Reddit Reddit reviews Record Washer System by Spin-Clean | Deep Groove Record Cleaning Helps in Reducing Pops and Crackles | Album Cleaner May Fix Skips That Have Lingered for Years | Proudly Made in The USA

We found 57 Reddit comments about Record Washer System by Spin-Clean | Deep Groove Record Cleaning Helps in Reducing Pops and Crackles | Album Cleaner May Fix Skips That Have Lingered for Years | Proudly Made in The USA. Here are the top ones, ranked by their Reddit score.

Audio & Video Accessories
Audio & Video Cleaning & Repair Products
Accessories & Supplies
Electronics
Audio & Video Disc Cleaners
Record Washer System by Spin-Clean | Deep Groove Record Cleaning Helps in Reducing Pops and Crackles | Album Cleaner May Fix Skips That Have Lingered for Years | Proudly Made in The USA
EASY TO USE - Easily deep-clean both sides of your vinyl records at the same time. No power or installation required. Don’t worry about the noise of motorized vacuum record cleaning system.CLEANS ALL VINYL TYPES - Spin-Clean washes 33, 45, and 78 records. Enough materials to clean up to 700 records! Compact size to allow for easy storage.PROPRIETARY CLEANING SOLUTION - Spin-Clean operates using specially formulated alcohol-free, new MK3 vinyl record cleaning fluid (4oz). Cleaning solution is a concentrate not viable on its own. It needs to be diluted in the base of the spin clean.INCLUDED IN KIT - Patented vinyl record washer basin and lid and compact size to allow for easy storage. Specially formulated alcohol-free, new MK3 vinyl record cleaning fluid (4oz). One (1) pair of premium record-cleaning brushes. One (1) pair of durabINCLUDED IN KIT - Patented vinyl record washer basin and lid for compact size. Specially formulated alcohol-free, new MK3 vinyl record cleaning fluid (4oz). One (1) pair of premium record-cleaning brushes. One (1) pair of durable rollers to accommodate LPs, 45s, and 78 RPMs. Two (2) super soft, lint-free drying cloths won't scratch your recordsMADE IN USA - Limited Lifetime Warranty valid with Amazon Purchase.
Check price on Amazon

57 Reddit comments about Record Washer System by Spin-Clean | Deep Groove Record Cleaning Helps in Reducing Pops and Crackles | Album Cleaner May Fix Skips That Have Lingered for Years | Proudly Made in The USA:

u/SirNarwhal · 11 pointsr/vinyl

You can get a Spin Clean which uses proper fluid (not soap) to clean your records and doesn't submerge the middle of your record and ruin it. It also includes microfiber towels and brushes to dry and also to get out any embedded dirt from grooves.

Or if you're cheap like me, you can just use microfiber cloths and anti-static spray like this and just spritz your microfiber towel/cloth with it like 2-3 times and give your record a quick wipe. Gets rid of any static that built up in the pressing process and taking your record out the first time, which 1) prevents it from picking stuff up and 2) gets any excess vinyl out of the grooves so you won't have any issues.

If you have a TON of money to blow, get a VPI machine, which is basically a bit like a mix of the Spin Clean or just some anti-static spray in that you wet the record with special fluid, spin it around on a special turntable while it's locked in, and then vacuum dry it. If you're lucky, places nearby may even have a machine. I have a shop where if I buy like $20 worth of stuff they clean a record for me for free or if I want, it's $1 a record to get cleaned and the results are amazing.

Hope that helps!

u/fightclub98 · 10 pointsr/VinylDeals

25% Off Spin Clean and accessories.

Also the same price on Amazon.


Deluxe and Limited Edition are also on sale on Amazon.


I use this thing on old records and brand new records and it’s amazing how much dirt are on some of the new records.

u/colorvinylguy · 9 pointsr/vinyl

as others have said, its worthwhile to upgrade to a turntable with an included dust cover. this will significantly cut down on dust on the tt.

some dust is inevitable, short of a white room. no one has really answered your question about maintaining a clear playing space or how to clean the stylus/records though. here's some more info.

