Reddit reviews OxGord OBD2 Scanner Code-Reader-Reset Tool MS309 - No Computer or Phone Needed Diagnostic for Cars 1996 and Up - 3000+ Codes - Diagnose Check Engine Light Erros
We found 4 Reddit comments about OxGord OBD2 Scanner Code-Reader-Reset Tool MS309 - No Computer or Phone Needed Diagnostic for Cars 1996 and Up - 3000+ Codes - Diagnose Check Engine Light Erros. Here are the top ones, ranked by their Reddit score.
FEATURES: Read or clear generic and manufacturer error codes, retrieve VIN (vehicle identification numbers) on 2002 or newer vehicles supporting mode 9, and reset the airbag lightINCREDIBLY SIMPLE: Plug it into the 16-pin connector underneath the steering wheel, turn the ignition, and you're ready to go using only 2 simple buttonsCOMPATIBILITY: Works with most US vehicles 1996 and newer that are OBDII and CAN compliant and supports all OBDII protocols as these are required in all US vehicles after this dateLCD SCREEN: Displays the meaning of over 3000 generic error code definitions in the database, it also clears trouble codes (DTC’s) and turns off the check engine light (MIL)HANDHELD: At 2.75" x 1" x 4.25" (26.25 inch cable) and only 8 ounces, it literally fits in the palm of your hand, plus it's powered by your vehicles, Data Link Connector so you don't even need batteries
OBD2 Scanner CAN OBDII Code Reader - Scan Tool for Check Engine Light - Universal Diagnostic for Car, SUV, Truck and Van (MS309) https://www.amazon.com/dp/B0743X5WV8/ref=cm_sw_r_cp_apa_seRSAb73JG0W8
Plug this in and erase the code
You can buy a OBD scanner cheep, to reset your code if the local auto parts store won't do it for free.
When they say step 2 is "The computer must be bad", run like hell. The ECC being bad is the last thing you ever consider.
Take your car to a real mechanic, not the dealer, not a store, not a chain, but an independent shop, and have them fix it right. It's never about "getting the light turned off", it's about fixing what turned the light on. An Evap code can be as simple as a loose gas cap, but there are lots of other possibilities, none of which should cost you $800 to rectify. IDK if if a lawyer is cost effective, but never take it back there again.
So a combination of these:
https://ftecu.com/shop/kds-to-obdii-adapter-harnsess/
https://smile.amazon.com/gp/product/B0743X5WV8/
​
Took less than five minutes to clear the VSS error code from not turning TC off.
it could be something to do with the air flow sensor or air temp sensor.. if you have it happen again you can check the computer errors that are stored and also while it is running.. i can't imagine a vacuum line costing $250 thats pretty insane unless there was no way to get to it unless you disassembled the throttle body or manifold.. AdvanceAuto can check your stored codes or you can buy a scanner on Amazon for your car for under $50 .. good thing to have I got one that was about $25 for a friend it works good enough
https://www.amazon.com/dp/B0743X5WV8
get the 309 has a better readout
what you need is a OBD2 reader if you want to buy it local
that should be enough.. then google your codes if it doesn't have a human readout of what the code is
you should probably have a error code stored if you say it acted up again as long as you didn't lose battery power to the computer