Reddit Reddit reviews Movo MC3 3.5mm TRS to TRRS Adapter - Microphone Adapter for iPhone and Android Smartphones and Tablets

We found 11 Reddit comments about Movo MC3 3.5mm TRS to TRRS Adapter - Microphone Adapter for iPhone and Android Smartphones and Tablets. Here are the top ones, ranked by their Reddit score.

Musical Instruments
Stage & Studio Cables
Microphone Cables
Stage & Sound Equipment
Movo MC3 3.5mm TRS to TRRS Adapter - Microphone Adapter for iPhone and Android Smartphones and Tablets
MUST HAVE ADAPTER: Most microphones don't work out of the box with smartphones and tablets. This adapter solves that problemCOMPATIBILITY: Connect wireless microphones, lavalier microphone, and any other microphone to your iPhone or Android smartphone or tablet1-YEAR WARRANTY: We’ve got your back. Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to helpTRANSFORM YOUR AUDIO: Built-in audio just doesn't cut it. Improve your vlogs, live streams, and more by capturing high-quality from an external battery-powered microphonePRO TIP: When using this adapter, be sure to unplug it before listening to the playback. If you don't, you will not hear anything
Check price on Amazon

11 Reddit comments about Movo MC3 3.5mm TRS to TRRS Adapter - Microphone Adapter for iPhone and Android Smartphones and Tablets:

u/zakkuree · 3 pointsr/PS4

I purchased an FX Audio DAC-X6 a couple years ago based on this review. It's a good value pick and has been great with my Beyerdynamic DT 770 80 ohm headphones. It has an optical input that I use with my PS4 and a USB input for my PC with a switch to toggle between the inputs. If you don't get this one, just make sure you find a DAC/amp with optical input.

As for your microphone, most budget DAC/amps don't have an audio input or relay so you still need to run your mic into the controller, or get a USB microphone adapter. I got this TRS/TRRS adapter and plug the boom mic attached to my headphones into it.

TL;DR

Headphones > FX Audio DAC-X6 \> PS4 optical out

Microphone > TRS/TRRS adapter \> PS4 controller headphone jack

EDIT: or you could just get this: https://us.creative.com/p/sound-blaster/sound-blasterx-g5

u/2old2care · 3 pointsr/audio

This cable should work for your MacBook Pro. The Mac laptops use the same headphone/microphone connections as the iPhone. The microphone input is normally for the mic that's part of the EarBuds that are supplied with the iPhone.

Hope this helps.

u/RC531976 · 2 pointsr/audio

Maybe. But.....

  1. We don't know whether the microphone needs "plug-in-power" as typical for a condenser mic.

  2. Nobody seems to make a simple 6.3mm to 3.5mm adapter that would be appropriate for this connection. The Apple iPhone uses the "CTIA" pinout where the mic sgnal is connected to Sleeve, and the ground is connected to the second Ring.

    Idealy you could just connect these to the 6.3mm jack straight across. But I can't see anyone selling this simple adapter. Perhaps because few people have a need for such a thing? Or perhaps because it doesn't work (for whatever reason)? Maybe that is why vendors like IK can sell their iRig2 for a rather premium price.

    You could try something like this, but I would get from some place that allows you to return it if it doesn't work.

    https://www.amazon.com/Movo-MC3-Microphone-Adapter-Smartphones/dp/B01N9CJDVE
u/Schaufensterpuppe · 2 pointsr/pixel_phones

Hey! Not sure if you found an answer to this yet, but I've been researching this recently as I want to use a better mic to record my bands' practices.

​

From what I found, you need some type of small sound card, or a TRS to TRRS converter with a 3.5mm to USB C adapter. Phones can take mic input, but by default, they won't recognize that it's an input signal. The options I listed should force the phone to recognize the mic input.

​

I am still waiting on mine in the mail to test it out, but I would guess the TRS converter method will produce higher quality audio since it wouldn't be running through a $7 sound card.

u/12GaugeSavior · 2 pointsr/ipadmusic

Hey, just wanted to follow up on this. I got this working using a standard stereo aux cable and a TRS Female to TRRS Male adapter. I got mine at a local shop, but I'm pretty certain this is the exact same one. though I only paid $5 for mine.

So, yes, the iPad Mini 2 has a mic input in the headphone jack (TRRS), you just need to convert the signal from TRS to TRRS.

Thanks for everyone's help, I might still pick up one of these iRig adapters, but this is the smallest and cheapest I can find.

u/Yrone1225 · 2 pointsr/volcas

I got this one. Works great 👍

It just takes a regular 3.5mm trs (Tip ring sleeve) cable like everything usually uses and it converts it to 3.5mm trrs (tip ring ring sleeve) which some devices like iPads and iPhones and tablets and such need in order to know that it’s an incoming signal and to be able to record instead of like when you plug in a pair of headphones for example, which the phone senses as outgoing and will then push audio.

