Reddit reviews Rain Bird PRF07530S Drip Irrigation In-Line 30 psi Pressure Regulating "Y" Filter, 3/4" Male Pipe Thread
We found 2 Reddit comments about Rain Bird PRF07530S Drip Irrigation In-Line 30 psi Pressure Regulating "Y" Filter, 3/4" Male Pipe Thread. Here are the top ones, ranked by their Reddit score.
3/4" Y filter unit combines filtration and 30 psi pressure regulation in one pieceReduces the number of components in system and speeds installationProtects and prevents clogging of downstream Drip irrigation components200 mesh (75 micron) stainless steel filter pre-installed; cap unthreads for quick cleaningWorks with all types and brands of 3/4" irrigation valvesRobust body and cap constructed of glass-filled polypropylene for reliable long-life3/4" x 3/4" male pipe thread; 150 psi pressure rating
Oh i was looking on my phone before. The retro-1800 model is a low flow sprayer head. Typically you see these in beds with drought resistant plants. These work fine but waste a little more water than drip tubing. This may be an easier way for you to lower your water out
Typically when someone says "drip irrigation" they mean tubes like this. Its the most efficient way to water the soil - there is much less wasted water. You just space the tubes as far apart as the emitters are spaced.
This tubing will work with the RCKIT. But it does not look like RCKIT includes a filter. The drip tubing gets clogged pretty easily so typically you put a filter like this inline after the valve and a flush valve that periodically flushes the drip tube of any sediment buildup. Both of thes would be placed in a small box. Sediment buildup and drip tubes clogging can be a big deal if you are using non-potable water like well water. It's not nearly as big of an issue for systems using potable water.
I got to thinking... if you’re getting a lot of rust it sounds like you have galvanized pipes. If that’s the case, all new sprinklers com with a filter at the the nozzle. If you have pvc, this will work: https://www.amazon.com/Rain-Bird-PRF07530S-Irrigation-Regulating/dp/B006JZ51MC/ref=mp_s_a_1_3?keywords=drip+filter&qid=1565144267&s=gateway&sprefix=drip+filter&sr=8-3
This is 3/4” so if you have one inch you’ll have to get adapters. But still.... with pvc you can get a new sprinkler with a filter at the nozzle. That’ll be much easier and more cost effective whichever pipe you have.