Reddit reviews Monoprice 109436 Gold Plated Speaker Banana Plugs – 5 Pairs – Closed Screw Type, For Speaker Wire, Home Theater, Wall Plates And More
We found 46 Reddit comments about Monoprice 109436 Gold Plated Speaker Banana Plugs – 5 Pairs – Closed Screw Type, For Speaker Wire, Home Theater, Wall Plates And More. Here are the top ones, ranked by their Reddit score.
Can accept bare wire or spades. Can accept 12 to 18 AWG speaker wires.Color coded Black/red rings for maintaining proper polaritySecure, positive contact with binding postsCorrosion resistant, 24K Gold plated brass plugEach order includes five pairs (10 plugs total)
Give me about an hour and I'll edit this comment with store links to what I got.
Edit: Here is the list
Total - about 40 - 50 depending on where you get your stuff.
I think those speaker stands you can do better for like 10 bucks more.
Now when it comes to AVR there is better option with really good discount like yours MSRP 300 the one bellow MSRP 550 and only like 40 bucks more with plenty of features and definitely a step up is Yamaha TSR 5810 it's only $209 and much better than that entry level receiver you picked.
Has even Atmos in and all the goodies in case you expand later.
Speaker wire is fine but for neater connection maybe add for 7 bucks banana plugs
https://www.amazon.com/Monoprice-109436-Plated-Speaker-Banana/dp/B0097JLQVC
Trim it up if you want. I have been very pleaed with my investment in banana plugs, in your case it would only be at the speaker end. You put them on the wire then can then just plug them into the speaker.
Strange? You mean the speaker inputs? That's for speaker cable. Banana plugs are optional.
Should also take banana plugs if you have those type of cables instead of bare wire right into the hole.
https://www.amazon.com/Monoprice-109436-Plated-Speaker-Banana/dp/B0097JLQVC
I'd replace the Amazon speaker wire with Monoprice Oxygen free pure copper wire instead. The Amazon wire is copper cladded aluminum not pure copper.
Here's a basic home theater accessories list and a how to video for connecting speaker wire to screw type banana plugs. You'll need 2 pairs of banana plugs per front soundstage speaker hookup (1 pair for each end.) Alternatively you can just remove a small amount of shielding from the speaker wire and twist the copper strands then insert them into their corresponding(+-) binding post or spring clip.
Subwoofer cable
[ Monoprice 16 AWG copper speaker wire 50 ft.]
(http://www.monoprice.com/mobile/product/details/2749?gclid=Cj0KEQjwpZO_BRDym6K_nMye7cEBEiQAVA7RaOXvFch7MQHt5reRutyDIcvqVn-NQg4mkLxXTsH6rDAaAu9D8P8HAQ)
Monoprice screw type banana plugs
connecting banana plugs video
More in depth speaker wire stripping and installing video
Subwoofer crawl technique
Hi, I actually had the exact same dilemma as you and about a month ago went for a 2.0 setup.
In the past I've tried a variety of computer speakers and nothing cut it. I never tried a soundbar, but I am super happy with my 2.0 setup.
So here is my $200 set up (big thanks to Zeos for helping me learn and pick out the parts):
$109 manufacturer refurbished Denon AVR 1513 receiver:
http://www.accessories4less.com/make-a-store/item/denavr1513/denon-avr-1513-5.1ch-home-theater-receiver-3d-ready/1.html?_escaped_fragment_=specifications#!specifications
$80 Micca MB42x bookshelf speakers:
http://amzn.to/188rnsc
$9.43 Speaker wire:
http://www.amazon.com/dp/B006LW0W5Y/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=YEA53M3RQ14Z&coliid=I31E8R7IOVMB4E
This is the wire stripper I bought but it is no longer available for prime so I would get a different one:
http://www.amazon.com/Irwin-2078305-Vise-Grip-5-Inch-Stripper/dp/B000JNLUQ6/ref=sr_1_13?ie=UTF8&qid=1394413512&sr=8-13&keywords=wire+stripper
Maybe get this one (but any will probably be fine):
http://www.amazon.com/Gardner-GS-40-Milwaukee-Clipper-Stripper/dp/B00004WLJX/ref=sr_1_11?s=hi&ie=UTF8&qid=1396936022&sr=1-11&keywords=wire+stripper
Lastly, banana plugs for the wires. Optional, but nice to have ($10.96):
http://www.amazon.com/Monoprice-109436-High-Quality-Copper-Speaker/dp/B0097JLQVC/ref=sr_1_2?ie=UTF8&qid=1394413889&sr=8-2&keywords=banana+plug
Total: ~ $250 with tax and shipping and whatnot.
