Reddit Reddit reviews Monoprice 105597 3-Feet Premium Stereo Male to 2RCA Male 22AWG Cable - Black

We found 50 Reddit comments about Monoprice 105597 3-Feet Premium Stereo Male to 2RCA Male 22AWG Cable - Black. Here are the top ones, ranked by their Reddit score.

Audio & Video Accessories
Audio & Video Cables & Interconnects
Accessories & Supplies
Electronics
RCA Cables
Audio Cables
Monoprice 105597 3-Feet Premium Stereo Male to 2RCA Male 22AWG Cable - Black
Most home audio systems with an amplifier or receiver use RCA jacks for audio inputsThis cable is ideal for connecting the output of your MP3 player or phone to your home audio systemThe cable is made of heavy-duty coaxial cable for each conductor
Check price on Amazon

50 Reddit comments about Monoprice 105597 3-Feet Premium Stereo Male to 2RCA Male 22AWG Cable - Black:

u/Rrussell2060 · 8 pointsr/BudgetAudiophile

To build a system using the minimum recommendations from this sub, let's start with this diagram: http://i.imgur.com/Z8FMJ.png
DAC is optional, so is a subwoofer but I recommend one.

DAC: Behringer UCA202 $29.99 Link: http://amzn.com/B000KW2YEI

Amplifier: SMSL SA-50 $68.99 Link: http://amzn.com/B00F0H8TOC

Subwoofer: Dayton Audio SUB-800 $99.00 Link: http://amzn.com/B0063NU30K

Bookshelf Speakers: Micca MB42X $89.00 Link: http://amzn.com/B00E7H8GG2

Wire: 16-gauge Speaker Wire $8.00 Link: http://amzn.com/B006LW0WDQ

With DAC, this cable: Stereo Male to 2 RCA Male $5 Link: http://amzn.com/B00I0HPK6O

Without DAC, this cable: Monoprice 105597 3-Feet Premium Stereo Male to 2RCA Male $5 Link: http://amzn.com/B0094A1F3S

This is a great starter system, I would have loved to had something like this starting out.
All of these pieces can be upgraded, do your research. Look for sales etc. Good luck and have fun.

u/JohnBooty · 8 pointsr/diyaudio

I've built a bunch! Those instructions are fine. Only thing I'd change is I'd use a round speaker terminal cup in step #14, rather than the square one they show in the picture. Something like this in other words. Just because it's easier to cut a round hole -- you can just use a round circle cutting bit in your drill. You can get them for as low as like $2ea on Amazon or elsewhere.

> Do I need an amplifier?

Something like a cheap Lepai is fine.

A "real" amp like this or this or a used home theater amp for $50 from Craigslist will more or less get the full 100% of performance from the Overnight Sensations at higher volumes. A small Class D amp like this is a good compromise IMHO.

All of those amps ought to sound the same at low volumes. For "desktop listening" where you're sitting a few feet away, the Lepai should get plenty loud.

> Do I need a digital to audio converter?

Probably not. With the possible exception of the Lepai, all the amps I linked to have a dual RCA audio input. The typical "red and white audio inputs" you've surely seen in many places. All you need is a basic headphone-to-RCA adapter like this, assuming your music playing thingy has a headphone jack.

https://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/ref=sr_1_4?ie=UTF8&qid=1483958406&sr=8-4&keywords=headphone+to+rca

u/k3uuu · 6 pointsr/headphones

My guess is a set of 3.5mm male jack to y split RCA male jack cables. The idea is that you're using the onboard DAC of your macbook, and so the signal running into your magni should be analog already (hence coming from the 3.5mm as opposed to USB)

EDIT: Here's an amazon link to what I'm talking about.

https://www.amazon.com/gp/aw/d/B0094A1F3S/ref=sxts_sxwds-tsp_1?ie=UTF8&qid=1502737902&sr=1&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=3155181382&pd_rd_wg=6JGGN&pf_rd_r=SEMDWMKMB2F1525836EN&pf_rd_s=mobile-sx-top-slot&pf_rd_t=9701&pd_rd_i=B0094A1F3S&pd_rd_w=SvWFK&pf_rd_i=3.5mm+to+rca&pd_rd_r=8KY5TN4QKTAN8WF4WWV0&pi=AC_SX236_SY340_QL65

If I'm wrong someone please correct me before this guy wastes 7 bucks.

u/sk9592 · 6 pointsr/hometheater

You will want three 3.5mm stereo jack to RCA cables.