---

cleaning the stylus

i use one of these.

however, if you want to go the inexpensive route, i dont recommend any alcohol based cleaners because it can degrade the connection of the diamond/ceramic/etc. tip to the cantilever. instead, you can use a magic eraser. dont go out and buy that mr. clean shit either, its a rip off. buy it in bulk for cheap and clean your whole house while you're at it! just keep in mind that this shit can and will snag on to your stylus and, if you're not careful, ruin your whole day with a bent cantilever.

if you want to go the alcohol route, make your own liquid. be sure to use distilled water(80%) and a mix of isopropyl alcohol(20%). i did this for a time with out any problems, but its not ideal. apply it with a stylus brush. APPLY THE SOLUTION DIRECTLY TO THE BRUSH. NEVER DIRECTLY TO THE STYLUS.

i even hear some people use contact lens cleaner.

if you be fancy...give this stuff a try. a good buddy swears by it, but im a cheap shit and can't speak to its quality or performance.

---

cleaning your records

you have many options here.

  • least expensive - hand held cleaners.
  • more expensive - spinclean
  • even more expensive - squeaky clean.
  • "pro grade" cleaning options such as loricraft, okki nokki, or smart matrix, etc.

    if you're just starting out, i would just go with a hand held cleaning solution for now. plenty of youtube videos online on cheap DIY cleaning methods as well.

    ---

    cleaning the platter and plinth

    i do this at least once a week. more if i'm spinning a lot. use a microfiber towel. NO WATER. water attracts more dust, and doesn't belong near sensitive electronics. remove the platter if you are able and be sure to wipe it thoroughly before using again. clean under the platter as well. DON'T wipe off any exposed bearings that are oiled/greased as doing so could harm the equipment over time.

    ---

    record storage

    if you live in a very dusty place, it might be worth it to invest in some outer sleeves for your records. for the most part though, as long as you keep everything clean you should be just fine. many people get by just fine without them.

    ---

    enjoy your new tt! :)
u/competitionroolz · 8 pointsr/vinyl

A spin clean is safer, designed for records, and relatively inexpensive, even if purchased new. I used one for years before investing in a VPI and it worked great.

u/JimboLodisC · 6 pointsr/vinyl

Wet wash them. Wet wash all your records. Wet wash old/used AND new records. Wet wash every single record that you get at least once.

Some options:

u/melikeum · 6 pointsr/vinyl

Your best bet will be to use a record cleaner like the Spin-Clean. To save money you can make your own washing fluid from some of the recipes listed here.

u/The_Vinyl_Record_Man · 6 pointsr/vinyl
  1. Keep them stacked vertically like so:
    https://c2.staticflickr.com/4/3610/3603521573_d308f3b61c.jpg

    Keep them out of direct sunlight for long times as well.

    If you want to protect the cases, check this out:

    http://www.ebay.com/itm/12-Record-Outer-Sleeves-/370832311308?pt=US_Music_Mixed_Lots_Other_Formats&var=&hash=item565754040c

    2: Cleaning? If you REALLY want to give them the works, you can get them professionally cleaned with a VPI machine but that's expensive, costs around 3$ per record. I'd recommend this:

    http://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU

    Everything you need to know is in the manual! I also just ordered a VPI machine, by the way, so I'm going to make a post soon on my thoughts.

    3: Not really. Just carry them by the edges/inner label, and keep them in their proper jackets when they aren't being used.

    4: For #4, see the above comment.

    Have a nice day!
u/Pewpewpwnj00 · 5 pointsr/vinyl

I personally recommend getting a Spin-Clean. Kit costs about a $100 and works well. The cloths that come with it can be washed and don't leave fibers on your records.

Amazon link: http://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU/ref=sr_1_1?s=electronics&ie=UTF8&qid=1458228206&sr=1-1&keywords=spin+clean

u/mytoesarewarm · 4 pointsr/vinyl

If you're only seeing large dust particles on the surface but not hearing much in terms of popping and crackling, then I'd go with just a basic carbon fiber brush like this AudioQuest one. If you're new to vinyl and don't already have one, it's a good thing to pick up anyway. It's good practice to brush each side before each spin. While these types of brushes won't clean a truly dirty record, they'll help your clean records stay clean.

If your records are noticeably loud and noisy then you'll probably have to go the route of wet cleaning. I see kits like this one a lot but I don't think they're really worth the money. You can do a better (and cheaper) job with:

  • Microfiber Cloths - Run them all through a cycle in your washing machine (just water, no detergent) to get rid of any fuzz.
  • Isopropyl Alcohol & Distilled Water - Put a solution of 1 part alcohol and 2 parts water into a spray bottle. You could even use as little as 1 to 4, I don't think it makes a huge difference. Make sure to get 90% plus alcohol and avoid any types of additives like menthol.

