Reddit Reddit reviews Polywatch Plastic Lens Scratch Remover

We found 45 Reddit comments about Polywatch Plastic Lens Scratch Remover. Here are the top ones, ranked by their Reddit score.

Watch Repair Tools & Kits
Clothing, Shoes & Jewelry
Shoe, Jewelry & Watch Accessories
Watch Accessories
Polywatch Plastic Lens Scratch Remover
Removes Scratches from Plastic Watch Crystals
Check price on Amazon

45 Reddit comments about Polywatch Plastic Lens Scratch Remover:

u/tcmcqueen · 5 pointsr/Watches

Don't get it serviced by Omega, they'll do a full restoration and in my opinion the patina on this watch is what makes it unique. Don't polish it, don't replace the dial or relume it. If you send it to Omega they will replace everything until the watch is "like new", they will polish the case, replace the dial, hands, pushers, crown, crystal, and the watch you get back will not really be the watch you sent them. Just a warning. I'd avoid Omega factory for service work like this. It would probably run about $600-800 give or take, depending on how many issues they found with the watch.

That said you could have the crystal replaced (it's hesalite, a type of plastic, and considered a maintenance item and about $30) or try polishing it to take out the scratches. You should have the movement lubed/serviced to maintain reliability, and the pushes (likely the crown will need to be as well) replaced.

One of the best guys I know for Omega service is Al at Archer Watches in Canada. You're probably looking at around $200 for the movement service/regulation and another $100-150 in parts (mainspring, pushers, crown, and crystal), +shipping. It's not cheap but it's cheaper than sending it off to Bienne. He's a little backed up right now and might not be taking new work for a few weeks but you might want to give him an email and ask him about the service he could perform.

As for your particular watch, it's a Speedmaster caliber 861, which is very similar to the currently produced 1861 so replacement parts are really not an issue.

u/gleam · 5 pointsr/Watches
u/SonicDethmonkey · 5 pointsr/Watches

Always good to see more of Sinn! I hear Polywatch works wonders for the acrylic scratches.

u/phoenixdigita1 · 5 pointsr/oculus

I've seen a number of redditors praise Polywatch

https://www.amazon.com/Polywatch-Plastic-Lens-Scratch-Remover/dp/B0014R9V9O

Obviously only take the polywatch action if Oculus support don't help you out.

Once fixed maybe contemplate putting lens protectors on. These ones worked for my Quest which I believe has similar lenses to the Rift-S.

https://imgur.com/a/jGDzyf2

u/i_was_valedictorian · 5 pointsr/Hardcore

The watch community swears by Polywatch to buff out scratches on plastic crystals. You oughta check it out.

Or do what I did to avoid it from the start and cut a piece of a phone screen protector the size of the flat part of the crystal and stick that on.

u/SteampunkSloth · 4 pointsr/Watches

This is true! If it's the same model that I saw the crystal is Hesalite plastic! You should be able to easily remove most scratches with a bit of love and some Polywatch: http://www.amazon.com/gp/aw/d/B0014R9V9O/ref=mp_s_a_1_1?qid=1463377873&sr=8-1&pi=SY200_QL40&keywords=polywatch&dpPl=1&dpID=419qrOEjfNL&ref=plSrch

u/jament1947 · 4 pointsr/NintendoSwitch

You could try using a product like Polywatch, which is used to fill scratches in watch crystals that are plastic. In theory, it would work the same. Good luck!

https://www.amazon.com/Polywatch-Plastic-Lens-Scratch-Remover/dp/B0014R9V9O

u/metroidpwner · 3 pointsr/Watches

That's really awesome. I can relate to this pretty strongly since my father collects watches and got me into them as well. His piece of choice for every day wear when I was a kid was a Submariner that he still uses - maybe one day it'll be mine too! :D

What you mentioned about the clasps feeling cheap is quite true. If I understand correctly, for a long time it was more-or-less a trademark of Rolex, despite how counter-intuitive that may seem. More modern Rolex pieces have machined (as opposed to stamped) clasps which feel much more solid and less cheap.

As far as scratches, you can buff out a lot of the ones on the crystal with polywatch. Here's a link: http://www.amazon.com/Polywatch-Plastic-Lens-Scratch-Remover/dp/B0014R9V9O

I'm sure I don't need to tell you, but enjoy the piece and take good care of it!

u/zanonymous · 3 pointsr/Watches

If you have a plastic crystal, polywatch works wonders.

Otherwise, you're probably looking at replacing the crystal/watch.

u/j1mdan1els · 3 pointsr/Watches

Seems my first reply contained a link that wasn't allowed ... copied and pasted below with a different link ....

