Reddit Reddit reviews Platinum Tools 15015C Cat5/6 Cable Jacket Stripper

We found 8 Reddit comments about Platinum Tools 15015C Cat5/6 Cable Jacket Stripper. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Hand Tools
Strippers & Crimpers
Wire Strippers
Power & Hand Tools
Platinum Tools 15015C Cat5/6 Cable Jacket Stripper
Accepts Cable Diameters From 0.18" To 0.25" (4.5mm - 6.3mm).long Life BladeRemoves The Cable Jacket On Cat5/5e/6 CablesWill Not Nick Inner ConductorsDurable High Impact Plastic Housing Is Molded From Yellow Plastic To Make It Easier To Locate
Check price on Amazon

8 Reddit comments about Platinum Tools 15015C Cat5/6 Cable Jacket Stripper:

u/ImaginaryCheetah · 3 pointsr/electricians

https://www.amazon.com/Platinum-Tools-15015-Jacket-Stripper/dp/B000FI2RVC

not sure if this one has a set screw to limit cut depth.

https://www.amazon.com/Coaxial-Cable-Stripper-RG59-RG58/dp/B01NBODKDJ/

coax stripper is another option, but those sometimes only have set cable diameters.

if you're terminating a whole panel, this type of jacket cutter is much easier than regular strippers

u/is_not_null · 3 pointsr/networking

https://www.amazon.com/Platinum-Tools-15015-Jacket-Stripper/dp/B000FI2RVC/

Best stripper ever made. Put it on. Spin twice one way, once the other way. In my 10 years of using mine, I have never had it even scratch one of the pairs, but it cleanly cuts through even thicker cat6a jacket.

Pair that with this, and a good set of electricians scissors and you are set.

https://www.amazon.com/TRENDnet-RJ-45-RJ-12-RJ-11-TC-CT68/dp/B0000AZK4G

u/lhatereddit101 · 2 pointsr/electricians

what you should use:
https://www.amazon.com/Platinum-Tools-15015-Jacket-Stripper/dp/B000FI2RVC

what I actually use:
https://www.amazon.com/Classic-Full-Size-Lighter-Maxi/dp/B0086630A2/ref=mp_s_a_1_8?keywords=bic+lighter&qid=1571335177&sr=8-8

just put your man hands on, heat the wire where you need to strip it, twist and pull the end off. not the cleanest cut, but it works. tired of those spinner style cutters nicking the inner wires.

u/Mystery_Hat · 2 pointsr/cableporn

Currently these are the tools I use... Mostly Klein. I've been using these for a few years now with minimal issues...

Crimper

Punch Down

Side Cutters

Scissors

Stripper

Lan Tracer / Tester


u/choob_nation · 2 pointsr/computertechs

If you're getting a crimper, I highly recommend the Platinum tools ez rj-45 crimper and ez rj-45 connectors. This has changed my cabling making game.


crimprer

cat 5e connectors


[strain relief, optional but look prettt] ( http://www.amazon.com/dp/B0034B3KYU/ref=cm_sw_r_udp_awd_BLIrtb16NPMC2)



Platinum tool jacket stripper

u/gamebrigada · 1 pointr/networking

I would recommend Platinum tools for all networking gear. They really think this stuff through. The only other company that spends as much engineering hours re-inventing existing products to make the installers job easier is Siemon, but they charge you a lot for it.

These connectors + Strain Reliefs

With this crimper

With this separate stripper

That set will put your RJ-45 termination time to under 2 minutes with just a bit of practice, and under 1 minute after some experience. Even pros that have decades of experience wont be able to touch you with standard connectors.

Why separate stripper? If you terminate a lot, try the thing. All-in-one tools are garbage, you can't make 5 completely different tools work well in one tool, you have to sacrifice. When the separate tools cost a couple bucks, why make any sacrifices? I wish they made one of these for Cat6a, as I have yet to find a decent stripper for it.

Driver set

I would recommend this set, but maybe get it for yourself later as a gift. These cover the most used drivers, and they will outlast you. Stick to cheapos for rare ones unless you want to treat yourself. Wiha is the snap-on of electronics screwdrivers. Except without the payment plan.

Get yourself a cheapo kit for testing cable. All the cheap ones work just fine, as long as it tests the pairs you're generally set. You can even get one to test multiple runs at the same time, just takes a few short patch cables and oddly wired keystones, you can make those from spare parts. If you want something more substantial without spending money, get yourself a pockethernet.

I would stay away from Klein, they just invest quality of materials into age old designs. Yeah they'll last, but they really didn't think about it.

u/Koker93 · 1 pointr/cableporn

Every time I tried one of these on cat wire the blade cut into the inner wire insulation. You're better off either using the blades built into the handle of most cat crimpers or getting a jacket cutter.

I have this one

works awesome

u/gymleader_brock · 1 pointr/computertechs

I bought EZ-RJ45 HD and it was a little more expensive! I can't compare it to the non ratcheting version, but feel it was worth every penny.

Also platinum tools makes this jacket stripper that is wicked fast.