Reddit Reddit reviews Nu-Calgon 4171-75 Evap Foam No Rinse Evaporator Coil Cleaner, 18 oz.

We found 8 Reddit comments about Nu-Calgon 4171-75 Evap Foam No Rinse Evaporator Coil Cleaner, 18 oz.. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
HVAC
Heaters & Heater Accessories
Building Supplies
Nu-Calgon 4171-75 Evap Foam No Rinse Evaporator Coil Cleaner, 18 oz.
Evap Foam will liquefy dirt, grease, oil, and other residues quickly and easilySince it is fortified with corrosion inhibitors, it is safe for use on metals and other materialsThe product’s fast-breaking foam is completely self-rinsingSpray Evap Foam on the coil and the foam will wash the emulsified matter offThe aerosol product is NSF registered for use as a coil cleaner in and around food processing areas, and helps leave the area deodorized with a pleasant lemon scent
Check price on Amazon

8 Reddit comments about Nu-Calgon 4171-75 Evap Foam No Rinse Evaporator Coil Cleaner, 18 oz.:

u/mehdbc · 7 pointsr/HVAC

Relocating the filter should be part of the job but also cleaning your coils should partially help fix the issue.

https://www.amazon.com/dp/B00DM8KQ3I/

Buy enough cans to get free shipping (if you don't have prime)

Get a dish brush spread evenly without bending the fins and then try removing the clumps before they clog your drain

u/Nakotadinzeo · 5 pointsr/LifeProTips

LED lightbulbs, Home Depot has some that are 2 for $5 that are plenty bright and dimmable.

Get some lamps too, put LED bulbs in em. All you really need most of the time is 1-2 lamps providing light instead of the overhead lights.

While it was an absolute nessesity for my apartment since it has a tiny water heater, a low flow shower head like this (and I actually had that one, i loved it but i got a room mate and they didn't) or at least a valve to kill the water when you're soaping up like this one. Saves hot water when others need to shower, as well as saving water in general.

A window shrink-wrap kit like this one can keep the cool air in in the summer and out in the winter.

While heading on the extreme side, if your door seals as crappily as mine does Magnetic weatherstripping will keep a nice seal around your door keeping the conditioned air inside and bugs outside.

Making sure to clean the lint trap after every use is important. If you own the drier, you could also remove the back panel (unplug it first!) and clean the whole duct.

putting some outlet insulation under your outside-facing wall plate-covers will help.

If you have central air, ask your landlord if the filter is your responsibility. If it is, make sure to replace it every 30-60 days. I would recommend a Filtrete filter, since I like being able to breathe when I wake up on a high-pollen day. If you have a terminal A/C unit make sure that you clean the filter well, using a little OxyClean to get it fully clean is a good idea. Some evaporator cleaner may be needed if the metal intake fins behind the filter are dirty.

If you do have a terminal system, it may also be worth it to use safer styles of space heater instead of the terminal's heat pump. The heat pump on mine is crap.

Asking your landlord to clean your drier's wet air outlet will prevent fires, decrease drying time, and save money.

That's all I can think of.

u/savagemick · 3 pointsr/HVAC

Actually, check the fins on the evaporator coil behind the filter once it thaws. If a lot of them aren't straight, or if they're dirty, that would do it. Even if they don't look dirty, they still could be. It wouldn't hurt to clean them either way. I like this one fit small units like that https://www.amazon.com/Nu-Calgon-417175-Nu-Calgon-Evap/dp/B00DM8KQ3I

u/kramithefrog · 3 pointsr/Cartalk

There is a specific product that you should use to avoid causing oxidation on the aluminum and copper.

Nu-Calgon 4171-75 Evap Foam No Rinse Evaporator Coil Cleaner, 18 oz. https://www.amazon.com/dp/B00DM8KQ3I/ref=cm_sw_r_cp_api_i_cLqlDbSPDS9KR

u/phoney_bologna · 2 pointsr/HVAC

Depends on your confidence level. Cleaning the furnace and reachable ductwork with a shop vac will save you money and is not very difficult.

Also, if your comfortable and careful, you can try getting some of this, Nu-Calgon Foam cleaner, follow the instructions, and carefully apply, while being very very carefull to not bend any of the fins.

But number one priority for you should be to measure your filter rack with a tape measure, and buy proper fitting filters. All of this can be avoided with just a little bit of routine maintenance.

u/Mortimer452 · 1 pointr/HomeImprovement

Is it a window AC, are you talking about the exterior or interior coil?

You can use a no-rinse cleaner like this on the interior coil, they're not as effective but still work pretty well. Just don't overdo it and be sure to run the AC for at least an hour or two after. The idea behind "no rinse" cleaners is to run the AC and let the condensation cycle rinse it for you.

u/Narwahl_Whisperer · 1 pointr/prius

Too much moisture in the AC evaporator coil box, it gets mildew in there.

​

If you turn the AC off and let the fan run fresh air for the last few minutes before you stop driving, it makes a big difference. This helps dry out the box that holds the evap coils.

​

You may need to start with a cleaning of the coils, and then make a habit out of letting it dry out to prevent it from getting funky again.

​

I had some of this stuff already, so I basically pulled the fan out and sprayed it into the box with the coils. Probably better to get toyota's refresher kit if you don't want to deal with that mess (it's a real PITA!). Alternately, you may find a way to attach a hose to the cleaner I linked and squirt it up the drain tube for the evaporator box.

u/KimberKisses · 1 pointr/hvacadvice

I think you are looking for something like this. https://www.amazon.com/dp/B00DM8KQ3I/ref=cm_sw_r_cp_apa_YbI0Bb3RN8WPX