Reddit reviews Permatex 81158 Black Silicone Adhesive Sealant, 3 oz. Tube, Pack of 1
We found 8 Reddit comments about Permatex 81158 Black Silicone Adhesive Sealant, 3 oz. Tube, Pack of 1. Here are the top ones, ranked by their Reddit score.
Sensor-safe, general purpose black RTV indoor/outdoor sealantSeals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl topsWaterproof and flexible; resists water, weather, and vibrationTemperature Range: -75°F to 450°F (-59°C to 232°C)Suggested Applications: Door frames, electrical connections, seams and roofs, vinyl tops, and weather stripping; protects and repairs electrical wiringFit Type: Universal
Yes! But I fixed mine permanently with a little application of Permatex 81158 adhesive sealant silicone (just a few squirts into the weather seal, evenly spaced, on each side of the truck).$3 from Amazon
Take your headlight out, remove bulbs/wires/screws, bake it in the oven for 20mins at 200degrees, pull it apart, and reseal.
Then place it back in the oven, same temp, for 10 minutes to warm it up and squeeze the two pieces nice and tight.
I recently painted the chrome trim of my headlights and the process wasn't hard. I used this black silicone sealant to make sure water stayed out.
This is the stuff you need.
https://www.amazon.com/Permatex-81158-Silicone-Adhesive-Sealant/dp/B000AL6WLA
In case you ever need to delid it again. It'll come apart just like the stock stuff.
I Delided my 7700k and lost a solid 15c and I use a NZXT AIO Cooler.
I used these 2 things and worked like a charm.
Thermal Grizzly Liquid
And this Helpful tool
You can go the extra mile and use plain nail varnish to help with protecting the resistors and a little tiny bit of [This] (https://www.amazon.co.uk/gp/product/B000AL6WLA/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1)
My next step is for a custom water loop but planning to do it in an itx case when I upgrade next.
Hopefully this was of some use.
I have my X2 enclosers sealed up pretty tight with https://www.amazon.com/gp/product/B000AL6WLA but I am still going to limit my rides as much as possible once we get into the winter snow/ice/road salt season. Like others have said, my main concern is going through patches where salt or brine has been applied to road and trail surfaces because it is majorly corrosive to _all_ materials. Nothing worse than salt + moisture.
For the light, you want a silicone sealant. Something like this: http://www.amazon.com/Permatex-81158-Silicone-Adhesive-Sealant/dp/B000AL6WLA/ref=sr_1_2?ie=UTF8&qid=1419374300&sr=8-2&keywords=black+silicone+sealant
Be careful on the door. Are there screws behind that strip? If so, and you glue something on, you'll never be able to remove the door panel. I'd just do a bit of double stick tape, but not so much that I couldn't remove it.
This stuff: https://smile.amazon.com/Permatex-81158-Silicone-Adhesive-Sealant/dp/B000AL6WLA?sa-no-redirect=1
I use it quite frequently to fix holes and cuts in regular tires.
Black RTV works well.
http://www.amazon.com/Permatex-81158-Silicone-Adhesive-Sealant/dp/B000AL6WLA/ref=sr_1_1?ie=UTF8&qid=1343347050&sr=8-1&keywords=black+RTV