Reddit Reddit reviews Ontario 8627 Rat-5 Knife (Brown)

We found 10 Reddit comments about Ontario 8627 Rat-5 Knife (Brown). Here are the top ones, ranked by their Reddit score.

Sports & Outdoors
Hunting Equipment
Hunting Knives
Hunting & Fishing
Hunting & Tactical Knives & Tools
Sports & Fitness
Ontario 8627 Rat-5 Knife (Brown)
Made of 1095 Carbon SteelLock Type: Fixed; Edge Type: PlainOverall Length: 10.5-InchWeighs 11.5 ounces
Check price on Amazon

10 Reddit comments about Ontario 8627 Rat-5 Knife (Brown):

u/eltonnovs · 3 pointsr/knives

Kukris don't have to be that expensive if don't mind a 'modern' take on them.

Besides the Ontario and Condor /u/lowlife9 mentioned maybe consider Cold steel Royal Kukri or Ka-bar Kukri and compliment it with a Ontario Rat 7 or Rat 5, that's a pretty can-do-all combination..

u/TOUCHER_OF_SHEEP · 3 pointsr/EDC

It's definitely enough for a nice knife, though you might want to go a bit higher for a great knife. The KaBar BK2 is actually designed with things like batoning (hammering the knife through wood as a kind of faux hatchet using another piece of wood against the blade of the knife as the hammer itself) or chopping. It's a bit over $60, currently available for $69 to be precise, but as long as you don't flat out abuse it (prying heavy things, for example) it'll serve you well and quite possibly for the rest of your natural life.

At a lower price, you can get the Condor Bushlore, which at $35 is a perfectly valid choice that will serve you well indeed.

For an even lower price yet, the Mora Heavy Companion is from one of those few cheaper knife companies that does incredible work. I wouldn't baton with it, honestly, but even if you did it'd probably hold up just fine.

At a more expensive range, the Ontario Rat-5 is an amazing bushcraft knife. The Fallkniven Pilot Survival Knife is also an amazing knife. The Benchmade Bone Collector is spectacular knife made in D2 tool steel, one of the better steels available at that price. Another amazing knife is the Spyderco Bushcraft made in O1 tool steel. Finally, the Benchmade 162 is a pretty amazing knife.

One thing you'll notice about all of these knives with the exception of the Pilot Survival knife and the BM 162 is that they're all carbon steel knives. Carbon steel is a lot tougher than stainless (with a few very, very rare exceptions I'd never trust a long knife to be stainless steel) with the trade off of being a lot more of a hassle to take care of, since it needs to be regularly cleaned and oiled.

If you want a fire starter, carry a magnesium fire starter. With the carbon steel knives, you can probably strike it against the back of the blade to create the sparks you'll want and if not (like with some of the coated ones) you'll be carrying the striker anyway.

For sharpening, you'll want to get a decent sharpening setup and start stropping. A couple of easy sharpening systems would be the superior Spyderco Sharpermaker (usually available on Amazon around the $50 mark) or the Lansky Sharpening system which while cheaper isn't as good. You could take the time to learn how to free hand it, but most casual users don't care that much because it takes a long time to get proficient at freehand sharpening. Stropping is running the blade against something like smooth leather (usually smooth leather, actually) to remove burrs along the blade of a knife made by use and sharpening and the restore a blade to a better edge without removing metal. Stropping allows for a level of sharpness unachievable by sharpening alone and extends a knife's lifetime by allowing sharpness to be achieved for longer without removing metal from the blade. To learn how to strop, watch videos on YouTube or check out guides from the sidebar of /r/knives.

Finally, if you want a whistle, just carry a whistle. If you want a mirror for signaling, carry a small signaling mirror or mirror polish the knife you buy (a process where you sand the blade with increasing grit level sandpaper until it shines like the sun and you can see yourself in the blade).

If you have any more questions, feel free to ask.

u/ARKnife · 2 pointsr/knives

At that price range, I'd recommend getting one of the RAT 5 fixed blade (or any other blade from that series if you prefer longer/shorter blade).

Those are useful, have good and consistent quality and present a great value.

For a folding knife I'd get an Ontario RAT 1, slightly below your budget, but can't think of a better folding knife for camping.

u/fromkentucky · 2 pointsr/Survival

I had an Ontario RAT-5 for a while. About the same size as an ESEE 5, but with a thinner blade and full-flat grind. The handle was uncomfortably bulky and although it held up to my abuse, I just didn't like it. The blade was thin enough to do finer carving tasks, but it was too wide and the edge profile was terrible. I ended up using my Mora knife and Fiskars hatchet more and the RAT-5 was relegated to batoning duty and even in that I preferred the hatchet. In fact, I carved my first bow drill kit with that Fiskars.