That should be hesalite - tap it with your fingernail and see if it's plastic or glass. If it's glass, then take it to a pro to polish out. If it's plastic, then it's really easy and you can do it at home in just a few minutes.

Now, given that the bezel looks great, cover it first with some low-tack masking tape. Rub the glass all over with 2000 grit wet and dry paper. It's going to look far worse before it looks better but have faith. There's no need to apply lots of pressure but 2000 grit wears out fast, so keep folding it over and keep sanding in a circular motion. Once all the big scratches are gone and you have a consistent "cloudy" glass, reach for this. I use a chamois leather but any clean cotton rag will do. Put a few drops on the glass and polish away. It won't take a minute to go from cloudy to as new.

If you haven't got the major scratches out, repeat all the above. After you're done this once, you'll get more confidence to do it again.

As for the servicing, I'm guessing with the LHD car that you're not in the UK? If so, can't really help on that one.

u/dj1809 · 3 pointsr/Watches

http://www.amazon.com/Polywatch-Plastic-Lens-Scratch-Remover/dp/B0014R9V9O

Haven't had to use it myself, but a lot of people swear by this stuff.

u/granolatron · 3 pointsr/fitbit

Check out a product called Polywatch (https://www.amazon.com/dp/B0014R9V9O/). I've used it on a few devices and it buffs out any scratches real easily.

u/turdbogls · 3 pointsr/Watches

do you know when the watch was serviced last? it might need a servicing (which can be quite expensive) before you want to wind it too much.

you wind the crown clockwise (away from you) and its all done by feel. it'll wind freely for quite a few turns, then you will start to feel it get tighter and tighter. when I had a hand winder, I would wind it very gently, using a soft grip of the crown, and eventually I'd "hit a wall" and my fingers would slip off the crown. this is fully wound. it took me like 40 winds to get there. so, now that I knew how many winds it took, I wanted to find out the power reserve. once I knew that, I could fairly accurately predict when I'd "hit the wall" again....I would just stop winding like 5 turns before that and I'd be good.

whatever you do, NEVER give it a wind if you feel resistance. it should be fairly smooth all the way until it's fully wound.

as for the glass, it might by acrylic (plastic) in which case a tube of Polywatch should take out most scratches. you say it's damaged, but unless its chipped or cracked, you still have hope of restoring it for cheap.

I'm no expert on vintage Timex's, but it looks like a Marlin. but then again, all vintage hand winders look like a Marlin to me :)

it looks like it's on a Rally strap (big holes in it) which doesn't fit the watch IMO. I'd throw it on a Croco leather, or just a regular smooth leather strap. I've been happy with clockwork synergy leather straps. the dapper and gentleman collection are great, but the leather is quite thick.....might look weird with the svelt lugs that watch has. but their croco leather is nice from what I've heard and should fit much nicer. you can use code CWSSMR for 10% off too.

u/staggerb · 3 pointsr/Watches

Zeppelin is a well-respected brand, and I'm a fan of a lot of their designs. This one in particular has a nice look to it. One thing that you should be aware of is that it says it has a hesalite crystal. While hesalite is known to have a certain warmth that mineral crystal and sapphire lack, it isn't widely used for crystals anymore, as it tends to scratch rather easily. However, the scratches are easily taken out with a product polywatch.

That watch also has a quartz movement; collectors typically gravitate towards mechanical movements, although there is certainly nothing wrong with quartz (which is, in fact, more accurate, and will probably last longer without service aside from battery changes).

Also, despite the fact that is rated at 30m water resistance, it likely won't hold up to swimming or extended time in water, although some splashes from hand washing/rain/etc shouldn't affect it.

If you want to look at other entry-level brands, Seiko and Orient are the usual suspects.

Enjoy your watch!

u/wkfink · 3 pointsr/malefashionadvice

You'd be surprised. I thought I'd scratch the shit out of my Raven but the acrylic is still mostly scratch free. I have some small hairlines, but those are polished out with Polywatch.

Acrylic also stands up better to harsh drops/bangs which would normally shatter sapphire.

Nice watch though. I like the choice.

u/rishon · 2 pointsr/Watches

Thank you for the thorough answer! I have Polywatch on the way - is Displex the same stuff or should I cancel the Polywatch order and get Displex instead?

u/VentedSteak · 2 pointsr/Watches

I'd say it's worth a cleaning, at the very least. Any competent watchmaker should be able to do it, or you could look into sending it to Tissot for a service. A basic cleaning shouldn't be too expensive, maybe a hundred bucks or so. In the meantime it might be worthwhile to invest in something called Polywatch, which you can use to take the scratches off the acrylic crystal. Then pick up a decent leather strap (generally anywhere between $30-$120, depending on whether you want genuine or imitation croc, what kind of stitching, buckle or deployant, etc) and it'll look great.

