Reddit Reddit reviews Rayson Empty Spray Bottle, Frosted Assorted Colors

We found 10 Reddit comments about Rayson Empty Spray Bottle, Frosted Assorted Colors. Here are the top ones, ranked by their Reddit score.

Beauty
Hair Care Products
Styling Tools & Appliances
Rayson Empty Spray Bottle, Frosted Assorted Colors
With Rayson's ergonomically correct comfort grip trigger head that fits the hand to make lifting and using easier.To lessen the irritation of carpal tunnel syndrome.Empty spray bottle 8 oz. Frosted assorted colors
Check price on Amazon

10 Reddit comments about Rayson Empty Spray Bottle, Frosted Assorted Colors:

u/KareasOxide · 15 pointsr/ElectricForest

Spray bottles are a god send to cool off especially on the really hot days.

Pro Tip: Do not spray people without asking!

u/tangbang · 2 pointsr/goodyearwelt

I just use my regular Lexol mixed with some water in a little spray bottle I got off amazon. I don't think this is the exact one I use, but I use something like this. Just find a conditioner that you personally deem to be environmentally friendly enough, and the entire mixture should be environmentally friendly. (Water usage isn't going to cause any environmental harm) I think a lot of the spray conditioners are aersol based, which could release some nasty chemicals into the air. This is just a little spritzer bottle which won't do that.

u/UnderSomeRock · 2 pointsr/Naturalhair

I would definitely look into the LOC method! What products are you currently using in your hair?

So this was my comment on a post from about a month ago, but it might help you too!:

I have my best luck on hair that is drenched in conditioner. I never try to detangle dry hair (but it works for some people). My method for extremely tangled hair:

  • section hair into 4-6 sections with clips or hair ties

  • apply conditioner to a section till drenched. (Sometimes it helps to either (1) wet hair first with a spray bottle like this, then apply conditioner, or (2) mix conditioner and water in a spray bottle

  • finger detangle section

  • use wide tooth comb like this to gently detangle hair. start at the end of the hair and with each pass of the comb gradually move up higher until you reach the root of your hair and are combing from root to ends

  • put the section back up and move on to the next, following the same steps

  • shampoo and condition hair like normal

  • for extra detangling, I might finger detangle/ comb my hair again while conditioner in is my hair, using the stream of water to help ease out any tangles

    If my hair isn’t too tangled, I basically do the same process, but I do it all in the shower (sectioned hair, detangle section by section with conditioner)

    Naptural85 on YouTube also has some pretty great tips/ videos showing exactly how she does it

    Also, you should totally check out r/curlyhair.

    Sorry this was so long! 😅
u/mastamomba · 2 pointsr/DebateReligion

There is only one valid response against this argument. This one!

u/thirdxeye · 2 pointsr/mac

Most glass cleaners are ok. You still can't be sure if the one you have contains any aggressive chemicals that will mess with the coating. So I wouldn't use them.

Get a spray bottle (or use an empty one you have at home), fill it with one third 70% isopropyl alcohol and two thirds distilled water. Both are available everywhere in supermarkets, hardware store, etc.
Distilled water so it won't leave any residue (normal water has minerals and stuff), and isopropyl alcohol so it'll dry very fast. It's ok to clean screen with this. Some TV manuals say that you shouldn't clean it with alcohol, but they're talking about pure rubbing alcohol.
Get a microfiber cloth, spray a bit on the screen or cloth, then wipe the screen. Be careful at first, if there's a lot of dust you might add micro-scratches if it's plastic (not an issue on the MBP glass screens).
You can use this bottle to clean screens, windows, mirrors, etc.

edit If theres fingerprints or other stuff on the screen, add a bit of kitchen soap to the bottle. Best make another bottle. This too can be used everywhere in the house. You could also add some pure citric acid so it smells nice.

u/reallifedog · 1 pointr/BuyItForLife
u/LostInSillyParens · 1 pointr/ShrugLifeSyndicate

Post #2:

Preparation:

getting the supplies

Agar agar powder. [US](https://www.amazon.com/Telephone-Product-Thailand-Powder-Ounce/dp/B01KMHY2OU/) [Europe](https://www.amazon.co.uk/Special-Ingredients-Premium-Gelatine-European/dp/B00EZMPMNE)

Always start with agar! And don't throw old fully colonized plates out. Some contaminants (e.g. mycogone, AKA wet bubble disease will only show up after full colonization (white blobs oozing yellow/orange fluid). and that one (mycogone) will fck up your grow hard, been there done that...

Light malt extract. [US](https://www.amazon.com/Organic-Light-Dried-Malt-Extract/dp/B007XYGBXQ/) [Europe](https://www.amazon.co.uk/Balliihoo-Light-Spraymalt-1Kg-Bag/dp/B0153BASSY/)

Containers for no pour agar (Pasty Plates). [US](https://www.amazon.com/Glad-Food-Storage-Containers-Round/dp/B000WGBMMM/) [Europe](https://www.flaschenbauer.de/einmachglaeser/sturzglaeser/sturzglas-225-ml-to-82) (maybe use Google translate on that site). Also if you are in North America there are Glad mini rounds, they are used in the original Pasty Plate tek. They also have [430ml jars](https://www.flaschenbauer.de/einmachglaeser/sturzglaeser/sturzglas-430-ml-to-82) suitable as substrate containers

A pressure cooker. Good ones are a b**ch to find in Europe. I wouldn't buy [that one](https://www.ebay.de/itm/Pressure-cooker-17L-Stainless-steel-Made-In-Turkey-Largest-Size/133128864948) or similar constructed ones, they are complete s**t, build up next to no pressure and need ungodly amounts of water. I have two of them, but had to do some haphazard MacGyveresqe hacking to get them to sterilize properly, I'll bring that up later.

