Reddit Reddit reviews Olympia Tools 9-Pound Cast Iron Hobby Anvil 38-789

We found 9 Reddit comments about Olympia Tools 9-Pound Cast Iron Hobby Anvil 38-789. Here are the top ones, ranked by their Reddit score.

Industrial & Scientific
Industrial Materials
Metal & Alloy Raw Materials
Iron Metal Raw Materials
Olympia Tools 9-Pound Cast Iron Hobby Anvil 38-789
CAST IRON ANVIL: Hammer and form any metal work piece with this 9-pound anvil featuring a graded cast iron body with polished surface and log shaped horn. It's the perfect size for hobbyists.ERGONOMIC DESIGN: This solid and durable cast iron anvil features secure holes on all four sides of its base, enabling you to mount it firmly to your workspace for safe use. Anvil Face: 5-1/2” X 2”. Horn Length: 3-1/2”MADE TO LAST: Our durable and long-lasting tools help you with home, garage & industrial projects. With professional-grade quality, easily repair & fix issues with our tool cabinet essentials.THE RIGHT TOOL FOR THE JOB: We engineer a range of bolt cutters, clamps, chisels, folding carts, hammers, pliers, saws, screwdrivers, tape measures, utility knives, vises, bolt cutters, saws & wrenches.SUPERIOR INSTRUMENTS: Olympia Tools provides quality & innovative hand & specialty tools, tool accessories & outdoor equipment for construction, woodworking, mechanical maintenance & home repair.
Check price on Amazon

9 Reddit comments about Olympia Tools 9-Pound Cast Iron Hobby Anvil 38-789:

u/jook11 · 4 pointsr/LearnUselessTalents

Okay, maybe not quite that small. This one Might not be bad though.

u/QnickQnick · 4 pointsr/Silverbugs

http://www.amazon.com/gp/aw/d/B003ES5T9C/ref=mp_s_a_1_1?qid=1421831858&sr=8-1&dpPl=1&dpID=41FJmWTK50L&ref=plSrch&pi=AC_SX200_QL40

That should get ya to it, sorry for the messy link I'm on mobile.

It has a weird enamel coat that chips off easily so the horn in the front isn't too useful, but $20 shipped for a 9lb anvil is too good to pass up.

u/Username1906 · 3 pointsr/UnearthedArcana

>I change it to a “bench anvil”, which is basically a smaller anvil that weighs ~30 pounds, meant to be used one a table to support lighter work.

Which is what I attempted to do here. Any sort of flat steel or cast iron surface can qualify as an anvil in a pinch, even a simple block of steel. Immunity to malleability is the primary goal, because then it can act as a suitable working surface.

I understand why it'd be strange to have a standard sized anvil, and I agree, but I also imagined a smaller, portable sized anvil.

Here is an example of what I had in mind: https://www.amazon.com/Olympia-Tools-38-789-Hobby-Anvil/dp/B003ES5T9C

It may have the same drawbacks as you mentioned, as it is smaller for the sake of portability, but I personally think it fits with the tool kit.

u/GuardedDig2 · 2 pointsr/ArtisanVideos

Olympia Tools 38-789 9 Lb. Hobby Anvil, Cast Iron https://www.amazon.com/dp/B003ES5T9C/ref=cm_sw_r_cp_api_i_ZMVEDbZDCADG2 ;)

u/Gungyver · 1 pointr/blacksmithing

you could always take a rotary tool, a pointed diamond bit, a ruler and a gold,silver or bronze sharpie (if your i beam is dark in color if its somewhat shiny you can just use a normal black sharpie) and make that drilled round hole into a square one.

for a horn a i just thought up a mod for a I-beam anvil. what you will need, get a good thick piece of round stock (a axle or thick spring from a car would work as its good high carbon steel), a blowtorch head, a small bottle of MAP gas, and if you do not have it a angle grinder with a proper abrasive disk for grinding and a cut off head.

First Grind the round stock into a proper tapered horn leaving a bit of a original materials size on the back end. Next switch to the cutting disk and cut off a appropriate amount of the middle section of the I beam off. Next using the Map gas get top of the beam to a nice orange color,(it will take some time) take your hammer and hammer it to a 90 dgree angle. let it cool fully. then drill a hole into it the size of the horn. now the extra material should stop it from falling out and also serves to hold it in place for the next step. Next reheat the section back to orange and hammer down on it to hot form the extended piece to the horn. you may need to do some hardening to and tempering at the end to make sure it will not brake under the strain of working it.


Keep in mind I have not tried this out as I came up with it as I was writing it. I just use a Vise anvil hybrid and use the face of the vice as a shaping horn. However i am a Hobby bladesmith not a blacksmith.

Or you could shell out 15.05 for this Or you could ju st buy this https://smile.amazon.com/gp/product/B003ES5T9C/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 and mod the horn to your liking.
and just grind down the horn. i use this one, however i kinda need to buy new nuts and bolts for it as I lost 2 well moving it to install the vise anvil hybrid i am now using.

u/Laughing_Loudz · 1 pointr/FidgetSpinners

kataderple is right, thats what I did. Here is what I used for a hammer
https://smile.amazon.com/gp/product/B001BHGC6M/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Also used this anvil
https://smile.amazon.com/gp/product/B003ES5T9C/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

First time doing it and I just randomly hammered away sometimes hitting harder but mostly just using the required amount of force to make the dimples.

u/nedonedonedo · 1 pointr/mallninjashit

they have anvils too

https://www.amazon.com/Olympia-Tools-38-789-Hobby-Anvil/dp/B003ES5T9C

I was hoping for a goldmine but it seems like it's just cheep tools