Each one of those three 3.5mm outputs on the rear of your motherboard output two channels:

  • Green outputs front left and right (stereo)

  • Black outputs the two surround channels

  • Orange outputs the center and subwoofer channels
u/boombap33 · 4 pointsr/audiophile

Monoprice 105597 3-Feet Premium Stereo Male to 2RCA Male 22AWG Cable - Black https://www.amazon.com/dp/B0094A1F3S/ref=cm_sw_r_other_apa_tONoxbSV404SF

u/ImaginaryCheetah · 3 pointsr/hometheater

>Wharfedale modus cube series 2

apparently 75watts RMS @ 6ohm. so your amp will need to handle 6ohm loads.

https://www.amazon.com/Channel-Audio-Amplifier-Professional-Speakers/dp/B071XQGYRJ/

and

https://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/

would get you there. using the headphone output from the back of the TV.

or, as others have said, you can get a used amp for cheap at places like goodwill.

u/Umlautica · 3 pointsr/diyaudio

The good news is that everything is already wired for sound, the bad news is that you'll need to buy amp(s) in order to use the speakers. The cable that you're holding up is RCA and is not powerful enough to drive a speaker. You'll need something like a multi-zone amp for 6 channels if you want to use all of the speakers in the house. These are ambient house speakers and not speakers set up for a home theater though right?

An option that might work well if you like Chromecast is to buy two or three pairs of this SMSL SA50 amps with the Chromecast Audio devices. This would also allow you to control multiple zones for music using each Chromecast audio. Each Chromecast Audio connects with each amp using a 3.5mm to RCA cable and then each SMSL amp connects to the gold terminals on the wall using speaker cable.

u/Arve · 3 pointsr/headphones

> Can I get a lightning -> inputs cable and connect my iphone5 through the amp for listening at home? Does this even make sense and is it worth doing?

Lightning is a purely digital connection, so no, it doesn't make sense.

While it is possible to connect a regular DAC to the iPhone using the camera connection kit, and connect the DAC to the Creek, I'm not sure I would bother. By looking at the specs of the Creek, it's not much more powerful than the iPhone is on its own, and has significantly worse distortion, plus the output impedance is unknown on the Creek, and is known to be good on the iPhone.

However, you already have the device. If you want to try, all you need is a 3.5mm TRS to dual RCA like this. The iPhone headphone output is a line output, and can safely be plugged into any stereo equipment with RCA receptables - just remember to turn the volume on the iPhone all the way up.

u/Kerry56 · 3 pointsr/headphones

By the way, you could use the E10k as a DAC alone, and output to a more powerful amp, like the Magni 2. Might save some cash.

Use a 3.5mm plug in the line out, on the back of the E10k and you'll need RCA plugs on the other end of the cable. Like this Monoprice cable.

u/EinTheVariance · 3 pointsr/headphones

it looks like the GSX1000 has a "speaker out" which I believe is a line out based on spec sheet: https://en-us.sennheiser.com/global-downloads/file/8226/GSX_1000_-_Fact_sheet.pdf

So you should use that to line out to the magni 3 via a 3.5mm to RCA cable (like this: https://www.amazon.co.uk/dp/B0094A1F3S/). That way you won't be double amping.

u/noelsusman · 2 pointsr/Zeos

I bought the SMSL SA-60 because I wanted the extra 3.5mm input to be able to switch between my TV and a phone or something for music. I can hook up my TV and my phone using a 3.5mm to 3.5mm cable to the front of the and it works just fine, but when I use a 3.5mm to RCA cable into the back of the amp I can't get it to work (tried both my TV and my phone).

Did I get a defective product or am I a moron who doesn't know what the hell he's doing?

Also do you have a donation link or something like that? Your information has been extremely helpful.

u/y0y0ma · 2 pointsr/BudgetAudiophile

I think your situation is pretty similar to mine - except I am based in Europe. I also had a very small budget was terribly confused. But I went ahead and bought used speakers + stereo receiver and am pretty happy with my purchase.