    You can lay one cloth flat to set the record on, spray it down and scrub around lightly with one of the cloths (it can help to dampen this with the distilled water). Personally I like to then dry the record with another cloth, spray it down with just distilled water to rinse it then dry again and repeat on the other side but you can find a method/system that works for you. If you're being super particular about it then remember to flip and replace the cloth the record is on so as not to contaminate the side you just cleaned. Also if you're worried about getting your labels wet, car applicator pads like these actually cover a label almost perfectly and they can also be used in place of a microfiber cloth to scrub the record, they work great.

    If you plan on sticking with vinyl for awhile though it's worth it to save up for a SpinClean. I was a skeptic for a long time but I'm glad I finally got one, it really is worth the money. It does a good job, it's well built and it's stupidly easy to use. If $80 seems too steep for a yellow plastic trough (which it really is, unfortunately) there are cheaper models such as this. Doesn't have a lid and comes with different cleaning fluid but it doesn't seem like a half bad option.

    Whichever option you go with always make sure you're putting your newly cleaned records into clean inner sleeves. If they were dirty in those sleeves it's very likely those sleeves are dirty too. Also remember to keep your turntable mat and stylus clean.
u/Falldog · 3 pointsr/vinyl

I had a bunch of records with mold on 'em and it cleanded off easily with a Spin-Clean.

u/Oseltaeb · 3 pointsr/vinyl

You may need to replace the belt. Look on eBay for a replacement. Is it worth keeping? That’s up to you. Do you like it enough to keep it? Don’t throw the records away. Give them a good wet wash. Also look into the Spin Clean for $80 dollars on Amazon: https://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU/ref=sr_1_3?ie=UTF8&qid=1527558951&sr=8-3&keywords=Spin+clean

u/BTsBaboonFarm · 3 pointsr/vinyl

The spin clean is probably the best entry-level kit out there

u/dr_torque · 3 pointsr/audiophile

If your sister's got a few warped records, a record clamp would certainly be useful. Cork mats OTOH tend to be less staticky than felt so would certainly be useful in dry environments. Should you be leaning towards the record clamp direction, Pro-ject will sell you one. You could also perhaps consider buying other stuff, like record cleaning kits, test records and/or gauges to help her set up her new turntable.

u/sharkamino · 3 pointsr/vinyl

Soap and tap water can leave residue and mineral deposits and chemicals that are not good for vinyl.

Did you watch all of the videos all of the way through? See how it is completely soaked here https://youtu.be/6rXsSzEhkn8?t=464

The small 1 or 2 oz bottles of cleaning solution included with the brushes is not enough to soak an album or two.

Make a large spray or squirt bottle full of cleaning solution and completely soak one side at a time. Do not use it sparingly, it's cheap, you will have a large bottle of it for a dozen albums.

After cleaning rinse off over a sink with plenty of just the distilled water from a spray bottle.

Or use a Spin Clean that soaks the vinyl in the tub of cleaning solution that you can also use the DIY solution in instead of buying more Spin Clean fluid.

u/MrCuzz · 3 pointsr/vinyl

A good way (not the best, but easy and affordable) is with a Spin Clean. I’ve returned quite a few mold-covered records from the dead with mine. https://www.amazon.com/Spin-Clean-Record-Washer-MKII-Complete/dp/B002UKSZUU/ref=sr_1_1_sspa?keywords=Spin+clean&qid=1570374947&sr=8-1-spons&psc=1&smid=A2LY9PGKPA6CIT&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyVVpMWkRGUkdYMjVJJmVuY3J5cHRlZElkPUEwODcwNzUxMUI4TFM2TTA3NlZSWCZlbmNyeXB0ZWRBZElkPUEwNTU5MTIzQ1NGQjZWNVo5TkdXJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

I’ve heard that vacuum-based cleaners are better, and I’ll believe it, but for now I’ve been really impressed with the Spin Clean, especially for under $100.

u/concretedonkey · 3 pointsr/vinyl

you are going to go through a few styli

giving the condition of the grooves

hopefully you make enough to replace them and break even


as far as making them sound less gruesome, a spin-clean would help
greatly (the most affordable option)

http://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU/ref=sr_1_2?ie=UTF8&qid=1374106342&sr=8-2&keywords=record+cleaner


u/revjeremyduncan · 3 pointsr/audiophile

Not sure what is making yours pop, but a Spin Clean record cleaner is handy to have, either way. Especially if you are buying used vinyl. There are DIY solutions out there, too, but this works really good if you have the budget. Cleaned up a lot of records I had that looked perfect, but still had some pops. Also, something to remove the static helps. I use anti-static sleeves.

u/boredinballard · 3 pointsr/vinyl

If it is really dirty, I use the wood glue method. I'll be buying a record washer soon though for more regular cleaning.