One last piece of advice:
I originally tried the popular Lepai amp and hated it. I just couldn't get the volume I wanted from it.
Which solder on plugs do you use? Did you need a high wattage iron to heat it?
I use these plugs
I'll be honest, I haven't had time to really do an A/B test on them, and my schedule hasn't afforded me a lengthy listening session, but I am much more confident in these new cables.
I had previously been using this wire! with these banana plugs. They did the job, and I will continue to use those cables when testing equipment for functionality or if I do a temporary setup for a friend or something.
The new wire is 12 AWG single-conductor. I had considered doing 14 AWG dual-conductor (honestly just for looks), but I decided to go with the cheaper option. I may upload some pics at a later date as my setup has changed and moved around quite a bit since my first setup post.
Yeah great choice.
As far as cables, it really depends on how you have it set up.
The ideal scenario would be (for me at least):
The speakers and receiver have the ability to connect to bare speaker wire but I went the route of using these banana clips for a cleaner look.
Really it all depends on your set-up I guess. I can post some pics of mine to help clarify stuff as well.
The owner's manual can be downloaded as a pdf from Denon's website. I'd do that to start.
You'll want an audio cable to connect the CD changer:
https://smile.amazon.com/dp/B016QVZF06/
Speaker wire (recommended in the thread post):
https://smile.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y
And maybe banana plugs to connect the speaker wires. They aren't required but they make connecting stuff a lot easier:
https://smile.amazon.com/Monoprice-109436-Plated-Speaker-Banana/dp/B0097JLQVC/
Are you hooking up any other equipment?
Try banana plugs for a more secure connection.
Monoprice 109436 Gold Plated... https://www.amazon.com/dp/B0097JLQVC?ref=ppx_pop_mob_ap_share
No, generic is fine and I doubt they come with wire.
http://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0WDQ/ref=pd_sim_23_2?ie=UTF8&dpID=51IOxbn5fgL&dpSrc=sims&preST=_AC_UL160_SR150%2C160_&refRID=1K56846XM9J6X17Y4N42
Banana Plugs are just an easier way to plug the speaker wire into the amp and speakers - making everything nice.
http://www.amazon.com/Monoprice-109436-Copper-Speaker-Banana/dp/B0097JLQVC/ref=pd_sim_23_1?ie=UTF8&dpID=41QxY56AvVL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=1K56846XM9J6X17Y4N42
You need speaker wire. Unless you need very long lengths 16 gauge wire is good enough.
https://www.amazon.com/Performance-Gauge-Speaker-Oxygen-Copper/dp/B01N6EF3GZ
And a wire cutter for a clean job:
https://www.amazon.com/TEKTON-3797-7-Inch-Stripper-Cutter/dp/B00AZWWY2K
You can also buy banana plugs to install at the tips. Once you do this you never have to waste time inserting bare wire carefully into the posts.