This is how my setup looks like. The TV is cheap (~300€) and the audio setup cost me another 100€, including a 3.5 mm to RCA cable and 16 gauge speaker cable. I would rather go for a passive speaker because it means more control over factors like distortion. Plus, a cheap used amp/receiver can added while effectively staying within the same budget.

u/tmccoy00 · 2 pointsr/Beatmatch

> I'm wondering how well mixing will work using these speakers. The Amphitheater only has an Aux In port, so I'm wondering if a short RCA to Aux cable will be sufficient and not generate too much static.

Yes - a cable like this will be fine - nice and short and you shouldn't have any issues.

http://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/ref=sr_1_1?s=aht&ie=UTF8&qid=1452339040&sr=1-1&keywords=rca+to+3.5mm&refinements=p_n_feature_keywords_four_browse-bin%3A7623518011

u/QuipA · 2 pointsr/headphones

> what cables I would have to buy

that depends on what you are connecting to the Magni 2.

Either you need a

3,5mm to male RCA. This way you can connect the Magni 2 to the line output of a PC or DAC/Amp combo that uses a 3,5mm line out (FiiO E10K)

or you need a

Male to male RCA interconnect cable to connect a dedicated DAC or line out signal from a receiver.

u/tielknight · 2 pointsr/buildapcsales

Example : https://www.amazon.com/Lepy-LP-2024A-Amplifier-Stereo-Supply/dp/B00ULRFQ1A

They connector via a RCA to Audio Cable like this

You wire the speakers to the amp and use the RCA to Audio cable to plug it into your computer.

u/adrianmonk · 2 pointsr/audiophile

So you have a complete, working Panasonic SC-PM29, right?

In that case, leave it intact (Panasonic speakers plugged into Panasonic electronics unit). Then, as you can see in the second photo, the back panel has an input labeled "AUX" (one red and one white connector). You want to get a 3.5mm phono to dual-RCA cable like this or this and use that connect the AUX port to the computer. Then turn the stereo on, select the AUX input, and you should be good to go.

u/az0606 · 2 pointsr/headphones

Honestly, for the interconnects, just shop mononprice, or amazonbasics and other similar brands, unless you really want them to be neat. Don't overpay on cables unless you just have cash to burn or want a certain aesthetic.

https://smile.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/ref=sr_1_8?keywords=3.5mm+to+rca&qid=1555461246&s=gateway&sr=8-8

https://smile.amazon.com/AmazonBasics-3-5mm-2-Male-Adapter-Cable/dp/B01D5H8KO2/ref=sr_1_3?keywords=3.5mm+to+rca&qid=1555461246&s=gateway&sr=8-3

The less stuff in the chain the better; I wouldn't run my headphones through the receiver unless I wanted the receiver itself to be my amp. Some people do that but receivers usually have a high output impedance. Not bad if you're powering something more power hungry, but IEMs and lower impedance headphoness (ex: Philips Fidelio X2) will have issues.

You'd want the magni 3 or magni 2 uber. You'd have the speakers connected to the receiver, and the pre-amp output from the magni going to the receiver. From the fulla, you'd want the line out to go to the magni. Bit confusing but you should be able to figure it out.

u/rssvitamins · 2 pointsr/headphones

WAIT Your speaker cable is wrong! I'll find you one then edit in a sec

This is what you need
http://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y

Make sure 50 feets is long enough, they do 100 as well

The 3.5 mm to RCA is fine, theres a cheaper one here http://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S

I had another look at the picture of the speakers, they have the type that unscrews so you don't need banana plugs.

You'll want to split about 5cm of that speaker cable apart from both ends, strip ~2cm of insulation off, unscrew the plastic plastic bits off the back of the speakers, feed the exposed copper into the little holes then screw them up tightly. You then have to trace the wire to the other end and connect them to the amp, connect the 3.5mm cable from your source (pc, phone w/e) to the RCA input on the amp, power it up and you're all set

u/netinept · 2 pointsr/amazonecho

Exactly. A proper stereo is the solution here. Use a decent amp and speakers for the audio and pair it with an Echo Dot to control it, using the line out jack on the Dot to connect it to the amp.