Movo MC3 3.5mm TRS (Female) Microphone Adapter Cable to TRRS (Male) for iPhone and Android Smartphones https://www.amazon.com/dp/B01N9CJDVE/ref=cm_sw_r_cp_api_i_-X3tDbRJ8HNW7

It’s worth the investment. I use mine al the time for quick recording sessions for music ideas. Sound quality is much better than the built in mic on the phone. Do some reading, it’s fun to learn. It’ll definitely do you good and if you need better quality you can get into different interfaces and stuff. It’s not difficult to learn, it’s just a lot of little things,
just take it in pieces and have fun with it 🙂

u/ElijahLynn · 1 pointr/GooglePixel

I used the USB-C adapter on the Pixel 2 with a Rode Video Mic (not the VideoMicro, the bigger one) WITH a TRRS adapter. That adapter broke so I just ordered https://www.amazon.com/Movo-MC3-Microphone-Adapter-Smartphones/dp/B01N9CJDVE/ which looks like it should do the job. The Google Camera on the Pixel 2 does recognize the external Rode mic with the TRRS adapter plugged into the USB-C adapter, it shows as "external mic" on the interface where you can select it or the internal mic.

u/Heygreggie · 1 pointr/podcasting

Thanks for this!. I just actually contacted Zoom directly (have a contact) and figured out that I can use a Rode SC4 (or similar) into my smartphone, and then a 3.5mm male to make into the H6 to get the audio from the H6 to play through smartphone. I purchased these two products.... Should these do the trick?:


Movo MC3 3.5mm TRS (Female) Microphone Adapter Cable to TRRS (Male) for iPhone & Android Smartphones https://www.amazon.com/dp/B01N9CJDVE/ref=cm_sw_r_cp_api_i_8nh3Cb2W23310

DuKabel Top Series Long Audio Cable 26 Feet (8 Meters) - Shielded Aux Cable Cord 3.5mm Male to Male Stereo Auxiliary Cable Cord/Crystal-Nylon Braided / 24K Gold Plated / 99.99% 4N OFC Conductor https://www.amazon.com/dp/B07PHSR9T2/ref=cm_sw_r_cp_api_i_Doh3CbF8FZ03H

u/Dimethyltrip_to_mars · 1 pointr/lgv30

Yeah you want to buy a trs to trrs adapter.

Regular headphone jacks used on stereos, all music equipment that predates smartphones, are TRS cables.


The smartphone era invention of a headphone cable that also includes a functioning mic is TRRS.

You want to get one of these bad boys

https://www.amazon.com/Movo-MC3-Microphone-Adapter-Smartphones/dp/B01N9CJDVE/ref=mp_s_a_1_1?ie=UTF8&qid=1549229375&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=trs+to+trrs+adapter&psc=1

u/tripsicks · 1 pointr/Beatmatch

Pioneer DJM-REC app, will record from headphone jack if the correct TRRS cord is used.

I’ve used this one Movo MC3 3.5mm TRS (Female) Microphone Adapter Cable to TRRS (Male) for iPhone & Android Smartphones https://www.amazon.com/dp/B01N9CJDVE/ref=cm_sw_r_cp_api_i_cZwCCbFC2DFGS

u/wallefan01 · 1 pointr/techsupport

Oh, you'll want one of these or something similar.

Headsets and combo ports (TRRS jacks - Tip Ring Ring Sleeve) have four sort of...segments on the connector for left headphone, right headphone, mic, and ground. Headsets without microphones use a TRS (tip ring sleeve) with 3 segments, which, as you probably know, omits the microphone and is just left, right, and ground. A TRS (3-pin) plug in a TRRS (4-pin) jack appears as left, right, ground and ground (so the mic pin is connected to ground, indicating to the computer that there is no mic).

Unfortunately, 3.5mm microphones also use a TRS plug, with the 3 segments being left mic, right mic and ground (although most mics connect the same actual microphone to both the left and right channels). As I mentioned, plugging a TRS plug into a TRRS jack lines up with the headphone outputs (left headphone, right headphone, and ground) and leaves the microphone pin connected to ground, so the computer sees (mic, mic, ground, ground). The computer isn't smart enough to know that there's a microphone connected, and assumes that anything plugged into that port must be (left headphone, right headphone, mic, ground), and since the mic is connected to ground, this must be a headset without a microphone (ironic, isn't it?). This means that, yes, it thinks your microphone is a pair of headphones and it's trying to play sound through it.

The adapter I mentioned takes a (mic, mic, ground) at one end, and puts a (no connect, no connect, mic, ground) at the other. In other words, the computer sees a headset with microphone. Unfortunately, it will attempt to play sound through this headset, and since the left and right headphone pins are left unconnected, this sound will go nowhere.

If you can't convince Windows to force output to the speakers when there are headphones plugged in (some laptops can do this, but some can't), use this instead of the adapter mentioned above. This adapter takes a TRRS (left, right, mic, ground) at one end and splits it to two TRS jacks at the other, one (mic, mic, ground) for the microphone, and one (left, right, ground) for a pair of headphones.