Reddit Reddit reviews Propylene Glycol - Food Grade - USP - Kosher - 18 oz net wt in a 1 Pint Safety Sealed HDPE Container with Resealable Cap

We found 24 Reddit comments about Propylene Glycol - Food Grade - USP - Kosher - 18 oz net wt in a 1 Pint Safety Sealed HDPE Container with Resealable Cap. Here are the top ones, ranked by their Reddit score.

Industrial & Scientific
Lab & Scientific Products
Lab Chemicals
Chemical Standards
Propylene Glycol - Food Grade - USP - Kosher - 18 oz net wt in a 1 Pint Safety Sealed HDPE Container with Resealable Cap
Food Grade USP KosherPure Propylene GlycolUSP Propylene GlycolCrystal ClearSafety Sealed Resealable HDPE Container
Check price on Amazon

24 Reddit comments about Propylene Glycol - Food Grade - USP - Kosher - 18 oz net wt in a 1 Pint Safety Sealed HDPE Container with Resealable Cap:

u/OhAbaDis · 8 pointsr/ploompax

A comment I submitted in a different thread:

Awesome! I've had my pax over a year and I'm still loving it. It still hits like a champ and the cleaning is to me easier than its made out to be. The stealthiness of it amazing. I've told a bouncer its a portable battery or an ecig and gotten no questions. Just a heads up the very first time cooking a fresh bowl definitely smells like weed. All vaping smells some, but that first heating and first few hits are by far the strongest. After that is gets much less pungent. If I'm packing it at home before going to a venue I'm nervous about, I'll take the first 2-3 hits at home. Out of a full oven I can get 3-6 good sessions with stirring, depending on the weed and people.

Here's a couple tips I've picked up.

Be careful of the mouthpiece spring. It's deceptively strong and will launch your mouthpiece to dark places. Also, when pushing down the mouthpiece to lock it, the "sweet spot" is juuuuust before all the way down. It's hard to explain. But you can actually push the mouthpiece down too far and it won't always lock. My first time using it I was pissed because it wasn't locking. But I was pushing it too hard and past the lock point. Pushing it down lighter was the answer.

Dental brushes dipped in alcohol work great for scrubbing out the oven and mouthpiece and can be purchased at any store/pharmacy. The lube is food grade propylene glycol and can be purchased at certain stores or online for cheap. Such as http://www.amazon.com/Propylene-Glycol-Pint-Free-Shipping/dp/B005F5KYM4/ref=sr_1_3?ie=UTF8&qid=1418272765&sr=8-3&keywords=propylene+glycol. Rub a few drops on/inside the mouthpiece tube every time you clean it to keep it from sticking.

When you're cleaning it be careful of getting the temp change button wet. If it gets wet, it will think it's on and the oven will start heating. That sucks if you are cleaning it and don't notice.

I've found its better to Charge the pax right side up with the charger on top. It helps makes sure that no resin leaks up the tube and is more stable.

If you rotate it on its long axis (doing a barrel roll) 3 times, it enters party mode and the front light flashes. This means it won't stop heating if it's kept still. Normally if it's kept still for a few seconds it goes "idle" and stops heating. The flashing light also looks pretty cool. You can also play Simon says against your pax by turning it on its long axis 7 times I think. YouTube has a good pax Simon says video with the steps. Both tricks are great when showing your pax to friends.

u/zosoleary · 6 pointsr/ResearchMarkets

holy crap this is scary as fuck! please please please be careful. it's very obvious you don't know what you are doing. remember 2 grams is 2,000 pills. don't try to eyeball doses or keybumps or anything like that. first step: get a milligram scale!!!! you said earlier you have a gemini 20, that's would work just fine. then you are going to need a graduated cylinder, and some PG. i do 2mg per 1 ml of pg. so i weigh out 100mg of etizolam, carefully measure out 50 ml of pg then mix the two in a vial. just shake it hard core then let it rest overnight then shake it some more (takes it a while to dissolve in PG). make sure to store the vial outside of sunlight because that damages the etizolam (i wrapped electrical tape around my travel vial). then get a transfer pipette or oral syringe and make your dose (half a ml for 1 pill, 1ml for 2 pills). tastes horrible, best to put it in a drink or have a chaser handy. PLEASE BE CAREFUL!!!! it's hard to measure out under half a ml accurately so 10mg a ml means you HAVE to do at least 5 at a time. it's just a good recipe to extreme and dangerous addiction and would make it even harder to taper off.

u/jonnyfunfun · 6 pointsr/vaporents

Another vote here for the propylene glycol available on Amazon. This is what I got, works beautifully.

u/tarzan_boy · 5 pointsr/ploompax

Ill always recommend #1 but I have seen other people suggest #2 as a safe alternative.