If /u/Treas0n is looking for a good budget option, I'd highly recommend the Lepai amp + Dayton speaker setup. This setup is the go-to budget kit on /r/audiophile and would be plenty loud with really good sound quality. It's about $90 for the whole kit (+$30-$50 for an Echo Dot):

Lepai LP-2020TI Texas Instruments TPA3118 Hi-Fi Stereo Audio Mini Amplifier with Power Supply https://www.amazon.com/dp/B071FJF4FF/ (don't go for this one anymore, grab a tripath version)

Kinter K2020A+ Limited Edition ORIGINAL Tripath TA2020-020 Class-T Hi-Fi Audio Mini Amplifier with 12V 5A Power Supply Black https://www.amazon.com/gp/product/B077Z7DBRT

Dayton Audio B652-AIR 6-1/2" 2-Way Bookshelf Speaker with AMT Tweeter Pair https://www.amazon.com/dp/B00NOA58RS/

AmazonBasics 16-Gauge Speaker Wire - 50 Feet https://www.amazon.com/dp/B006LW0WDQ/

Monoprice 105597 3-Feet Premium Stereo Male to 2RCA Male 22AWG Cable - Black https://www.amazon.com/dp/B0094A1F3S/

If the OP wants even bigger sound then add a powered sub for $100 more (you may want to double up on your 16ga speaker wire for connecting the subwoofer between the stereo speakers and the amp)

Polk Audio PSW10 10-Inch Powered Subwoofer (Single, Black) https://www.amazon.com/dp/B0002KVQBA/ref=cm_sw_r_cp_apa_IEFWBbD0GFQVW

u/sinistar914 · 2 pointsr/hometheater

Keep it simple. Get a headphone to rca cable. The speakers will be an improvement over the built in speakers but it's not worth the expense of try to convert digital to analog. This is what you need; https://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/ref=sr_1_1?ie=UTF8&qid=1472918070&sr=8-1&keywords=Headphone+to+rca+cable

u/Preclude · 2 pointsr/ZReviews

There are two good ways to do this:
Option 1:
Grab yourself a set of these. https://www.amazon.com/CableWholesales-Audio-Piggyback-Cable-Female/dp/B000I94FAE/
Plug the double sided end into your source, and then feed the other end to your speakers. You'll then plug another set of RCA into the open ends on the source and send them to your Sub.
Option 2: If you don't like using the windows volume control, then you'll get one of these: https://www.amazon.com/PAC-LC-1-Remote-Amplifier-Controller/dp/B0002J226O/
Also this: https://www.amazon.com/Link-BM105-Male-Barrel-Connectors/dp/B001NCDBEQ
The Barrel connectors will go into your source. Then plus the controller into the barrel connectors, then the piggyback cable into the other end of the controller. Then plug your RCA into backside of the Piggyback and put one set into the speakers, and one set into the sub.
Once you've chosen from the two options, you'll need to set up the speaker and the sub so the volume matches.
To do that I would turn the computer audio up to maximum. Then, turn your speakers up as loud as you would ever comfortably listen to them. Then get your subwoofer gain and crossover where you want it. You will then use your PC volume/or the control nob to control the volume of both of them. If you use the control nob, your PC volume will always be at max.
EDIT: You might also need this to get the sound from your motherboard audio out to RCA: https://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/

u/senorroboto · 2 pointsr/buildapc

I assume you're trying to use the surround sound to play audio from your PC?

I've got some good news and bad news. The bad news is that you cannot get surround sound from your PC to your DVD player system. This is because the DVD player system only has stereo auxiliary inputs.

The good news is you can get stereo audio from your PC to your DVD player system. All you need is a male 3.5mm to male RCA adapter: https://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/ longer ones are available if 3ft isn't enough. That'll plug into your green audio port on your motherboard. Be sure to set your PC output to stereo.

