Reddit reviews Plugable Active DisplayPort to HDMI Adapter - Connect Any DisplayPort-Enabled PC or Tablet to an HDMI Enabled Monitor, TV or Projector for Ultra-HD Video Streaming (HDMI 2.0 up to 4K 3840x2160 @60Hz)
We found 61 Reddit comments about Plugable Active DisplayPort to HDMI Adapter - Connect Any DisplayPort-Enabled PC or Tablet to an HDMI Enabled Monitor, TV or Projector for Ultra-HD Video Streaming (HDMI 2.0 up to 4K 3840x2160 @60Hz). Here are the top ones, ranked by their Reddit score.
Active adapter enables you to connect a DisplayPort video output from your laptop or desktop PC to HDMI-equipped displays, HDTVs, and projectorsSupports resolutions up to 3840x2160 (4K) Ultra-HD @ 60Hz, 1080P@120Hz. Does not support HDR displays. Supports 8-channel LPCM and HBR audio up to 192kHz sample rateAMD Eyefinity compatible. VESA (DisplayPort) certified. Compliant with VESA Dual-Mode DisplayPort 1.2, High Bit Rate 2 (HBR2), and HDMI 2.0 standardsWill convert from DisplayPort on computer to HDMI on monitor only. Not a bi-directional adapter and not compatible with gaming consoles, DVD/BluRay players and USB ports. Note that source device and attached display must support the desired resolution/mode - adapter will not allow use of resolutions which are not supported by the source or displayWe love our Plugable products and hope you will too. All of our products are backed with a 1-year limited parts and labor warranty and Seattle-based email support
Sure, this seems to be the right one: https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8/ref=sr_1_5?ie=UTF8&qid=1495641526&sr=8-5&keywords=active%2Bdisplayport%2Bto%2Bhdmi&th=1
"Active" is the key word here
I don't think there would be any "audio delay" or anything. These adaptors may be "active", but they aren't like transcoders; both displayport and hdmi support pretty much the same colorspaces for video, and same audio formats. All it's doing is changing the transport layer.
Honestly, an HDMI repeater or even your home theater receiver probably would be more or less the same amount of "delay" if not more.
There are however some meh adapters out there, I recently had to go through like two bad ones before I found a good one; it was sort of my fault since I was trying to cheap out by going for inexpensive junk. If you do get one, I highly recommend 'Plugable' brand ones, like this one, this is the one that finally worked for me; they seem to be one of the better and more reputable companies for adapters, etc.
You absolutely can do this, personally I use this one because I remember it being recommended a lot on this sub. It supports ultra mode(90hz) because it converts the signal to HDMI 2.0 which supports 4k at 60hz instead of just 30hz.
This is what you need:
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8/
Or if you don't mind not carrying audio and being limited to 1080p, then a DVI adaptor will work as well:
https://www.amazon.com/CableCreation-2-Pack-Gold-Plated-Adapter-Converter/dp/B01FM52438/
https://www.amazon.com/gp/product/B00S0C7QO8/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
This is the one I use. Works like a charm for me!
Try this
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8
This is the one you need. I used it when my Fury was capped at 60hz, and this sorted it out and let me use Ultra mode.
https://www.amazon.com/dp/B00S0C7QO8/
The Cable Matters variant doesn't mention refresh rates, so I wouldn't trust it.
I use a 15ft active USB cable, 3ft displayport to hdmi adapter, 15ft active hdmi cable, and a link box in between. With my Lenovo explorer. Works perfectly. Holds 90fps. And no static or anything. I use the bluetooth on the link box.
Plugable Active DisplayPort to... https://www.amazon.com/dp/B00S0C7QO8?ref=ppx_pop_mob_ap_share
AmazonBasics High-Speed HDMI... https://www.amazon.com/dp/B014I8T8FC?ref=ppx_pop_mob_ap_share
Cable Matters USB 3.0 Cable (USB... https://www.amazon.com/dp/B00HSS9LEI?ref=ppx_pop_mob_ap_share
HTC Vive Link Box https://www.amazon.com/dp/B01LXR6DKV?ref=ppx_pop_mob_ap_share
AC to DC 12V 1.5A 12V1.5A Power... https://www.amazon.com/dp/B018JL0YIY?ref=ppx_pop_mob_ap_share
Haven't seen anyone say this - this is how i solved it
Stop trying to adapt the connection the rift/vive is using - give it the native conection
Then one of those like £20 adaptors should be fine for your TV no?
edit: /u/bushmaster2000 already said this
No, DVI doesn't support that resolution, you need displayport.
