit. Never realized how good the stock speakers in this car were, until I got a new headunit.
AXXESS AX-TOYUSB - USB-Auxilliary... https://www.amazon.com/dp/B00QF01H2E?ref=yo_pop_ma_swf
Metra 40-LX11 Antenna Adaptor... https://www.amazon.com/dp/B003VYWSES?ref=yo_pop_ma_swf
And the beatsonic bh-1 harness kit
https://imgur.com/a/6vPuFgG
Dash kit:
https://www.amazon.com/Metra-99-8249-Single-Double-Dash/dp/B016D9PI8K
Wiring Harness:
https://www.amazon.com/Axxess-AX-TYAMP2-SWC-Interface-2012-Up-Vehicles/dp/B01MG1X81P
Backup Camera Harness:
https://www.amazon.com/Axxess-AX-TOYCAM3-6V-Toyota-Back-Up-Camera/dp/B01N8UIX4A
AM/Fm adapter cable:
https://www.amazon.com/Metra-40-LX11-Antenna-Adaptor-Cable/dp/B003VYWSES
That it for parts, There is not much info on the 2017 Camry, but it looks like the stereo is the same as the 2016, if you could post a pic of the connectors I can make sure these parts are right. But these should be the correct parts.