My regular cleaning is really just using an Audioquest brush to get any dust off right before I play the record.

As for the stylus, I use a Magic Eraser. I used to have that dust ball problem until I started using the brush. So stylus cleaning doesn't happen as often as it once did.

Here's some links:

Brush

Record washer

Magic Eraser

u/checkerdamic · 3 pointsr/vinyl

First, make sure you only use distilled water. Nothing out of the tap. Also, only use microfiber clothes on your records. If you don't have any, they are usually only a few bucks on Amazon or at Walmart.

There are a few options:

  • Make a DIY cleaning solution, there are tons of options out there if you google it or search /r/vinyl, usually it's water, a tiny bit of alcohol, and maybe a drop or two of dawn, sometime tergitol if you can pick it up.

  • You can buy or make a vacuum wand to clean the DIY solution off your records. Here's one on Amazon, but I've met a few people who have made their own versions for a few bucks.

  • I know you don't want to spend much money but I do have to mention that for $80 you can get a Spin Clean, it's very simple to use and mostly effective, but not as much a use a vacuum cleaner.

  • There is a wood glue method for cleaning very dirty records that some people swear by. I have never used it but there are some videos on youtube explaining the method.

u/HotDogsNoDoz · 2 pointsr/vinyl
u/VinylDealsBot · 2 pointsr/VinylDeals
u/SmokinCigars · 2 pointsr/vinyl

I have found the best way of cleaning my vinyl is with the Spin-Clean. At first I was skeptical about buying a piece of plastic at what seems to be a pretty high price. I figured I would give it a try and if it did not work I would just send it back. The Spin-Clean worked very well to my surprise. All my new and used albums gets cleaned by the Spin-Clean before it hits my turntable.

It is almost like a bath for records. The tub holds the water and the cleaning solution. The record is then spun on two rollers between two nice and tight velvet pads. The pads are just like the velvet cleaning brushes people are recommending. So when you are spinning the record in the tub both side are getting cleaned at the same time.

You would think that the record would get even more dirty by putting it in a tub of dirty water. The special formula cleaning solution binds to the dirt and sinks it to the bottom. They say that you can clean about 50 records with each tub. I find this not to be accurate, (I buy alot of used records that are dirty as sin) I get about 20-30 albums cleaned before I have to switch out the water. The solution goes a long way. You only need 3 cap fulls for each bath. I just bought a new replacement bottle (32ozs) of cleaner and it states only use one cap full for cleaning. That stuff is going to last forever.

I have tested albums by listening to them before and after and you can hear a major difference. I would 100% recommend this to any collector.

u/TophatMcMonocle · 2 pointsr/vinyl

I love what you've done, but as for cleaning Spin Clean should be number one. Frankly the glue method is ridiculous if you have a lot of records and record cleaning machines are too expensive, too big, too noisy, too maintenance intestive... Spin Clean is the way to go. Cleans as good as any record cleaning machine, costs $80, and is easy to use and put away when not needed.

u/radiofragments · 2 pointsr/vinyl

I use a Spin Clean (http://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU). It works pretty darn well.

If it's super dirty, I wipe what I can off first, then I put it in the spin clean, rotate it 3 full times in one direction, 3 full times in the other. Then the trick is getting the water off.

I have a large stack of microfibre cloths (http://www.amazon.com/12-pack-All-purpose-Microfiber-Cleaning-Dusting) that I swap out after every couple records. I put one cloth down on top of a 'lazy susan' (it is circular and spins freely) and lay the wet record on top of the cloth. Then I use another cloth and press it down against the record and spin the lazy susan under it, and it picks up the water. (I try to make sure the nap of the cloth is lined up with the grooves). Then I use a second, drier cloth to go over it quickly and get anything left.