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8
This active adapter support DP to HDMI 2.0 for 4k @ 60hz.
Non-active adapters tend to be 4k @30hz.
https://www.amazon.com/gp/product/B00S0C7QO8/ref=ox_sc_sfl_title_5?ie=UTF8&smid=A3HIHADV23VGU1&th=1
You need something like this that's verified to go to 4K.
I have the exact same adaptor except it's mini DP to HDMI.
Works just fine for 2560x1080 75hz.
it uses multi-stream feature of displayport, a RX 550 might be a idea with a DP>HDMI adapter and DVI>HDMI cable
if your only using it for desktop work the rx 550 is way newer than 5450 and GT 710 and will do 4K HEVC/AVC video decoding and encoding etc so perfect for media
https://www.amazon.com/Gigabyte-Radeon-Graphic-Cards-GV-RX550D5-2GD/dp/B06Y43NJ3D/ ($89)
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8 ($20)
https://www.amazon.com/AmazonBasics-Input-Output-Adapter-Cable/dp/B014I8UQJY ($6)
Note that it will have to be an active HDMI 2.0 adapter. Passive adapters will not work. I'm using a combination of a cheap USB-C to Displayport dongle and the Plugable Displayport to HDMI 2.0 active adapter (https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8) to drive a 43" 4K Samsung at 4K60Hz from my XPS 9350, and it works beautifully. There are a couple of combined adapters now available as well, which adapt directly from USB-C to HDMI 2.0 and should do the trick, though I haven't used any of them myself. Here's one: https://www.amazon.com/Cable-Matters-Thunderbolt-DisplayPort-Incompatible/dp/B01K51GM46
I did a research about the Explorer (since I noticed that people love their Explorers and they said good things about it) so I got interested in it as well and I think I can reccommend you to **not use the flip up display thing since it is sensitive and it can break easily** (instead use the Flashlight feature that allows you to see the real world using its cameras without taking off the HMD)
​
As for the BT donle I heard good things about this **Plugable BT dongle** :
https://www.amazon.com/Plugable-Bluetooth-Adapter-Raspberry-Compatible/dp/B009ZIILLI/ref=sr_1_4?s=electronics&ie=UTF8&qid=1538640779&sr=1-4&keywords=bluetooth+4.0+dongle
Also some GPUs require the right display port (in order to get 90 fps at max and not only 60 fps) so I am also going to buy the **Plugable Active DisplayPort to HDMI 2.0 Adapter**
https://www.amazon.com/gp/product/B00S0C7QO8/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
​
And I found that the best rechargeable AA batteries are these of Eneloop (I am also going to buy the standard charger they have with it) :
https://www.amazon.com/dp/B00JHKSMJU/ref=sspa_dk_detail_5?pd_rd_i=B01G3SS04A&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=f52e26da-1287-4616-824b-efc564ff75a4&pf_rd_r=KS01C5W02E586HF605CW&pd_rd_wg=E0zRf&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&pd_rd_w=M28DE&pf_rd_i=desktop-dp-sims&pd_rd_r=2f98b6c6-cc99-11e8-9fea-e722222b4194&th=1
​
These are the stuff I decided to buy for my yet to be purchased Explorer after doing my research.
I've used this one without any problems. Gave me 4K@60 without issues from a Z97I-PLUS board with a i7-5775C in it.
That converter is not capable of 4k60fps. It's passive and uses DP++ to convert, which only supports 1920x1200. You need an active packet conversion cable to do this
Edit: This is the adapter I use for my TV
Plugable Active DisplayPort to HDMI 2.0 Adapter (Supports displays up to 4K / UHD / 3840x2160@60Hz) https://www.amazon.ca/dp/B00S0C7QO8/ref=cm_sw_r_cp_apa_D9A9Bb4JTCXSK
Get one of these
https://www.amazon.com/dp/B00S0C7QO8/ref=cm_sw_r_cp_apa_ZTrTBbC671J6P
Display Port accepts digital signal input with backward compatibility to HDMI which is also a type of digital interface. The specs on your GPU say that it supports up to 4096 x 2160 digital resolution so you won't have any troubles GPU wise. You might need a different converter though. I linked that one just for illustration purposes.
