Reddit reviews Official Creality 3D Ender 3 Ender 3 Pro Ender 5 Tempered Glass Upgraded Build Plate Printing Surface for Heated Bed 235x235mm
We found 14 Reddit comments about Official Creality 3D Ender 3 Ender 3 Pro Ender 5 Tempered Glass Upgraded Build Plate Printing Surface for Heated Bed 235x235mm. Here are the top ones, ranked by their Reddit score.
Experience Pro-hesion- Our state of the art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand.This new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clipsAs the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.This size is perfectly suitable for the Ender-3This is the official Creality 3D store. All products have been tested extensively with all Creality brand products to insure increases in quality and no sacrifice in safety or performance.
Add tape or glue to the smooth surface of the glass for adhesion, yes, but if you get https://www.amazon.com/Official-Creality-3D-Tempered-235x235x3mm/dp/B07F16WPR5 you won't have to use tape or glue at all.
It's this one. Got it myself.
https://www.amazon.com/Official-Creality-3D-Tempered-235x235x3mm/dp/B07F16WPR5
I had to print at 13mm's for the first layer (or 2-3 layers depending on size) to get prints to stick.
Link: Official Creality 3D Ender 3... https://www.amazon.com/dp/B07F16WPR5
There is This glass bed with a coating on to that helps stuff to stick. I have it worked for a bit but after about a month stuff would not stick and I started to use hairspray to keep stuff stuck and its working great now. Here it is on amazon as well
I got this one. I started with a glue stick but found out just washing soap and warm water provides great adhesion. I did increase bed temp to 70 from 60 also.
https://www.amazon.com/Official-Creality-3D-Tempered-235x235x3mm/dp/B07F16WPR5?ref_=bl_dp_s_mw_17936569011
Just to be clear, we're talking about this one, no?
Damn, then I definitely got the wrong bed -I bought a borosilicate glass plate and some glue sticks. I saw that bed on Amazon, but the description implied it only worked on ABS. Too bad, I liked the idea of the Build Tak, and now I'm not really in the mood to buy yet another bed and re-level it again.
But my laziness may win out in a week or so, so who knows.
I'm pretty new to this too, I bought my Ender 3 Pro around the same time as you. Quiet printing is pretty high on my list as well as being able to print high-temp exotic filaments in the long term while maintaining reliability.
First upgrades I purchased were stiffer bed springs so I would be less likely to throw the bed out of level while removing prints or working around the printer and Capricorn XS tube since it has a more consistent internal diameter, fits closer to the filament, and can work with slightly higher temps. I also picked up a pack of bowden couplers recently as I noticed the end nearest the extruder is sliding past the coupler jaws on de/retraction; don't worry about that unless it's an issue for you. That's about $30 alone since I don't have a supply shop locally and have to order those parts in bulk. I had a Pi 3B laying around unused and flashed Octoprint onto it. Highly recommended. I have a replacement Noctua hotend fan, buck converters, and 5015 blower on order to quiet the fan noise; about $32. Just replaced the Meanwell psu fan with a 60x25mm Noctua I had lying around (Note: there may be better options in the 92-120mm range to replace part of the PSU housing, but that's what I had laying around). Next upgrade coming is the SKR Mini E3 with TMC 2209 drivers ($28) to eliminate almost all of the stepper noise. Also looking into a replacement for the control board fan and some vibration isolating feet for the frame. As far as higher temp printing I haven't made a lot of progress aside from buying a titanium all-metal heat brake ($11) winch I have yet to install or inspect, and looking into enclosure and electronics relocation avenues.
Either way the mods I purchased came in at around $100 US which should quiet the printer and help with reliability. Also looking into picking up a good M3-M4 bolt kit if any exist in the US.
Here are some links to the things I picked up and will, which may be helpful if you're in the US. Mostly from Amazon.
Type | Name | Link | Price
---|---|----|----
Reliability | 8mm x 20mm yellow springs | Link | $6.98
Reliability | Capricorn XS Tubing | Link | $11.49
Reliability | PC4-M6 / PC4-M10 Pneumatic Bowden Fittings | Link | $11.99
Silence | Noctua 40mm x 10mm 3-pin fan | Link | $13.95
Silence/Various | LM2596 Adjustable Buck Converters | Link | $10.95
Silence | 24v 5015 Radial Ball Bearing Fans | Link | $7.19
Silence/Various | SKR Mini E3 w/ TMC 2209 drivers | Link | $28.81
High Temp | Titanium All-Metal Heat Brake | Link | $11.52
TOTAL: $102.88 US + Tax
Parts already purchased/ bought with printer
Type | Name | Link | Price
---|---|----|----
Reliability/High Temp | OEM Ender 3 Glass Bed | Link | $20
Reliability | Feeler Guage Set | Link | $5
Reliability | 608zz Bearings, using with this(My Remix), this, and this, though I like this design a bit better | Link | $5.98
QoL Improvement | Raspberry Pi 3B w/ Octoprint | Link | $34.46
Silence | Noctua 60mm x 25mm 3-pin fan, goes with this mod | Link | $14.95
TOTAL: $80.39 US + Tax
Future planned upgrades
Official Creality 3D Ender 3... https://www.amazon.com/dp/B07F16WPR5?ref=ppx_pop_mob_ap_share
The stock bed is known to warp sometimes. Ever since I got the glass bed for mine it's been amazing. https://www.amazon.com/gp/product/B07F16WPR5/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Amazon's where I got mine...
I am confused by this issue, so many people seem to be using all kinds of different adhesives on the glass, I use none at all. Ender 3 with https://www.amazon.com/gp/product/B07F16WPR5/ref=ppx_yo_dt_b_asin_title_o03_s02?ie=UTF8&psc=1 glass bed, and mp select mini v2 with a random piece of glass and a piece of borosilicate, I've never had a problem with sticking, bed temps of all sorts. I wonder if this could be a climate type issue, I live in Fort Collins Colorado, it is fairly dry here and not to hot or cold, what type of climate are you guys printing in?
Watch this video to help with assembly. The included instructions are full of engrish and hard to follow. This guy makes it easy, and adds some handy tips. If you're not replacing the bowden tube immediately (you don't need to, but it's a cheap and relatively easy upgrade), skip the steps in his video where he removes the tube and its couplers.
Read this comment for my advice on how to level the bed. Leveling is a misnomer - you don't want it level compared to gravity, but compared to the gantry. The usual advice involves sliding a piece of paper under the nozzle as a feeler gauge. That'll get you close - the steps in my comment will get you just about perfect.
Once you've done that, this fan shroud is one of the few things I'd call an essential upgrade. Also a glass bed.
Yep. Just the standard Creality bed.
Official Creality 3D Ender 3 Ender 3 Pro Ender 5 Tempered Glass Upgraded Build Plate Printing Surface for Heated Bed 235x235mm https://www.amazon.com/dp/B07F16WPR5/ref=cm_sw_r_cp_apa_i_35VBDbA6SHFZB
Go glass.
PLA sticks with nothing for prep, smooth bottom surface, and very, very flat.
(edit) - with the upgraded yellow springs, I don't even need to level anymore - except when I change tips.