Reddit reviews MUJI Makeup Facial Soft Cut Cotton Unbleached 60x50 mm 140pcs
We found 18 Reddit comments about MUJI Makeup Facial Soft Cut Cotton Unbleached 60x50 mm 140pcs. Here are the top ones, ranked by their Reddit score.
MUJI Makeup Facial Soft Cut Cotton Unbleached 60x50 mm 140pcs
You need:
You can buy these items separately (for cheap via Fasttech, or domestically), or, if you don't mind the markup, in DIY kits (like this Coil Master kit).
Rebuilding isn't that hard, and it's so much cheaper than buying coil heads. There are tons of Youtube tutorials (or written ones) to help you get into it. Building and wicking RTA's is a tiny bit trickier than building RDA's because of the size of the build deck and potential leaking issues, but that shouldn't discourage you.
I can't recommend the Aromamizer, because I don't have one, but in my opinion a tank with a velocity style deck is a good idea. You can get an RBA deck for the TFV4, too.
Edit: Steam Engine is extremely useful.
This is Muji Japanese Cotton from Japan. This has very minimal flavor, and if you have a decent strength-flavored juice, then there is not a worry. This is 140 pads. You can obviously cut them, which i do, and can get up to 8 rewicks on dual coils (depending on how big the coils are). I love it and will NEVER go back to cotton bacon for anything but scottish or stovetop wicking. It is awesome. The only 2 drawbacks are that it comes from Japan and that the labeling is all in japanese. IMO, TOTALLY FKN WORTH IT!!!!!
I have tried the Koh Gen Do and Puff and they are very similar, but this is such a good product and a good deal for what you get that it is so worth it.
Also, I run my daily at about 80-100 watts and you can go 2-3 days b4 rewicking, but i do it every day to change harsher flavors. Had them since beginning of February and have barely made a dent. Love it!
http://www.amazon.com/MUJI-Makeup-Facial-Cotton-Unbleached/dp/B00MYXSRAQ?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00
Use unbleached organic cotton, usually people go for the pads as they're easy to roll up and trim.
http://www.amazon.com/gp/product/B00MYXSRAQ?keywords=japanese%20cotton&qid=1450707954&ref_=sr_1_5&sr=8-5
That pack will last you a long time.
In terms of coils, your device caps out at 50 watts, so I wouldn't advise anything thicker than 26 gauge wire when you're making your own coils. Anything lower might take a long time to heat up with the power you have available. Make sure when you're building that you use an ohm reader to ensure you say in a safe resistance range. At 50 watts you should be able to get a nice vape out of a 6 wrap 26g dual coil. Watch a few tutorials on youtube, especially if you have a specific RDA/RTA you're looking to build with.
Also WATCH THIS VIDEO before you do ANYTHING.
https://www.youtube.com/watch?v=O3h0ta-L_zc
These ones? They don't peel into layers really at all – if you try to break them apart they break apart similarly to a cotton ball. They are incredibly soft though and great for removing eye makeup and nail polish.
If you don't even know what the coils are made of, chances are you haven't been brought up to speed on coil resistance and battery safety. You don't mention what kind of mod you're using, but if it's a mech, get a vape shop to help you figure things out before you blow your face off.
That said, here are some things you will need eventually:
http://www.amazon.com/gp/aw/d/B00MYXSRAQ/ref=mp_s_a_1_1?qid=1422326459&sr=8-1
Muji Japanese cotton that I use and bought from amazon. I would ditch the tweezers and pick a pair up at the drug store. You can also get lightingvapes kanthal and nitecore charger from amazon if you want bundle it all up and save on shipping.
This is the one pictured. There's an even bigger bag for only a dollar more but I cheaped out. Don't expect tracking with your order because it's coming directly from Japan in a sketchy looking package but it's well worth it.
I bought a bag of this recently and it's amazing. I have no break in period and the flavor is amazing. If you search you can find it under $10 on amazon. I have also used Koh Gen Do cotton. It had a day or two break in time, but was great after that.
Between the two I prefer the MUJI, for the lack of a break in period and it roles great with the scottish role method.
With those attys. Just grab some nichrome or stainless steel. 24 gauge wire is perfect for this use.
For these atomizers, use a 3mm post to wrap your coils and do 6 to 8 wraps. 20-35 watts will be perfect and you'll have yourself plenty of vapor and lots of flavor.
Go to lightning vapes website for wire.
You can get unbleached Japanese cotton for cheap here
https://smile.amazon.com/gp/aw/d/B00MYXSRAQ/ref=mp_s_a_1_5_a_it?ie=UTF8&qid=1503808475&sr=8-5&keywords=muji+cotton
Most other cotton brands that are for vaping are too expensive and don't really offer anything special.
You may want a coil jig or something like that ... Search around for kits. Some people are against coil kits but I love mine and I think it's one of the best investments I've made in regards to vape gear.