https://www.amazon.com/Monoprice-109436-Plated-Speaker-Banana/dp/B0097JLQVC/ref=pd_aw_fbt_23_img_2/143-4216225-4180333?_encoding=UTF8&pd_rd_i=B0097JLQVC&pd_rd_r=9abe4956-cd3f-4392-835d-422b349f4f55&pd_rd_w=w5ces&pd_rd_wg=578Lx&pf_rd_p=6e6afc8a-fbbd-4649-97cf-4e08f5113612&pf_rd_r=ZXGYDM5KD6H0FC4Z4S8M&psc=1&refRID=ZXGYDM5KD6H0FC4Z4S8M
https://www.pyleusa.com/catalog/product/view/id/5929/s/12-gauge-100-ft-spool-of-high-quality-speaker-zip-wire/
https://www.pyleusa.com/14-gauge-100-ft-spool-of-high-quality-speaker-zip-wire-colors-may-vary.html
https://www.amazon.com/AmazonBasics-Subwoofer-Cable-50-Feet/dp/B01D5H8J7U
https://www.amazon.com/Monoprice-109436-Plated-Speaker-Banana/dp/B0097JLQVC
This https://www.amazon.com/Yamaha-RX-V383BL-5-1-Channel-Receiver-Bluetooth/dp/B06XXR6JK3/ref=dp_ob_title_ce
with this cable https://www.amazon.com/AmazonBasics-1-Male-2-Female-RCA-Y-Adapter/dp/B01D5H8RE0/ref=sr_1_4?s=electronics&ie=UTF8&qid=1499935753&sr=1-4&keywords=dual+subwoofer+adapter plug the purple end into the sub out on the receiver then run a left rca to one subwoofer and a right rca to the other(into the sub-in on the Pl-200). Run an hdmi from your Amazon Fire TV to an hdmi input on the receiver and then an hdmi out from the receiver to your tv. If you don't already have speaker wire I recommend https://www.amazon.com/gp/product/B00HZWYP1G/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 and if you want banana plugs these are good https://www.amazon.com/Monoprice-Plated-Speaker-Banana-Closed/dp/B0097JLQVC/ref=sr_1_1?s=electronics&ie=UTF8&qid=1499936973&sr=1-1-spons&keywords=4+pairs+banana+plugs&psc=1
You have already mentioned that size is a factor. In that case, I can recommend Denon SC-F109, which are almost the same size and about £10 more. Tried, tested and impressed. Never heard the QAcoustics so cannot say anything, but the Denon has a lot of fans in Germany apart from me.
Both of your amps are good enough for desktop use. Get the SA 50 if you also plan on using it for a small party.
The wire seems a bit expensive to me. For that price you could get 100 feet of speaker cable and banana plugs and attach them yourself. All you need is a wire stripper or a pocket knife. In fact, I don't even use banana plugs; they are only convenient if you plan to connect/disconnect speakers often. 12 AWG would be too thick for your purpose, 16 AWG (or even 18) is good enough. You could also save some money by buying per meter (or feet as you're in the UK!) from some sellers or check your local classifieds to see if someone wants to get rid of their extra speaker cable. Also, I can vouch for this 3.5mm to RCA cable. These are a little more expensive, but very well made and don't usually suffer from contact issues.
PS: Just wanted to add some more information about speaker dimensions. H x W x D mm
So the Wharfedales really are the smallest of the lot, and the Denons the biggest but only in depth.
Those aren't RCA type inputs on those speakers. They for either banana plugs or bare wire connection. You can cut the RCA jacks off of your speaker wires, then strip the ends down to bare wire..
https://s30.postimg.org/ekkm1em2p/image.jpg
You have to unscrew the red and black caps and insert the wires in the holes in the sides of the posts and then screw the caps back down to secure the wires.
Either that or you can buy banana plugs and connect those to the end of the wires. Then you just plug them into the holes in the center of the posts.
https://www.amazon.com/Monoprice-Plated-Speaker-Banana-Closed/dp/B0097JLQVC/ref=pd_lpo_23_bs_lp_img_2?_encoding=UTF8&psc=1&refRID=RESBVWTWQJRNZRSHNPD9
The micca speakers can use banana plugs or can just have the speaker wire put in them. They unscrew and there is a hole that you can put the wire through. Those are the banana plugs I use and they are great.
Also, this is more or less how it would work. That is with a DAC included. If you don't get a DAC, instead of 'computer usb' into the DAC, it will be a 3.5mm into the amp.
Hope this helps!
Here is the setup I went for in a small room. This is for a desk setup in a 11x14 room. Couldn't be happier for about 250$.