There's a couple of these on Chrono24, so if you want to know what these are going for here's a link. Yours might be worth a little more versus a stainless steel model because of the gold content, but the condition that your watch is in will hurt the value a bit. http://www.chrono24.com/en/search/index.htm?query=Tissot+PR516+Vintage&dosearch=true&searchexplain=true&goal_suggest=1

u/RagingReptar · 2 pointsr/pebble

Holy shit didnt you put a protective case over it! Try putting some poly on it ? Get it here on Amazon

u/jontmar · 2 pointsr/Watches

Polywatch, It's a polish for plastic lenses (acrylic), it works wonders on small dings and scratches.

u/dilated · 2 pointsr/Watches

I kind of like the scratched up look, but have you considered a round of PolyWatch?

http://www.amazon.com/Polywatch-Plastic-Lens-Scratch-Remover/dp/B0014R9V9O

u/Godziillla · 2 pointsr/pebble

I've used this stuff to fix the scratches on my OG pebble. Works pretty well for me.

u/mattymattmattmatt · 2 pointsr/PSVR
u/koshercowboy · 2 pointsr/edc_raffle
u/Nenotriple · 1 pointr/vita

I've used Polywatch plastic buffing cream before on my PSP, it worked, but it took a very long time. The Vita screen is likely harder than the PSP, so it's probably going to take even longer to buff. (1.5-2hrs)

http://www.amazon.com/Polywatch-Plastic-Lens-Scratch-Remover/dp/B0014R9V9O

u/Nameless2nd · 1 pointr/Watches

You need some Polywatch, a few microfiber polishing cloth and a few minutes.

Wipe the crystal with a clean cloth to ensure that nothing remains that could scratch the crystal more. Apply a small drop of Polywatch to the crystal and polish with a clean cloth for two or three minutes with gentle pressure. Remove all residue with a clean cloth. Be happy.

u/InternetUser007 · 1 pointr/pebble

Check out poly watch on Amazon. A lot of people have reported good results at fixing Pebble scratches.

u/almightywhacko · 1 pointr/pebble

Scratch resistant plastic is still plastic. It will scratch or gouge if hit against a harder substance with moderate force. I have cracked and chipped crystal watch lenses by hitting them on a door which just goes to show that scratch resistant doesn't mean scratch proof.

If you are really interested in restoring your Pebble's face, just get some Polywatch or something. If the scratches are very very bad, get a Turtlewax Headlight Restoring Kit (only use the 8000 grit sanding pads).

u/Kazyole · 1 pointr/Watches

There's a product called polywatch that's a miracle substance on acrylic/plexi crystals. Just apply a bit of that, rub it down with a microfiber cloth for a couple minutes, and good as new.

Also, nice choice. That's a hell of a first watch.

u/traken · 1 pointr/guns

You might try something like a scratch remover.

u/TRE45ONOUS_CHEETOH · 1 pointr/OculusQuest

Of there are scratches just use polywatch

Polywatch Plastic Lens Scratch Remover https://www.amazon.com/dp/B0014R9V9O/ref=cm_sw_r_cp_apa_i_uenMDb4F613D8

u/CV1_Cable_Display4_U · 1 pointr/oculus

While replacing any part of the Oculus Rift CV1 HMD can be challenging, it's not rocket science. You can buy a replacement lens on Ebay for approximate $40. If the scuff is not deep you can use Polywatch

Polywatch Plastic Lens Scratch Remover https://www.amazon.com/dp/B0014R9V9O/ref=cm_sw_r_cp_apa_i_uenMDb4F613D8

u/SpikeX · 1 pointr/pebble

It's prime-eligible on Amazon.

And if you don't have Prime, shame on you. Go get it right now.

u/montydrei · 1 pointr/Watches

Which Citizen watch is it? If it has an acrylic crystal, then it seems Polywatch is the normally recommended product for removing scratches.

u/IMeasure · 1 pointr/Watches

The scratches can be simply polished out using Polywatch.

A non running watch is going to be worth less. Did you do a battery change?

u/WaffleMonster42 · 1 pointr/EDC

Looks tough as nails on that strap. I love vintage military watches. If i were you i'd get some polywatch and clean up that crystal on the watch.

u/chaching37 · 1 pointr/Watches

PolyWatch is something worth trying. I was able to smooth over some scratches that I found on my Seiko with a mineral crystal.

edit: downvote? I wonder.

edit 2: I stand corrected. As ArkJasdain said, use Polywatch only on acrylic crystals.

u/Pooh_Bear · 1 pointr/3DS

If you can't get it fixed through Nintendo, this stuff works very well for getting the scratches out. I used it after I got a few small scratches playing The World Ends with You, and it seemed to get them right out. Now I have a screen protector on there.