It's a fair amount of work but it goes quick once you have the process down, and you end up with nice clean records.

u/coniferousresin · 2 pointsr/vinyl

If you want to clean them, one good cost efficient and practical way is to get a Spin Clean. It's also a good investment for future collecting.

u/mjmilino · 2 pointsr/vinyl

Here are my tips:

  1. Get some sort of record cleaning device. Could be a Spin Clean, could be a Squeaky Clean, or something more expensive than that. But get something. Once you have it, make sure you wet clean your records within a week or two of getting them. They'll sound better and it's worth it.

  2. Now that you've cleaned your new or used record, why not put it into a nice anti-static sleeve. I'm a sucker for the MoFi sleeves, but just find something that works for you. If you're wondering why you'd want to spend another $20 right now it ends up being $.40 per record.

  3. And once you've put that record in a nice anti-static sleeve you should put the whole thing into a nice poly outer sleeve to protect the jacket. Again, you can get a bundle of these (30 or so) for $5 at your local record store or find any number of places online. But the point is that if you're going to spend $15 - $30 for a new LP it's probably worth an extra $.50 total to protect it. People do things differently, but I put the jacket in the outer sleeve and plop the record in the anti-static sleeve inside the outer sleeve behind the jacket.

    Store those well-protected records vertically and out of the sunlight and you should be good to go.
u/bend_the_spoon · 2 pointsr/vinyl

Record cleaning machine would be a good investment for your budget. http://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU
Assuming your cartridge is aligned properly and the tracking force is set correctly, the distortion you hear is likely from dirty or wore out records. Upgrading the stylus on your cartridge would likely be a good, cheap improvement as well.

u/LaserRanger · 2 pointsr/vinyl

It might have helped, but I wouldn't do it again, at least not on an important record. (Not that Solitude Standing isn't important, it's a great album.)

get a spin clean -- they work great. On sale now for $60

https://www.amazon.com/Spin-Clean-Record-Washer-MKII-Complete/dp/B002UKSZUU/ref=as_li_ss_tl?ie=UTF8&qid=1542917761

u/m00dawg · 2 pointsr/vinyl

I would avoid anything that can come apart and place lint on the record (as in q-tips/cotton balls). Instead, consider one of these or these. Microfiber cloth can also work well.

If you feel the need to use liquid, either search online (or on /r/vinyl) for good homemade record cleaning solutions or consider buying some. Do not use straight alcohol or non-filtered (distilled) water.

Some folks really like this as well. It's more for deeper cleaning than you may be looking for. I almost bought one, but read some not so nice reviews about it and opted to hold off.

u/bookfancier69 · 2 pointsr/vinyl

You should always wet wash records you buy, new or used. It will help knock down static and your stylus will last longer.

There is a ton of ways to do it. Some people do a DIY solution with a spray bottle.

I’ve since upgraded but used a spin clean for quite awhile. That or any of it’s clones is a great starting point. I would recommend sticking to their solution as it contains a focculating agent which causes dirt particles to clump together and fall to the bottom.

u/vinyladventures · 2 pointsr/vinyl

Thanks! also would this be good for a very deep clean when I bring records home that are extremely dirty or is there something else i should get/do?

http://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU/ref=cm_cr_pr_sims_t

u/Freezerburn · 2 pointsr/lifehacks

That's a good way to get a deep clean but for the maintenance everyone that spins vinyl should have one of these. I usually run my wax through it every few plays and dry them off with a microfiber cloth. I was told once that it was like cleaning your glasses, if you never clean your vinyl it's like never cleaning your glasses. Totally worth the buy to maximize your audio experience.

http://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU/ref=sr_1_1?ie=UTF8&qid=1406746303&sr=8-1&keywords=spin+vinyl

u/kingtaco23 · 2 pointsr/vinyl

There's also the Spin Clean. As much as I want a machine, I can't bring myself to spend the money on one. That Amazon links tells me I bought it Christmas Eve 2010 and I've cleaned hundreds of records with it. And I'm still using the original brushes.

u/aforsberg · 2 pointsr/pinkfloyd

Depends on a number of things: anti-skate, tracking force, stylus health, vibrations, etc. What turntable are we using? Also the health of the record itself. If it's just dirty, that can cause skipping, but you'd notice surface noise LONG before skipping became an issue. I'd recommend one of these: http://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU/ref=sr_1_1?ie=UTF8&qid=1462806668&sr=8-1&keywords=spin+clean Local record shop uses them, charges like $1 per record you clean. I'm sure they make a killing on that alone.