Speakers: 90$
https://www.amazon.com/gp/product/B00E7H8GG2/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Amp:70$
https://www.amazon.com/SMSL-50Wx2-TDA7492-Amplifier-Adapter/dp/B00F0H8TOC/ref=as_li_ss_tl?ie=UTF8&qid=1454215590&sr=8-1&keywords=smsl+amplifier&linkCode=sl1&tag=zeos-20&linkId=97458c4923f86af9ecf53e1a566a6fca
Sub:81$ https://www.amazon.com/gp/product/B00KGA6A8A/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Wire:8.50$
https://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0WDQ/ref=as_li_ss_tl?ie=UTF8&qid=1454214218&sr=8-4&keywords=speaker+wire&linkCode=sl1&tag=zeos-20&linkId=50aa0e85d9168eed8d40f824e4203a64
https://www.amazon.com/Monoprice-109436-Copper-Speaker-Banana/dp/B0097JLQVC/ref=as_li_ss_tl?ie=UTF8&qid=1454214342&sr=8-17&keywords=speaker+cable&linkCode=sl1&tag=zeos-20&linkId=2fe231768f52ad0ca86e94f394a83fca
Plugs 10$
https://www.amazon.com/Monoprice-109436-Copper-Speaker-Banana/dp/B0097JLQVC/ref=as_li_ss_tl?ie=UTF8&qid=1454214342&sr=8-17&keywords=speaker+cable&linkCode=sl1&tag=zeos-20&linkId=2fe231768f52ad0ca86e94f394a83fca
So, toning them out has been thoroughly answered but to answer how you connect your AVR to this, make some short speaker wires with banana plugs on each end to jump between the wall plate and the AVR.
There is also the closed-screw type, but I found them a little more difficult to install and the wire sticks out of the back, so it can make it more difficult to push the receiver closer to the wall.
http://www.amazon.com/Monoprice-109436-Copper-Speaker-Banana/dp/B0097JLQVC/ref=sr_1_1?s=electronics&ie=UTF8&qid=1462317284&sr=1-1&keywords=Monoprice+closed+screw
Get some banana plugs from Best buy. Easy to put the wire in them. Then just plug the banana cables into those holes. I got these. Work great! http://www.amazon.com/Monoprice-109436-Copper-Speaker-Banana/dp/B0097JLQVC/ref=sr_1_4?s=electronics&ie=UTF8&qid=1462989207&sr=1-4&keywords=banana+plugs
Yup, that subwoofer cable will work.
 
You can just buy a spool of speaker wire (like this) and that’s all you’ll need, although I recommend getting some banana plugs just to make it easier to unplug stuff if needed, but up to you.
So you can see the row or red and black connectors on the back of the receiver, those are labeled for the available speaker locations. Standard speaker wire can be used on those as it kinda threads through then screws down tight (banana plug connectors can also be used if purchased). The backs of the speakers have a matching red and black connection that the wire screws into as well. So each speaker will have one red and one black connection.
In my case with this specific setup I am using the amplifier in a bi-amp configuration where I am utilizing the 'Front A' connections for left and right as well as the 'bi-amp' connections. The Klipsch speakers have 2 red and 2 black plugs on the back of them for this purpose. When Bi-amp'ed the speakers are able to use the extra power that another channel may use to give more clarity and over volume.
Monoprice Banana Plugs - 5 pairs - CA$11 Amazon.ca Link
How does it work? I was under the impression that I could hook up the speakers to my AI usingsome of these through the L-R line out and the jobs a good?
How do I know what gauge to get? I this sufficient Wire, Bananas and Wire Cutters. I think I will skip the DAC for now and see how everything sounds? As I can always buy one later and add it in but how do I know if I need one?
Edit: Thank you for the help!
I will probably get flak for doing this but here you go:
Sony SSB1000 ($55) These speakers are pretty good for how cheap they are. Much better than the Micca Covos.
SMSL-SA-50 ($68) I have this amp and it is awesome how much it puts out. I see the people all the time recommend the Lepai LP-2020 for cheap setups but ignore that amp. Get this one.