There are several models out there so you certainly should be able to find one that fits your need in a nearby shop or online.
Edit: Added link.
That won't work. Oculus requires HDMI 1.4, WMR requires HDMI 2.0. That adapter is equivalent to a DP -> HDMI 1.4. You'll want either the Plugable one or the Club3D one. Yeah, they're more expensive and you might be cheap, but they're more expensive because you require more bandwidth than the one you posted.
The one you posted would work, but your framerate would be locked and you might as well just use the onboard HDMI 1.4 at that point.
That adapter won't work. The cheap ones only support lower resolutions under 1080p at 60 Hz. You need an active 4K capable adapter that can drive 90Hz like this one: https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8
FYI.. the adaptor I used. https://www.amazon.co.uk/Plugable-Active-DisplayPort-Adapter-DisplayPort-Enabled/dp/B00S0C7QO8/ref=redir_mobile_desktop?_encoding=UTF8&psc=1&ref_=ya_aw_oh_bia_dp
And I'll happily delete these posts if you think it's wise.
Sure, this is the card i'm looking at, seams to have DP1.2 HDMI 1.4 and DVI CEX with this Adapter
The gt1030 is a good shout though not too far over my budget, i wonder which is the most powerful.
I am using this one, it works great, no issues at all.
https://www.amazon.co.uk/gp/product/B00S0C7QO8/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
I bought this and it works great.
https://www.amazon.ca/gp/product/B00S0C7QO8/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I purchased this adapter and yeah it works flawlessly so far.
Would this work? Did some more reading and saw 'active' adaptors mentioned
https://www.amazon.com/gp/product/B00S0C7QO8/ref=ask_ql_qh_dp_hza
would this let me get the 144hz at 1080p?
You might want to try an adapter that does displayport to HDMI 2.0. I have a GTX 1070 and have issues with HDMI 2.0 4k 60hz. If I use the adapter from Displayport ti HDMI2.0 to the TV, it works fine.
https://www.amazon.com/gp/product/B00S0C7QO8/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B00S0BWR2K/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
I've bought both and tested with a Dell laptop with mini displayport out and it worked with 4k @ 60hz. I tested the full displayport adapter with a GTX 1080 with Win10 and GTX 1070 with OSX Sierra. Both work with 4K @60hz.
There is another brand as well at amazon, I would steer clear from it, it nearly burned out one of my video cards when I used it and burned out my HDMI cable and the adapter.
My DVI slot is already taken by my second screen x)
I found this adapter : https://www.amazon.com/gp/product/B00S0C7QO8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I picked this up and there is no signal =( https://www.amazon.com/gp/product/B00S0C7QO8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Buy yourself a DisplayPort to HDMI 2.0 adapter
I have that one, but there are lots available.
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8/ref=sr_1_4?keywords=plugable+hdmi+2.0&qid=1572419174&sr=8-4
Yea, I'm sure the DP to HDMI adapter is Active. Here's the exact one I bought and tried using:
https://www.amazon.com/gp/product/B00S0C7QO8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Damn, so using the DVI-I (using a DVI-I to DVI-D connector) isn't even an option for my 4th spot on the GTX 970 anyways? I hadn't updated my drivers in a while, which I did last night... still not working. Ahhhhh
Same issues here. Initially I hooked up my 4k TV to the HDMI 2.0 port, and the Oculus Rift used a DP-HDMI converter. But in some games (mostly Robo Recall), I had a problem where the Rift display would begin flashing black after a minute or so in-game. Eventually I decided to troubleshoot it, and removed cable extenders / adapters / etc until I found the problem. My conclusion was for me, Robo Recall worked fine with the Rift plugged in over HDMI, but not with the DP-HDMI adapter.
There are decent DP-HDMI adapters now that support 4k/60Hz. I bought this one recently and it's working fine:
https://www.amazon.com/gp/product/B00S0C7QO8/
So I use that to connect my TV.