  1. Pax Official Site

  2. Amazon Merchant

    Before you make your decision on using an alternative take heed of this warning from Ploom (source: some site called "Rich Malley's blog", but it seems like a legit CSR Reply):

    >Regarding my suggestion that AstroGlide is an acceptable substitute for the lube they offer for purchase, Ploom pointed out that if a Pax owner damages her vaporizer by using anything other than their officially approved lubricant, she could void her 10yr. warranty.

u/CanoDonta · 4 pointsr/ploompax

I bought Propylene Glycol off of amazon. That's what I've seen everyone suggest as an alternative.

u/v64 · 4 pointsr/ploompax

This happens when the mouthpiece loses its connection to the slot it's plugged into, making the Pax think you took the mouthpiece out. This can happen if a lot of resin has built up on the mouthpiece stem.

To fix, clean your mouthpiece stem really well. Cover the stem in the Pax provided mouthpiece lubricant (or if you want to buy it in bulk yourself, it's simply food grade Propylene Glycol) and plug it in.

To prevent build up in the future, never store your Pax mouthpiece side down. When I charge it after a session, I leave it mouthpiece up and plug the adapter onto it upside down. This way, the oils don't run down and gunk up the mouthpiece and stem.

DON'T put alcohol in there to clean it out. Ploom advises against it, and I disregarded that advice and ended up having to send mine in for an exchange (credit to Ploom's customer service though, I was able to get a new unit in less than a week, no extra charge).

u/_treefingers_ · 4 pointsr/ploompax

Grab some Zen Pipe Cleaners
&
Grab a bottle of Propylene Glycol (lube for the mouthpiece)

u/rengfx · 3 pointsr/ploompax

This is what I got

http://www.amazon.com/gp/product/B005F5KYM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

less than ~$8 and will last literally as long as you could possibly need it to

I stick my pinky finger in there and dab a little bit on the metal portion of the mouthpiece, you don't need much

u/Gneubs · 3 pointsr/electronic_cigarette

Amazon has it in amounts from 1 pint to 5 gallons. Dunno about you, but they ship to me pretty quick. And no probing questions.

But NSA WILL know! :)

(EDIT): Also, I posted this link a little while ago that has some good information about PG labelling, so you'll know what you are buying.

u/mixolocrian · 3 pointsr/ploompax

case (pouch)

flower vial(s)

mlfb finishing grinder you can use a regular grinder and hold it upside down to grind finer, but the finishing grinder is beautiful and short enough to fit in my case.

edit: amazon lube

amazon pipe cleaners

case and vials above are smell safe. my every day carry is that bag with the pax, two jyarz (one for fresh one for abv), the finishing grinder, and a couple extra pipe screens in case i am a klutz.

oh also a stirring tool.

u/MattZuke · 3 pointsr/electronic_cigarette

>If I can ask a quick question: Why do so many e-cig users buy a low nicotine (12-18 mg) juice? Isn't it better to buy some with a high nic content and vape less? Just something that's been bothering me.

Or buy 24mg/ml, cut it down with some PG.

There is a simple and obvious answer, I buy 18 or under because I don't like the taste of 24.

u/ajnuuw · 3 pointsr/AskScienceDiscussion

Can't believe no one's thought of [propylene glycol] (http://en.wikipedia.org/wiki/Propylene_glycol) yet. It's very safe but can literally be used as antifreeze. LD50 is very high - [>20g/kg in rats] (http://www.sciencelab.com/msds.php?msdsId=9927239), miscible with water, generally recognized as safe by the FDA, and you can buy it "kosher food grade" on Amazon. Oh yeah, it's also a little sweet and is even marketed as those [Mio fit water additives] (http://www.makeitmio.com/), which means they could've gone out, bought a bunch and mixed it with water and then put it in the freezer.

u/_accountisthrowaway_ · 3 pointsr/vaporents

It's called propylene glycol. You need the good grade level. Amazon has it for $7.79 a pint and it should last you until it expires (years).

u/pds12345 · 2 pointsr/ploompax

http://www.amazon.com/gp/product/B005F5KYM4/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1

I just ordered this about 2 weeks ago. it is the exact stuff ploom gives you and its really cheap for a lot of it!