Something like this would be fine
https://smile.amazon.com/gp/aw/d/B01LT0KAEU/ref=mp_s_a_1_8?ie=UTF8&qid=1503808561&sr=8-8&pi=AC_SX236_SY340_FMwebp_QL65&keywords=coil+master&dpPl=1&dpID=51D8-aXSbML&ref=plSrch
http://www.amazon.com/gp/product/B00MYXSRAQ
Just ordered some Muji and some basic organic balls from Amazon. I like both for different builds. Muji seems to keep the KFL wicked with high PG juice.
I’ve actually used un-bleached cotton pads, cut to fit the solo stem, then it absorbs your moon rock and won’t leak in to your stem:
MUJI Makeup Facial Soft Cut Cotton Unbleached 60x50 mm 140pcs https://www.amazon.com/dp/B00MYXSRAQ/ref=cm_sw_r_cp_api_i_INf1DbH3Q45EE
Or, as other users have said, you can sandwich it between herb, but I personally don’t like mixing the tastes of moon rocks/concentrate/herb. Best of luck.
Looks like exactly what you have:
https://www.amazon.de/Muji-696730289398-Wattepads-60x50/dp/B00MYXSRAQ/ref=sr_1_1?ie=UTF8&qid=1497967898&sr=8-1&keywords=muji+cotton
Or are the pictures your new bags?
> https://www.amazon.de/Muji-696730289398-Wattepads-60x50/dp/B00MYXSRAQ/ref=sr_1_1?ie=UTF8&qid=1497967898&sr=8-1&keywords=muji+cotton
I ordered a bag from amazon which had the older style packaging like in the picture you posted but the one that arrived had the new style (the one on the right). Which was the same stuff that arrived when I ordered directly from Muji.
/u/kasumiwave I would recommend getting the Limitless Plus RDTA. Dead simple to build on. Lots of space and a 7ml tank.
For wire, I get mine from wireandstuff.co.uk
Cotton - Amazon sells big bags of Muji / Jap stuff for about £6. My bag has lasted me about 2 years so far.
https://www.amazon.co.uk/Makeup-Facial-Cotton-Unbleached-140pcs/dp/B00MYXSRAQ/ref=sr_1_2_a_it?ie=UTF8&qid=1486473276&sr=8-2&keywords=muji+cotton
Top tip - Vaping cotton is exactly the same as the stuff above, but with a bigger price tag!
Obviously be wary when trying to side-step expensive gimmicks with vaping because sometimes expensive stuff is expensive for a reason but if you can source cheap stuff it feels good.
Cheap Jap Organic Cotton 1: https://www.amazon.co.uk/Cotton-Labo-Organic-Puff-200Pc/dp/B000TCD51A/ref=pd_bxgy_194_img_2?ie=UTF8&psc=1&refRID=6BZFJF81ME61QJDF62B2
Cheap Jap Organic Cotton 2: https://www.amazon.co.uk/gp/product/B00MYXSRAQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Cheap Kanthal 24gauge spool:
https://www.amazon.co.uk/Kanthal-A1-Type-Resistance-Wire/dp/B00UYR0JX2/ref=pd_bxgy_194_img_3?ie=UTF8&psc=1&refRID=6BZFJF81ME61QJDF62B2
First off, sorry, I'm on mobile.
Well, to get you started, the first thing you need to know is Ohms law. This will basically tell you the safe limits you can push a battery to. I wouldn't recommend a mechanical mod myself BUT it's always good to know. I would recommend a regulated mod so that you're relatively safe, at least at the start.
Unfortunately, to power big builds, you probably want a mod that does over 100W, even for some tanks like the TFV8, that's not much. The Smok R200 is a good choice and I used one for months and it was always reliable. The Temperature Control isn't the best but it works.
For an RDA, you want something with a deck that's easy to build on so something like the Mutation X V5 has a two post deck which is the easiest to build on. The side and top airflow means unless you drip too much liquid inside.
Batteries like the Samsung 25R are solid favourites so if you want to make sure you always have power, get 4 of them.
To charge the batteries, you probably only need a 2 bay charger. You'll always have 2 in the mod. Nitecore are probably the most popular. The Nitecore D2 will show you all the information you need to know about where they are up to with their charge, voltage, whatever.
To start with, rather than buying a full kit to build coils, you could try pre made coils. I started out with these pre-made Claptons and then when I knew I liked dripping, I bought this coil building kit and some kanthal wire.
To wick, you'll need cotton and this Muji cotton is kind of standard. Enough there to last for a very long time.
There are plenty of tutorials for how to wick on YouTube and the best method is probably the Scottish Roll. It's a good technique which lasts for a while. It will take you a lot of practice to get it right but it pays off.
That's a lot of typing so if there's anything else, just ask.
You want unbleached Cotton, preferably in pad form. something like this: https://www.amazon.de/Muji-696730289398-Wattepads-60x50/dp/B00MYXSRAQ/ref=sr_1_1?ie=UTF8&qid=1510579459&sr=8-1&keywords=muji+Cotton