Sorry updated the link
https://www.amazon.co.uk/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8/ref=sr_1_2?ie=UTF8&qid=1504090610&sr=8-2&keywords=plugable+dp+to+hdmi
this will do 1080p at 120hz all he needs is a highspeed hdmi cable and the adapter should get 120hz with audio
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8/ref=sr_1_3?s=electronics&ie=UTF8&qid=1520284825&sr=1-3&keywords=displayport+to+hdmi+adapter+1080p%40120hz
4k is a gray area for hdmi. Since ultimately you're limited to the data rate of HDMI that's where your issue lies. It looks like you'd need an active adapter for this to work. Something like this:
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8
You don't mention what you're using to convert from displayport to HDMI though.
You'd want one of the following:
https://www.amazon.co.uk/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8/
Or
https://www.amazon.co.uk/ICZI-Plated-DisplayPort-Active-Adapter/dp/B01M8PGQDF/
AS WELL AS
https://www.amazon.co.uk/Primewire-Cable-Ethernet-channel-bandwidth-Black/dp/B01MYXKDU8
(in whatever color/length would work for you)
That one you referenced would only give you 1080p or 1920x1200, rather than 4K @ 60Hz.
something like this - https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8/
That DP to HDMI adapter seems suspect. Seems like 29um58 doesn't have DP input, so your best bet is probably to look around for a better adapter/cable. The older ones mostly do only up to 1200p, you need a newer one like this.
You need an active DisplayPort to HDMI adapter that explicitly supports 4K and HDMI 2.0. Club3D makes one and so does Plugable.
>re out why things aren't working through your DisplayPort.
>
>Just to confirm, which (make/model) adapter are you using?
Hello. I'm currently using a cable matters adapter I bought from Amazon:
https://www.amazon.com/Cable-Matters-DisplayPort-Supporting-Technology/dp/B00EDT0072/ref=nav_ya_signin?ie=UTF8&qid=1537410927&sr=8-13&keywords=cable+matters+hdmi+to+displayport&
​
The portal recognizes the headset, but no video output.
I have also tried another one from Plugable earlier:
​
https://www.amazon.com/gp/product/B00S0C7QO8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
​
but with the same results.
I had to buy an Active displayport adapter to make it work with my TV, I have the Asus 280x directCU II TOP
USB C to displayport and then displayport active adapter to HDMI 2.0 should do the trick.
According to the specs on this page:
https://www.lenovo.com/us/en/laptops/thinkpad/thinkpad-e-series/ThinkPad-E580/p/22TP2TEE580
You do have DisplayPort over the USB C port.
EDIT:
If you're curious, these are the Adapters I have:
https://www.amazon.com/gp/product/B074TTB7XQ
https://www.amazon.com/dp/B00S0C7QO8
You'll need an active DisplayPort 1.2 to HDMI 2.0 adapter. I used the Plugable adapter between my 290x and original Odyssey just because it was the one recommended on the windows support page. It worked well.
I had a Club3D adapter that I used to connect to my tv which didn't work with the Odyssey. It had a strange sizing issue between the HDMI port on the adapter and the Odyssey. I simply couldn't plug them into each other, though other HDMI cables and ports worked with each.
This one: Plugable Active DisplayPort to HDMI 2.0 Adapter (Supports displays up to 4K / UHD / 3840x2160@60Hz) https://www.amazon.com/dp/B00S0C7QO8/ref=cm_sw_r_cp_apa_A6SuzbDP7NTBB
Works perfect for me. Game 4K60 all day (well, for the few titles that'll allow me to push it that high 😁)
Depends on what resolution you're running and what version the adapter is, but I guess you're not trying to run 4k @100hz with a 1070 anyway so you'll probably be good. Your TV won't have display port features if it doesn't have display port.
This is probably what you're looking for
You need an active displayport adapter for it to work at 90HZ. The Pluggable adapter is the one Microsoft even recommends and can be found for under $19USD/$26CAD on Amazon.
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8?th=1&psc=1
I think this might be the way to go for the laptop / monitor.
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8/ref=sr_1_3?s=electronics&ie=UTF8&qid=1494948300&sr=1-3&keywords=dvi+to+hdmi+2.0
Honestly thinking of just dumping the gaming rig and using the laptop only. Its got an i7 and can do eGPU. ThinkPads are pretty cool. Thats another project though. I might try this DP to HDMI I liked for this project.