I also have a Fagor Alu 22 (22 liters, fits eleven quart bottles), but I think that model went out of production in 2017 without a replacement. IMHO the only sane option in Europe right now, would be to order a Presto from the US, they're ~80€ + 40€ shipping, so not that bad. [Presto 23 quart PC](https://www.amazon.com/Presto-Aluminum-23-Quart-Pressure-Canner/dp/B073NCFL2L/)

Also on US websites like shroomery, you'll always read something like "sterilize 90min @ 15 psi". Pressure cookers in Europe usually have no gauges and only go to 50-70 kPa (~7-10 psi). It isn't as bad as it sounds, since sterilization time isn't linear with pressure/temperature. I've found I can get away with 120 min sterilization time for grains, 75 min for PF sub and 30 min for agar.

Scalpel handle and blades. [US](https://www.amazon.com/100-Scalpel-Blades-One-Handle/dp/B01MPX3JTI/) [Europe](https://www.amazon.co.uk/Swann-Morton-Handle-5-10-Blades/dp/B004OIAVJY/)

(optional) inoculation loop. [US](https://www.amazon.com/OESS-Reusable-Inoculating-Inoculation-Bacterial/dp/B071DCS7TW) [Europe1](https://www.amazon.co.uk/Akozon-Inoculation-Inoculating-Microbiology-Laboratory/dp/B07KM7F8VH) [Europe2](https://www.amazon.co.uk/sourcingmap%C2%AE-Inoculating-Microbiology-Tissue-Culture/dp/B071X44DS4/)

Tyvek (for filtered lids). [US](https://www.amazon.com/Dupont-Tyvek-105gm-A5-Sheets/dp/B07418F31G/) [Europe](https://www.amazon.co.uk/Tyvek-75gm-Bumper-pack-sheets/dp/B004EXTKSW/)

(optional) oster blender attachments used for PF slurry or LI. [China](https://www.ebay.com/itm/4-Head-Ice-Crushing-Crusher-Blade-Replacement-Part-For-Oster-Osterizer-Blender/182451440105)

3M Micropore tape (for filtered lids and monotub holes). [US](https://www.amazon.com/3M-1530-1-Micropore-Tape-Pack/dp/B0082A9FEM/) [Europe](https://www.amazon.co.uk/3M-Micropore-Surgical-First-Medical/dp/B01KYK2666/)

A spray bottle for soapy water. [US](https://www.amazon.com/Tolco-Bottle-Frosted-Assorted-Colors/dp/B000H88PCU/) [Europe](https://www.amazon.co.uk/Leifheit-72416-Laundry-Sprayer/dp/B0049PB11Y/)

Isopropyl alcohol (rubbing alcohol), 70%. [US](https://www.amazon.com/Amazon-Brand-Isopropyl-Antiseptic-Technical/dp/B07NFSFBXQ/) (dilute down to 70%, that percentage is best for sanitization [EU](https://www.amazon.co.uk/We-Can-Source-Ltd-Fingerprints/dp/B07PGB5X6Y/)

A rack to elevate your agar dishes while you do transfers, like these that come with microwave ovens (contaminants tend to collect on the SABs bottom).

A slightly wet towel to put the SAB on. Some people disagree on this, I use the towel to absorb the sprayed soap/water mix and not having that run off the table.

A clear box that's modified as a SAB. I use this one as a SAB, maybe they ship outside Germany. Anyway the manufacturer is kis.it (builds the monotub too), so I think they might be available elsewhere in Europe: https://www.obi.de/aufbewahrungsboxen/obi-allzweckbox-santos-transparent-oversize-140-l/p/3333341?template=PDP&box=box4

More clear boxes used to fruit bottles (basically a monotub, just with individual substrate containers). I use these as unmodded monos (no holes, no flipped lid, lids not latched): https://www.obi.de/aufbewahrungsboxen/obi-allzweckbox-cadiz-l-mit-4-rollen-transparent/p/1930387.

Butane torch [US](https://www.amazon.com/Multipurpose-MDee-Culinary-Refillable-Adjustable/dp/B07MNN2B43) [Europe](https://www.amazon.co.uk/Kollea-Adjustable-Refillable-Blowtorch-Soldering/dp/B07QC1T6H5)

Bottles (can be wide mouth pint mason jars (US), quart Ziplock PP5 containers (US) or [these (which I use)](https://www.ebay.co.uk/itm/Round-Food-Containers-Plastic-Clear-Storage-Tubs-with-Lids-Deli-Pots-2oz-to-32oz/232308091965)

u/Filthybiped · 1 pointr/LifeProTips

Much better solution is a little spray bottle full of water put on the mist setting. Spray your clothes with a light mist before or after you put them on. It dries super quickly and wrinkles are gone. It's like goddamn magic I swear.

u/lykideus · 1 pointr/snakes

If you've got a screen top, covering it partially/mostly can really help increase humidity.

Having a larger water dish (wider/longer, not deeper) can also increase your humidity reasonably well - the more surface area, the more of it evaporates.

If you do get a dripper (or another electric humidity controller such as a fogger), there are thermostats that can control both temperature and humidity levels. Example (I'm not necessarily endorsing that one - I don't own it or anything).

If you don't want to spend money on an automated solution, get a little spray bottle and mist the viv as needed. Example.