I was considering stepping up to an Ontario RAT-7, but instead I traded the RAT-5 for a KaBar Becker BK7, which is a BEAST of a knife. Longer than an ESEE 5, but just as thick and with a similar profile. It really impressed me with the amount of work it could do and how easy it was to use, but it was heavy and just too fat to do anything but chop and split, so again, I was using my Mora and hatchet for most stuff.

I finally decided to try a different direction and traded the BK7 for a much smaller ESEE 4. Around the same time I bought a Bahco Laplander, and I am in love with this combo. The Bahco eats through 1-2" branches with ease (while generating plenty of sawdust for tinder) and the ESEE is just long enough to baton them into kindling and carve up some feather sticks. The best part is, the ESEE 4 and Bahco together weigh about as much as the BK7 in its sheath, and take up about as much space, but they are FAR more versatile.

I realize the ESEE 4 may be just out of your price range, but Kabar makes a similar knife called the BK16. However, the ESEE comes with a lifetime warranty.

I still take my Fiskars with me occasionally, but for weekend camping, I can process plenty of firewood with the ESEE and Bahco faster than I ever could with any of the bigger knives. If I needed to build a shelter or was venturing into unfamiliar territory, I'd want the hatchet because it's such a capable tool.

The ESEE 5 was designed for downed pilots who can't fit a hatchet or folding saw into their kit but may need to build a shelter, so they made it big and heavy. I understand first hand that big knives are appealing and certainly have their strong points, but their size, weight and thickness can make them difficult to use in a lot of ways and in reality, a big knife will never chop as well as a decent hatchet, because the knife's weight is centered just above the handle, not directly behind a huge wedge that drives into the wood. What you really want in a survival knife is versatility and I've spent a lot of time, money and energy figuring out that size doesn't add versatility.

u/wiyumishere · 1 pointr/knives

Out of the Esee I was looking at this one:http://www.amazon.com/Ontario-8627-RAT-5-Knife-Brown/dp/B000R30XAC/ref=sr_1_6?ie=UTF8&qid=1382571167&sr=8-6&keywords=esee+4 since it has decent reviews. Any other recommendations?

u/mijustinzx6r · 1 pointr/Hunting
u/programming_prepper · 1 pointr/Survival
u/GeneralGump · 1 pointr/knifeclub

I'd say go for an ESEE or RAT. You can get them from 3-7 inches I think.

Here's and ESEE 6

and here's a RAT-5 and a RAT-7

u/LMNOBeast · 1 pointr/BudgetBlades

A little late to the party... You are following the same trajectory as me. I'm just now expanding into fixed blades, but before you put the brakes on budget folders you should check out a few more options.

The Coast FX350 (9cr18mov, G-10, frame lock, 3-position clip) is a beauty for under $20. The BX315 (9cr18mov, rubberized handle, lock back) is great for wet work and is currently selling for just under $15—it has a sheath instead of a clip because the large rubberized grip doesn't slide in and out of pockets very well. The BX315 also has a little brother, the BX300.

If you like the Kershaw Link's profile then you should try a Flock (8cr13mov, FRN, tip-up clip) that's going for $15. It is a dealer exclusive that was poorly marketed and escaped most people's notice. Probably one of the best Kershaw deals going right now.

Spyderco's Spy-DK is currently selling for $30. It's a special non-locking model for Denmark knife laws. It's old school slip joint action but you get a N690Co blade that is a step up from their more expensive budget folders.

Back to fixed blades...

As I mentioned in another comment, Schrade is a good place to start for budget fixed blades—check out the SCHF36 Frontier for under $30. One thing to note is many fixed blades in this category are going to use 1095 steel which typically requires some maintenance, but most are powder coated to address this. Don't let 1095 scare you away from some nice options.

Now, I know you are looking for budget knives but there is a mid-range option that you may want on your wishlist. If you have an Ontario Rat folder (which you should) then you might want to compliment it with a Rat 3, 5, or 7. Like I said, I wouldn't consider Ontario fixed blades as 'budget' but they're a bargain compared to brands like Tops.

I hope this helps and have fun exploring, this rabbit hole runs DEEP.