I agree to just get a new video card . but it could work with an ACTIVE display port> hdmi adapter like this
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8/ref=sr_1_1?s=electronics&ie=UTF8&qid=1495939443&sr=1-1&keywords=dvi+to+hdmi+active
I just started having this problem after adding a display port to dvi adapter. It is not clear yet if the adapter is to blame or I’m just noticing it now that the headset is plugged in full time.
display to dvi adapter
Okay so it does look like active adapters are advertising 4K 60Hz support so this might work
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8 Here, this wouldn't work at the 144hz experimental mode, but if you could turn down the resolution to 1080p you could do it at 120hz standard. Would this work
I may be misunderstanding, but I had an issue once with using a display port output with an HDMI monitor. When I used a straight DP to HDMI cable, it wouldn't work. BUT then, I found out that I needed an "active" DP to HDMI cable/adapter. The adapter cost me about $20.
Active Display Port to HDMI adapter
If you really did get cheated, don't just take the loss. eBay has an interest in keeping up their reputation as being generally safe for buyers.
Since you tried the cable matters one, I would suggest you give the pluggable one a shot since it is a newer device and might have some newer conversion chip in it: http://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8
If that fails, then the issue has to be the hdmi implementation in the monitor itself.
And just in case, try turning off any power management settings. You hopefully want to turn off DDC/CI. This is the feature that lets your computer shutdown the monitor and turn it back on. Sometimes this is the root cause and disabling it fixes the issue. Although I assume powersaving via the pc stops working. This fixes it if you have a blank screen when plugging a monitor into your video card or adapter.
The absolute last thing to try would be the newer dp to hdmi 2.0 adapters. Now these don't specifically say they work with hdmi 1.4,1.3,1.2, etc and I have not found a review of anyone testing it. But the physical chip in them claims it does, but nothing says if they programmed it to take advantage of that feature. http://www.amazon.com/Club3D-Displayport-1-2-HDMI-CAC-1070/dp/B0194F1MY4
Plugable Active DisplayPort to HDMI Adapter (Supports displays up to 4K / UHD / 3840x2160@30Hz) https://www.amazon.co.uk/dp/B00S0C7QO8/ref=cm_sw_r_other_apa_KiopxbC66XZ5H
So this would be what im looking for? I've never even heard of Displayport before today so sorry if this is obvious, haha
This is the adapter, it states:
>Supports resolutions up to 3840x2160 (4K) Ultra-HD @ 60Hz, 1080P@120Hz
Also reviews in the product says people got it to work 4k@60
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8/ref=sr_1_1_sspa?ie=UTF8&qid=1511834789&sr=8-1-spons&keywords=plugable+displayport+to+hdmi&psc=1
I just tried the VR headset > DP adapter and lo and behold it worked. I've only tried 1 little game so far but that worked as well as before. The reason I didn't think it would work is because my headset outputs at 2880x1440 apparently at 90hz(I wouldn't know how to check besides what the specs say) which is nearly same bandwidth as 4k@60. So I'm still curious as to why PC DP>Adapter>4K TV doesn't work, but I'm glad to have a workaround. I think it should be okay to have the TV in the HDMI port on my gpu, when I get another monitor down the road(will be a strange setup) that will have DP input so that should work seamlessly.
The only thing I still have a problem with is my computer says its in multi-display mode even with the VR unplugged and the only monitor plugged in is the TV. Device Manager says there is a Generic Non-PnP Monitor on the integrated GPU and a Generic PnP Monitor on my gtx 1060. Any idea why this could be?
Thank you so much
I have this one, works well - https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8/ref=sr_1_1_sspa?ie=UTF8&qid=1511999502&sr=8-1-spons&keywords=displayport+to+hdmi+plugable&psc=1
This should work.
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8/
Why don't you just run 2 outputs from your PC?
Run your GPU's HDMI port into your Pioneer, and in Kodi/DSPlayer set that HDMI device as the selected audio device and enable your DD/DTS pass-through , etc.
Then if you don't have a second HDMI port, get a DP to HDMI adapter and run that to your TV.
I've run my system like this before and it works perfectly fine.
Here is a basic Active DP to HDMI adapter that should have no problem with full 18Gbit HDMI 2.0, or at least has no problems with it for me.
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8
> now I'm curious to find out whether it's worth it to pay $40 for an adapter.
$20.
this is the one microsoft recommends.
https://www.amazon.com/Plugable-DisplayPort-Supports-displays-3840x2160/dp/B00S0C7QO8
Also, I think you can get steam to tell you how many frames you're getting pretty easily. getting WMR to tell you is a bit more convoluted.