This stereo limitation is because of your DVD player stereo being a cheaper model and not a proper surround receiver setup. It's only designed to give surround sound from DVDs it plays.

u/hack_tc · 2 pointsr/BudgetAudiophile

The cheapest I would go would be this Dayton bundle. If you can spend an extra $15 or so and make this same combo with the Dayton B652 Air speakers instead, that would be even better. Otherwise, you could also get the Dayton B452 Speakers with that same amp as the cheapest solution, but that 4-1/2" driver isn't going to deliver the lows like the 6-1/2" will, so really splurge for the larger size if you can. You likely also need a this cord if your TV has analog audio out. If it has Optical audio out, you will need this cable instead.

Hope this helps. Good luck.

u/rubberbandage · 2 pointsr/audioengineering

What a great boombox for audio in/out options! I take it your laptop has a mic/line-in port? If so, my recommendation is to first get yourself two 1/8" stereo-to-dual RCA cables (like these, brand not important).

  1. Connect a cable from your headphone jack on the laptop to RCA/line-in on the RX-5090, and a cable from the RCA line-out back to your laptop’s line-in port.
  2. Set up a new stereo recording track in your DAW set to line in.
  3. Pop a cassette in that boom box and hit record
  4. Start recording to that track in your DAW
  5. Start playback of one of your songs from your laptop (if you’ve made a new stereo track in your existing song session, playback will probably start automatically while recording)
  6. At this point the audio should go from your laptop’s headphone port -> line in of the 5090 -> cassette -> 5090 line out -> laptop line-in -> DAW, and you’ll end up with a “print” of the audio path via the tape deck. This is exactly how outboard audio effects work.

    Rinse and repeat! Hope that helps, I’m happy to clarify more if needed.
u/OSPFv3 · 1 pointr/techsupport

Looks like that laptop has s-video.


S-Video to Composite


Stereo Male to 2RCA Male

u/BuyingSpeakers · 1 pointr/Zeos

Everything arrived and I now have what are probably some stupid questions about setup. I would rather look a fool than break something though, so here we go:

  • I watched your tutorial about stripping speaker wire. I assume I cut appropriate lengths off the 25' spool and strip both ends?
  • It looked like your tutorial used a SMSL amplifier and you mentioned needing banana plugs because 16ga wire was too thick. Assuming I'll need those, want to give me a ref link for whatever your preferred brand is? The link given in the YouTube description is out of stock.
  • I've seen your diagram but I didn't buy a DAC, so do I need this to make the connection from my computer to the amplifier?
  • Assuming this is the correct adapter, I'll want to connect the 3.5mm end to the green port and the RCA ends to "Input 2" on the back of my SMSL SA60?

    Hopefully this isn't too bothersome, I did do some Googling and am reasonably sure about what I need, but I wanted to confirm with you starting setup.
u/Devil_- · 1 pointr/Zeos

Thanks for replying also im new to the whole amp/dac thing do i need this to connect to pc...my pc doesn't have optical

u/SadArmordillo · 1 pointr/Zeos

Just finished putting these into a 2.0 setup for my college desk, with a lepai 2020A+. Works great, fills up my room without breaking a sweat. Planning on grabbing one of these so that I can have an input from my PC permanently as well as another aux that can be used for visitor's phones and such.

u/arthlo · 1 pointr/Twitch

You have a similar setup to what I have, and the noise sounds pretty much the same as what I used to have in my setup. What I had to do was add in two hum destroyers (https://www.amazon.com/gp/product/B000KUD2G4/), one in-line between each PC and the mixer.

I have a cord from the PC's speaker out, which splits into two RCA males for L/R (https://www.amazon.com/gp/product/B0094A1F3S/), and plugs into the hum destroyer, and then another set of cords from the hum destroyer into the mixer (https://www.amazon.com/gp/product/B00I0HPK6O/). Same setup from each PC (streaming and gaming).

After adding those, my sound is crystal clear now. So can't guarantee that will fix your problem, but it fixed mine, which sounded similar.

u/AlanDavison · 1 pointr/techsupport

Then you just need to connect it to the 2 track with this (or similar), and make sure the to main mix button isn't pressed for 2 track.

Either that, or set your default audio device to the mixer, and make sure the to main mix button isn't pressed for that.

u/ocinn · 1 pointr/BudgetAudiophile

the SMSL Mini 5 has a great headphone amp but you need a DAC. If you PC has an optical out you can get the FIIO D03K.