Edit: All it takes is a couple drops of the stuff a couple times a week. So it is definitely worth it.

u/Roast_A_Botch · 2 pointsr/DIY_eJuice

http://www.amazon.com/gp/aw/d/B005F5KYM4/ref=mp_s_a_1_1?qid=1382292583&sr=8-1&pi=AC_SX110_SY165_QL70

They also have quarts for $12-13 and gallons for $33. It's USP and a highly recommended brand. I wouldn't trust a PG "solution" as that implies there's other ingredients. Also, you want USP as that's at least food grade or Pharma grade. If it doesn't say USP, it's probably industrial grade, which means lots of impurities.

u/[deleted] · 2 pointsr/ploompax

i cant help you with the local part, but amazon has it

u/BlackMoonWolf3113 · 2 pointsr/entwives

Hey! I love the purple pax! The only accessories I use are rubbing alcohol, cotton pipe cleaners, and alcohol wipes. Oh, and lubricant. I did an Internet search for the lubricant, it's propylene glycol. I found a pint of it on amazon for $8. (That will last forever.)

http://www.amazon.com/Propylene-Glycol-Pint-Free-Shipping/dp/B005F5KYM4

Here is a video on how to apply the lubricant. I tend to lube it after every cleaning.

http://youtu.be/W6-IcN6segw

Every pax comes with a small amount of cleaning supplies, but they really didn't last long for me. Cleaning is a little tedious, but it vapes so much more easily when it's clean. Here is a good video about how to clean it.

http://youtu.be/Cowj6W1qxjQ

I find that 10 days is the absolute longest I can go without cleaning it, and that's with daily use. And honestly, I should probably tend to it more like once a week.

Regarding cute accessories, there are some really cute pouches for Pax on etsy!

https://www.etsy.com/market/pax_vaporizer_case

Good luck with whatever you decide to go with! :) sorry for all the links, I'm on my ipad and watching The World's End and can't bring myself to do proper formatting right now) ;)

u/aqble · 2 pointsr/electronic_cigarette

I bought mine from Amazon (PG, VG). I read in some thread that Essential Depot is the supplier for a lot of vape shops.

u/mrlightyear22 · 2 pointsr/ploompax

This is the same. Im unsure about what you posted. Propylene Glycol 1 Pint https://www.amazon.com/dp/B005F5KYM4/ref=cm_sw_r_awd_gmBeub0X9WZM7

u/lhr0909 · 1 pointr/ploompax

The solid red light you are having is the temperature-light issue. Make sure you clean it regularly, and leave it upside down (oven at the bottom) so that the piece stays as clean as possible.

I will buy some mouthpiece lubricant (or just Propylene Glycol (Amazon Link)) to lubricate the mouth piece connection part thoroughly. You don't need a lot, but make sure it is lubed up in the connection part. It always solves my temp-light issues.

Make sure to checkout the wiki in this subreddit on how to clean the pax.

u/TrimPot · 1 pointr/Etizolam

I'm assuming you have a gemini-20 or something similar. Accuracy is about +/- 3mg with larger amounts. I'd suggest going for around 1mg/ml solution as this will be easy to measure and if you are mixing into 100ml+ the inaccuracy won't matter at all. You can find PG on amazon, you can also find it on some online vape shops because it's one of the main base ingredients in eliquid. Just get yourself a beaker to measure it out and a blunt tip syringe to measure your doses.

u/cooneyes · 1 pointr/vaporents

Do you recommend any particular lubricants? This product looks good. Chemically it's identical to what Ploom sells.

u/dannydrak · 1 pointr/cigars

They make them pretty small.

That was just a quick google search. Dig around for size and price. You can get a bottle of PG solution locally for usually around $6-$8 for an 8oz to get you started. I'll see if I can find you a sale online....

The tubes work fine, too, but are not the same thing and do not use PG.

EDIT: The cheapest way to get PG solution is to make it yourself. Just order yourself some PG and mix it in a 1 to 1 ration with distilled water. Accuracy isn't hugely important, but should be within 10%. This will make 2 pints and last you a very long time.