There you have it. Cheap setup that is entirely expandable. Get some Banana plugs and some cheap speaker wire.
Later on if you save your pennies you can buy something like the dayton sub for about 100 bucks and will fit nicely with that setup.
Those look like 2mm straight plugs to me, not bannana plugs, which are:
http://www.amazon.com/Monoprice-109436-High-Quality-Copper-Speaker/dp/B0097JLQVC
Banana plugs have spring fittings on them. Electrode plugs don't. Easy mistake to make.
All the carbon, Amrex and TENS electrodes I have seen use straight plugs.
Unfortunately £100 is just around the lower limit of the very-entry level, not really mid-range if we're going to be honest.
The easy solution is M-audio AV-40s. They are 'powered monitors' so the amplifier is inside, all you have to do is feed them signal.
Alternatively, you could go for "passive" bookshelf loudspeakers and an amplifier. The advantage to this route is that you can upgrade the speakers or amp separately (edit: also each individual component is probably at least a bit better than the av40s, and if anything ever fails it can be replaced separately; it's just more flexible overall). There's some extra work involved but it's not difficult..
These Wharfedale 9.0 should be good for the price (the Diamond 9.1 were reviewed by Stereophile and they measure well for the price).
You'll need an amp, speaker wire, and some banana plugs are helpful. Oh, and probably a 3.5mm stereo to 2RCA cable to connect your 3.5mm source(s) to the amp.
How much better are either of these compared to tiny computer speakers like Logitech or Creative etc.? Much better.
Hey Guys, I'm trying to create a some-what cheap and MODERN set up for myself with multiple use (but limited channels in the receiver, so I found a receiver with Bluetooth option) and high convenience... Am I missing anything? Or is there anything I should add?
Cheap Bluetooth w/ Limited Channels Receiver
Turntable, and I really love this one.... Really Jacks Up Price
Speakers that come with wire, but adding a spool from amazon anyways...
Wire and Plugs
Do I need anything else? Hi-Fi amp or something? The turntable comes with a phono-preamp and the speakers look decent and are at my price range. Any tips on how to set this up as well? Including the best way to use the plugs or if I should get different plugs.
With the current prices of this post, the overall price is... $462.88 USD and W/O the turntable, it is $213.88 XD
Replacement Turntable that is affordable which puts the new price at $298.88
To start you need an integrated amplifier. Here's the one recommended in the purchase help thread. This unit will provide power to the speakers so they can play back audio.
Next you need a cable that runs from your phone's headphone jack (assuming it has one) to the amp. Here you go.
Now you need to connect the amp to the speakers. Since you have a sub, you will run speaker cable from the amp to the sub, and then from the sub to each of the speakers. Here's 50 ft of speaker cable which should be more than enough to get the job done. You'll also need a wire stripper tool to remove the casing at each of the cabling, here you go. Would also recommend some banana plugs to make things easier but they aren't required.
This gets you live audio to your speakers. Had you done some research ahead of time you probably would have landed on buying active speakers instead, which would have saved you the need for all of this equipment except the $7 audio cable.
I'm running from my LP-120 to my preamp into the receiver. Then the speakers into the receiver.
My main problem is where the wire goes. Do I put the wire directly into the the red/black terminals and then screw those down? Or do I need something like this to put the wire in before I plug it into the speaker/receiver?
Sorry for all the questions, I just want to get it right. Thanks for your help so far.
Hmm.. here are the plugs: Monoprice 24k Gold Plated Speaker Banana Plugs, Closed Screw Type (5 Pairs) https://www.amazon.com/dp/B0097JLQVC/ref=cm_sw_r_cp_apip_86k8QtboC1QsA
And here is my wire: C&E 100 Feet 14AWG Enhanced Loud Oxygen-Free Copper Speaker Wire Cable, CNE62761 https://www.amazon.com/dp/B009EADB2Q/ref=cm_sw_r_cp_apip_Sy9NGh8nFOROC
Do I have to fan it out so it's really spread out ? Like no wires bunched together ?