Parts list:
https://www.amazon.com/gp/aw/d/B00JSNM1VQ/
and
https://www.amazon.com/gp/aw/d/B003L1717K/
and
https://www.amazon.com/gp/aw/d/B005K2TXMO?pc_redir=T1

Or

https://www.amazon.com/gp/aw/d/B005K2TXMO/
https://www.amazon.com/gp/aw/d/B00NMBISBW/
https://www.amazon.com/gp/aw/d/B00899BEGI/ (only for mini5)
https://www.amazon.com/gp/aw/d/B0087X725S/ (for Mini5, gets very hot)
https://www.amazon.com/gp/aw/d/B0094A1F3S/ (adhesive for heatsink)

You also need speaker wire.

u/Zeeall · 1 pointr/BudgetAudiophile

Another suggestion. If you want to play stupid loud with loads of bass.


This amplifier:
https://www.amazon.com/SMSL-50Wx2-TDA7492-Amplifier-Adapter/dp/B00F0H8TOC

And these speakers:
https://www.amazon.com/Yamaha-NS-6490-Bookshelf-Speakers-Finish/dp/B00018Q4GA/


You will also need some speaker wire:

https://www.amazon.com/AmazonBasics-16-Gauge-Audio-Stereo-Speaker/dp/B006LW0WDQ/


And a cable to connect the laptop to the amplifier

https://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/


Total price: $213.15.

u/ranterbach · 1 pointr/pcmasterrace

Depends on whether you purchase powered or passive speakers. Powered speakers do not require an external amp, passive speakers do.

Budget recommendation:

Micca MB42X Speakers

SMSL SA-50 Amplifier


You need this cable to connect the PC audio to the amp.

And this speaker wire to go from the amp to the speakers.

Plug the 3.5mm into the audio port on the back of the PC. Plug the red and white RCA plugs into the "Audio In" ports on the back of the amp.

Place the speakers and amp where you want them and measure how much speaker wire you need. Cut two pieces of speaker wire the appropriate length for each speaker (4 pieces in total).

You'll have to strip the insulation off the speaker wire. Very simple, you can just cut around the wire with a razor blade. Strip about 1/2" of insulation off each end of each length of speaker wire. Twist the ends tightly to prevent stray wire strands (the ends really should be tinned, but that isn't imperative).

Now you'll unscrew the plastic nut on the connections on the back of the amp and on each speaker. Just loosen it far enough to expose the small hole drilled through the side of the post. Insert the speaker wires, then tighten down the nuts. They need to be pretty snug. You don't want any movement of the speaker wire in the holes in the connectors. The wire you put in the black post on the speaker goes in the black post on the amp, and likewise for the reds. The connectors on the amp are labeled "R" and "L." Self-explanatory, left speaker wires go in the connectors marked "L," etc.

Turn the volume knob on the amp to zero, turn on the amp, then increase the volume. Leave Windows volume at 100, use the amp to control volume.

If you don't want to mess with cutting speaker wire, you can purchase premade cables like these: http://www.amazon.com/Silverback-Speaker-Sewell-Banana-Strand/dp/B009RT2IAK/ref=sr_1_3?s=electronics&ie=UTF8&qid=1452657250&sr=1-3&keywords=speaker+cables

Those have banana plugs installed, so all you have to do is plug them into the ends of the connector posts like a standard audio jack. Do whatever you are most comfortable with, but cutting your own speaker wire is dead simple, and you get 50 feet of it for $8, as opposed to $35 for the premade cables (you'll need two, as they are sold individually).

