Reddit Reddit reviews OBDLink MX Bluetooth OBD-II Automotive Scan Tool for Android and Windows

We found 18 Reddit comments about OBDLink MX Bluetooth OBD-II Automotive Scan Tool for Android and Windows. Here are the top ones, ranked by their Reddit score.

Automotive
Automotive Tools & Equipment
Code Readers & Scan Tools
Diagnostic, Test & Measurement Tools
OBDLink MX Bluetooth OBD-II Automotive Scan Tool for Android and Windows
Recommended by FORScan for Android (not compatible with iOS)Fast, reliable connection and automatic protocol switchingWorks with FORScan, Carista, Torque, DashCommand, AlfaOBD, BimmerCode and dozens of other appsTransform your Android device or Windows PC into a professional-grade diagnostic scan toolOver-voltage and battery drain protection, firmware updates
Check price on Amazon

18 Reddit comments about OBDLink MX Bluetooth OBD-II Automotive Scan Tool for Android and Windows:

u/Neothin87 · 3 pointsr/androidapps

this is the one I use:
http://www.amazon.com/ScanTool-426101-OBDLink-Bluetooth-Interface/dp/B006NZTZLQ

With additional bandwidth capabilities, it allows you to track multiple sensors without having it bog down. Also, the auto shutoff feature is pretty cool.

I use the torque app. the app is great, im just sad that BMW boost pressure sensor on non-diesels is capped at like 3 psi :(

u/chriskmee · 2 pointsr/Showerthoughts

I bought this dongle and the Torque Pro app. You have to enable the fast data stuff somewhere in the torque pro settings, can't remember where exactly. The dongle comes with its own free app which is ok, but Torque Pro is better.

u/DarkStarPDX · 2 pointsr/4x4

Here's the one I got: https://www.amazon.com/gp/product/B006NZTZLQ/

It's a great device for getting codes or other diagnostic info out of your vehicle. Various apps and things available (like Torque) to find out what is going on "under the hood."

u/mchnikola1 · 2 pointsr/Nexus7

Are you going to be hooking up an OBD2 logger to it as well?

e.g., http://www.amazon.com/gp/product/B006NZTZLQ/

Also, very nice build!

u/inheritthefire · 2 pointsr/personalfinance

OBDLink MX
I use this on a variety of cars, it has never let me down. Note that the bluetooth versions are not compatible with Apple devices. There is a Wi-Fi variant avaiable.

u/overzeetop · 1 pointr/f150

That was 1.5 years ago. OBDLink MX is what I bought. There are cheaper versions, but I'd just bought a $62k truck...$80 for the guaranteed-to-work bluetooth at the time didn't seem excessive.

Forscan was whatever was current, on my Windows tablet (Surface Pro 4) using a temporary/free license.

u/M34TST1Q · 1 pointr/volt

u/Faptain_Hand_Solo · 1 pointr/Nexus7

Here's the diagram I made up when I was doing the wiring
http://i.imgur.com/iTDrNh5.png

It wasn't too hard. I basically bought the plug for my car's existing wiring harness and wired the amp to that, used RCA cables to hook the amp (http://smile.amazon.com/gp/product/B00B43LKV0) up to the DAC (http://smile.amazon.com/gp/product/B000KW2YEI)

On the other side, I got this cable: http://smile.amazon.com/gp/product/B00MAJTTYC and cut off the male USB end, which I wired to a step-down (http://smile.amazon.com/gp/product/B00BWLP88A) on one side and the 12v switched power on the other side. Then I just plugged in the tablet to the micro USB and the DAC to the female USB.

I don't have any pictures of the piece of wood method, but basically, once I pulled out my old headunit, there was a hole in the dash. I stuck the amp and DAC into the hole and cut a piece of wood big enough to cover the hole with a hole through it for the power wire to pass through for the tablet. The tablet itself is sandwiched between that piece of wood and the plastic bevel of the dash with a bit of foam padding.

I'm not a hardware hacker, and had never done any car audio, and I had no problems figuring it out. (though I did kill my battery a couple tiems because I had the amp hooked up to the regular 12V line instead of the switched line, so it stayed on and drained the battery till I got that sorted)

I didn't bother with FM radio since I never listened to it anyway. I can't say I regret it, though I do wish that somewhere in there, I had an aux line so I could hook up a phone easily, but that's only so my wife could play stuff off of her iPhone.

Night driving is fine, but that might depend on your car. I just use the auto brightness, and I have a solid black background for the tablet, so if it's too bright, I can just minimize the app, though I don't usually have to do that. During the day, it's bright enough to see fine, but that may depend on your car layout.. in mine, there's no glare because the screen is vertical in the center of the dash.

Finally, I also have a blutooth OBD2 reader (http://smile.amazon.com/gp/product/B006NZTZLQ) hooked up which displays some gauges for stuff like MAF, RPMs, Gas usage, etc.

u/redditor21 · 1 pointr/CarHacking

ITs actually pretty easy. I have a 2012 chevy volt and you can trigger the remote start with this https://www.amazon.com/gp/product/B006NZTZLQ/ref=ox_sc_act_title_1?smid=A1C2436WDJ39HA&psc=1

  • an android app.

    It is possible to remote start a lot of new cars over OBD2 ASSUMING it has onstar module. Onstar doesnt need to be active, but the module needs to be there
u/tcpip4lyfe · 1 pointr/MechanicAdvice

I have this one:

http://www.amazon.com/gp/product/B006NZTZLQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


It's pricey but it updates very quickly which is good for diagnostic logging. Probably don't need anything that fancy if you're just looking to check codes.

u/BopnSlop · 1 pointr/Ford

I use this.

Here is a walk through on how to use forscan. It’s a great tool to use.

u/matrix20085 · 1 pointr/mazda

OBDLink MX Scan Tool
Arkon Windshield Mount(Works much better than I thought it would)
Ellipsis 8 Tablet

u/Tolann · 1 pointr/FocusST

I need this for my ST too. Is this the right scan tool or is there a better, more affordable one now? I found this in an older post.

OBDLink 426101 ScanTool MX Bluetooth: Professional Grade OBD-II Automotive Scan Tool for Windows and Android - DIY Car and Truck Data and Diagnostics https://www.amazon.com/dp/B006NZTZLQ/ref=cm_sw_r_cp_apa_i_gQItDbES1S7ET

u/ragingxtc · 1 pointr/mazda

I'd be nice to configure it to go directly to the Torque app, but unfortunately, I have not found a way to do that with the MeMOPad. It'd probably be possible if it were rooted, but I haven't found a root method for it yet.

For power, I usually just let it run off the battery, but I have an extendable USB cord that I can run up to the tablet if needed.

Here's the OBDLink MX scan tool.