I'm assuming, based on your other responses (and because you haven't specified) that you're hooking this up to a computer exclusively, and that you have limited desk space (meaning that standard bookshelf speakers won't fit). Also, I'm going to assume that you don't have SPDIF or optical connections, since you haven't said that you do.
My suggestion, then, would be:
At their price and size, the Miccas are great speakers.
The Nobsound was reviewed by Zeos a while back, and he was pleasantly surprised. Note that you can attach the amp to your computer using USB, the 3.5mm jack, or bluetooth.
The speaker wire is there just to remind you to factor that into your cost. You may already have some laying around, or you can probably find some cheaper than that, or in shorter lengths.
Optional:
for example: https://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y/ref=mp_s_a_1_3?ie=UTF8&qid=1550053284&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=speaker+wire&dpPl=1&dpID=51nHodxMogL&ref=plSrch
you usually clamp them underneath those red/black caps. however, i’m seeing holes there so with some extra effort you could use these too.
https://www.amazon.com/Monoprice-109436-Plated-Speaker-Banana/dp/B0097JLQVC/ref=mp_s_a_1_3?ie=UTF8&qid=1550053390&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=speaker+wire+banana+plug&dpPl=1&dpID=41FhV2Rcd6L&ref=plSrch
you clamp the cable into these plugs and then plug them into your speaker. looks very nice imo
Hey! I just realised that I'm an idiot. How do I connect the speakers to the amp? Would 12 gauge speaker wire with these as connectors work? I've never seen em before.
Help:
For the Infinity R253s (2x), I need 8 banana plugs (2x of this item). Also 14G wire in your link, according to Crutchfield since these are 6ohm speakers?
Okay I bought one of these below. So I should buy one more, correct?
https://www.amazon.ca/Monoprice-109436-Plated-Speaker-Banana/dp/B0097JLQVC/ref=sr_1_4?keywords=banana+plugs+monoprice&qid=1558463443&s=gateway&sr=8-4
Also, Should I get a crimping tool for the wires? Never done this before so need some help.
Thank you.
Speaker wire for the speakers, digital coaxial or subwoofer cables for the sub.
It looks like binding posts for banana plugs for the speaker connections on the wall plate.
Amazon and monoprice are good places for speaker wire as well.
Banana plugs -5 pairs
Subwoofer Cable -8ft. There are plenty out there for cheap. Just search subwoofer cable.
50ft 14 GA speakerwire. The speaker wire connects to the bananaplugs.
They usually don't include the wire for connecting them, you just need some speaker wire. You can also get banana plugs to make plugging the wire in easier but that's optional
Just as an example, these are a type of banana plugs you can buy on Amazon. You can buy cheaper plastic plugs for sure, but I think for a radio of this build calibre, gold plated plugs would look the part. As /u/VE6LK mentioned, you would cut off the plug from the crystal earpiece and wire banana plug to each of the wires from the earpiece.
Alternatively, if you really are uncomfortable with stripping and connecting wires, you might look at an adapter like this one on Amazon. The only problem that may surface is that this adapter uses the standard spacing of 3/4 inch between the plugs, so you need to make sure that your father's radio is at the same spacing. You would also need a 1/4 inch to 1/8 inch reducer for this adapter to reduce it down to the size of your crystal earpiece plug.
I'm still looking for a better option for the pre-made cable - If I find something better I'll edit this comment.
Ok m8, so after researching more, looks like MB42X is one of the best one out there and the bad review is from people who don't have subwoofer and they expect lower frequency from this speaker since I'm already going to get a Dayton 1000 sub, I believe MB42X is going to perfect for me. especially reviews say it performs really good on mid-range which is important for me since I watch a lot of movies. so here is my final list, can you tell me if I'm missing something like if the banana plug is correct (and how many of them I need?), and do I need the cable (no cable comes with the speaker?) and check for the AMP if it's good enough.
Banana plugs?
https://www.amazon.com/Monoprice-Plated-Speaker-Banana-Closed/dp/B0097JLQVC/ref=sr_1_3?s=electronics&ie=UTF8&qid=1511706062&sr=1-3&keywords=banana+plugs