u/scottymoze · 1 pointr/hometheater

So that speaker system has 3 inputs: 1 RCA (red/white) and 2 headphone jack. With your three devices, assuming your TV has no audio out, you can connect each device via RCA cable, headphone cable, or an adapter for one to the other, to those three inputs on the speaker system, for your cheapest possible solution. So a mix of these cables should do, hopefully? Let us know what you think:

https://www.amazon.com/AmazonBasics-3-5mm-Stereo-Audio-Cable/dp/B00NO73MUQ/ref=zg_bs_597566_1?_encoding=UTF8&psc=1&refRID=77XCX74SBHRRD7D85Q1V

https://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/ref=zg_bs_597566_6?_encoding=UTF8&psc=1&refRID=77XCX74SBHRRD7D85Q1V

https://www.amazon.com/MOCREO-Splitter-1-Mini-Stereo-Adapter/dp/B015J4OKZW/ref=zg_bs_597546_11?_encoding=UTF8&psc=1&refRID=2Q1JZS2CEWWGYGWWCR6R

https://www.amazon.com/Monoprice-1-5ft-Premium-22AWG-Cable/dp/B003L1717K/ref=zg_bs_597546_19?_encoding=UTF8&psc=1&refRID=2Q1JZS2CEWWGYGWWCR6R

EDIT: and here's some extensions also, in case you grab any of the above and they're too short:

https://www.amazon.com/AmazonBasics-3-5mm-Female-Stereo-Audio/dp/B01CNAUYBY/ref=sr_1_3?s=aht&ie=UTF8&qid=1481742465&sr=1-3&keywords=headphone+extension

https://www.amazon.com/CableWholesale-6-Feet-Cblwhl-Extension-10R1-02206/dp/B000I1GZ0U/ref=sr_1_1?s=aht&ie=UTF8&qid=1481742502&sr=1-1&keywords=rca+extension

EDIT 2: Can you send us the brand/model # of your TV so we can check out the inputs/outputs? Thanks!

u/pazzescu · 1 pointr/audiophile

I purchased an SMSL SA50 and a pair of Kanto YUMI passive speakers, I am trying to figure out if I can use something like this https://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/ref=sr_1_1?ie=UTF8&qid=1480443436&sr=8-1&keywords=rca+to+rca+monoprice, but that also has video (yellow male end) along with the rca end to connect my SMSL SA50 to my motherboard? (X99A SLI krait https://us.msi.com/Motherboard/X99A-SLI-Krait-Edition.html#hero-overview) It has LS out, CS out and R out (sic, as I recall) I was thinking I would connect it via CS out. I feel like I'm overthinking this. The reason I am using this is because it is just an old cord that I had with my cable stash. Currently I have the audio connected to a rosewill keyboard so that I can connect headphones there, but I presume that that won't work with the new setup.

u/MUSAFFA1 · 1 pointr/audio

Get a tape player with an A/C adapter. Something like this.

Get a 12v inverter. Something like this.

Using the headphone jack on the tape player, they can connect a 3.5mm AUX cable in their car (assuming they have an AUX input?) and a 3.5mm RCA cable to connect to the home stereo.

*Also, if I may make a suggestion, using the car inverter > a/c adapter > AUX input in the car will undoubtedly create a bit of engine noise through your speakers. Using one of these will eliminate most of that noice.

u/the_blue_wizard · 1 pointr/audio

The MICCA G2 has a 3.5mm STEREO output, that also serves as a 3.5mm Optical Output.

You simply need a 3.5mm Stereo to 2x (Red/White) RCA. These are fairly common.

https://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Daps&field-keywords=3.5mm+Stereo+to+RCA

However, most of these cables assume the RCA connector will be close together, so you want one where the place where the cable joins 2x into 1x is wide enough or can be split apart sufficiently to each your studio monitors.

For Example, look at this cable -

https://www.amazon.com/JSAUX-Shielded-Gold-Plated-Compatible-Smartphones/dp/B07D8M5DML/

On the right side are a column of Photos, choose the second photo down. Notice that you can not move these RCA connector very far from each other.

However a cable like this Monoprice 3.5mm to RCA is two cables all the way back to the 3.5mm Plug, and the two cables can be split apart as far as you need them. This come in 1.5ft, 3ft, 6ft, 10ft, 15ft, 25ft, and 35ft so it can accommodate whatever length you need.

https://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/ref=sr_1_15?ie=UTF8&qid=1538364593&sr=8-15&keywords=3.5mm+Stereo+to+RCA

So, the 3.5mm out on the Micca G2 is STEREO. Use a 3.5mm Stereo plug and you can run each channel out to the appropriate speaker.

u/Armsc · 1 pointr/audio

Get this cable to go from the amp to the sub. Get this cable to go from the soundcard to the first cable that is going into the amp. You still have to adjust the sub and amp volumes separately but it's what you have to do with a sub with no high level outputs.

u/rehpotsirhc123 · 1 pointr/pcmasterrace

It comes with an 18 watt, 2 amp brick with will supply 36 watts, the other one is 24 watt 5 amps so 120 watts. You can always add it later though.

I'd probably get this cable it's a little nicer, you might want a longer one though depending on how far your PC is to the speaker with the input. https://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S

u/Boleo · 1 pointr/CarAV

It's tough to say without seeing it physically. It sounds well thought out. Sometimes there are mistakes in the install or setup.

I am also a little suspicious of the head unit. Everything else sounds pretty standard but I have no experience with that brand. I know it kind of fits well that that car's dash. The sub is pretty old I think. You may want to turn the bass boost off on the 4 channel amp.

You are sure that it is high pass filter on the 4 channel, and low pass filter on the mono, yes?

You can try borrowing a different head unit to see how it sounds, or I guess you could try connecting the amps one at a time to a phone/laptop with these.

https://www.amazon.com/dp/B000067RC4/

https://www.amazon.com/dp/B0094A1F3S/


EDIT: After reading remarkable53's post it sounds like they have the answer. Too bad if you cannot return the head unit. Since you already installed all that gear, I would second the idea to maybe go back to the factory head unit, and install some line out converters so you can use your amps. Use the AUX/USB with a phone or something. Or, use this kit and install any other head unit you want.

https://www.amazon.com/Metra-99-7514B-Single-Installation-Painted/dp/B002UMF74A

u/firesquidwao · 1 pointr/headphones

Although you've decided, just like to add some information;

the modi is a dac but dac is really just fancy for an external sound card. modi is basically that sound card you have in your computer, but sounds a lot better and is outside your computer.

Sound card makes digital signal into analog signal. the problem the dude earlier was talking about with putting the analog signal from your computer into a magni is that you might get electric noise from inside your computer interfering with the sound card inside, and the interference will be much more audible with an amp. Digital signals don't get the interference so the usb output is clean, unlike the analog output.

buying a modi would remove that problem, and along with that it would probs sound much much better than the soundcard you have in your computer.

Also, when plugging your computer into your magni, you will need something like this, since the magni doesn't have a 3.5mm input if i remember correctly.

u/covertash · 1 pointr/headphones

You could use a 3.5mm to RCA cable that can plug directly into the Magni 2. Personally, I haven't had any complaints from Monoprice cables in general - pretty much all of my RCA cables are from them - so I think you should be ok with that.

Here's an example, and is fairly inexpensive:

http://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/ref=sr_1_2?ie=UTF8&qid=1463889450&sr=8-2&keywords=3.5+to+rca

u/slipper34 · 1 pointr/audio

You don't really need two 3.5mm inputs, if one of the inputs is RCA you can use a 3.5mm->RCA cable or even adapter to plug your monitor into it and leave the other input free: https://www.amazon.com/dp/B0094A1F3S/ref=cm_sw_r_cp_apa_NOmdAb91XY2DZ

Plus your future record player may have native RCA output, or some other format, so you may not need 2x 3.5mm anyway.

u/pppjurac · 1 pointr/audio

Yes sub in 2.1 it will work as analog signal is brought in by stereo jack. Do not expect steelar quality and earth shattering kaboom as this is really a tiny sub, though.

To connect directly TV to Creative speakers you will need RCA to stereo cable (few dollars at most), something like that:

https://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/ref=sr_1_2?ie=UTF8&qid=1468933385&sr=8-2&keywords=rca+to+stereo

u/HannibalK · 0 pointsr/audiophile

I plan on purchasing the $170 setup this subreddit recommends, my question is if I'm planning on playing them off a standard motherboard what additional pieces do I need?

I think I need two pairs of Mediabridge 16AWG ULTRA Series Speaker Cable with Dual Gold Plated Banana Tips and then one of these.

I think this would allow me to connect both speakers to my amp and then my amp to my pc.

Is this correct?