u/osaru-yo · 2 pointsr/vinyl

I keep hearing good things about the Spin-clean. There are multiple videos about how to use it correctly.

u/brnthrshmn · 2 pointsr/vinyl

Which method/tool for cleaning is better out of the following two options:

Vinyl Vac

Spin Clean

u/Trochs · 2 pointsr/vinyl

It's the [Spin Clean] (http://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU/ref=sr_1_1?ie=UTF8&qid=1408325976&sr=8-1&keywords=spin+clean). Works pretty well overall, though I've been suspicious of the cleaning solution adding very light surface noise to records. Residue possibly, despite the company's claims otherwise. I'm currently modding a shop vac and crevice tool to use to vacuum clean the records.

u/mawnck · 2 pointsr/vinyl

Sounds to me like your cleaning was unsuccessful. I don't think that's poor vinyl or scratches. Sounds like a coating of gunk on the record.

Unfortunately the "standard RCA kit" (I assume you mean the "new" Discwasher) is garbage. In fact, some of that crackling may be residue from the cleaner. You need one of these: http://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU

Meantime, try rinsing with distilled water. Might help, especially if the Discwasher fluid is the culprit.

It's sort of hard to evaluate alignment by listening, unless there's a glaring problem. And I don't hear one.

u/Sgtpepper666 · 2 pointsr/vinyl

Invest in a spin-clean

u/AndyP79 · 2 pointsr/BudgetAudiophile

Unfortunately, disc cleaning great ain't cheap. For so many records to do at once, with them being so rough, this thing is the only way to go. Then get a groove washer with some g2 for light cleaning before each play. Try this out.....
Spin-Clean Record Washer MKII Complete Kit https://www.amazon.com/dp/B002UKSZUU/ref=cm_sw_r_cp_apa_i_YXslDb39F0JD8

u/cr0ft · 2 pointsr/BudgetAudiophile

https://www.amazon.com/Spin-Clean-Record-Washer-MKII-Complete/dp/B002UKSZUU - $80, which is a bit of cash I suppose.

There are random vinyl cleaning kits and liquids and brushes etc on Amazon too.

u/doitswitchfakie · 2 pointsr/vinyl

Hey! Stoked on your purchase! Curious though, did you mean LP120?
But hope I can help answer your questions!

  1. I tend to not, the main dust cover is plenty imo.
  2. A stylus brush, a wet anti static record brush, along with the one you have in your post. Basically just cleaning tools. Another good buy is one of these record sleeve packs. Once you start collecting, its best to replace the paper sleeve a new record would come with or an old sleeve from the thrift store. Keeps the records in their best shape. Lastly, one thing ive been eyeing is one of these. Seems to have some pretty good reviews.. haha
  3. Stick er on the turntable, turn it on and use the wet brush for a few rotations. NEVER move the brush in terms of side to side motions, always let the spinning do the work. This video has some tips on cleaning, give er a watch
    Hope my answers help!! Enjoy your new turntable!! Whatcha listening to??
u/official_business · 1 pointr/vinyl

In all seriousness though, cleaning records is hard. The groves are tiny and the dust is wedged in there and doesn't come out easy. Sometimes the groove is damaged and the record is just hosed.

I guess the question is what are you trying to achieve? Are you cleaning records before every play because you feel you should? Do they sound fine already? If so leave it alone. There's countless screwed up records out there that would have been fine if someone had just left the damn thing alone.

If they're crackly and sound like ass then yes cleaning them might be worthwhile.

The cleaning machine I linked to (mostly as a joke) is probably as best as you are going to find. There's a guy at the record fair I go to who has one of these and I've ran a few records through it. It works well and makes a noticeable difference to the sound of the record.

There's other record cleaning machines that are essentially a wet and dry vacuum cleaner. They do a good job of getting the gunk out. Problem is they cost anywhere from $300 to $4000 for that ultrasonic cleaner I linked to.

There's cheaper options such as a spin clean that apparently does an ok job, but I've never used it.

Another option is Record Revirginizer. I've used this and gotten some good results. Problem is that it's expensive.

The reason all the methods are "wrong" as you state ,is because everyone has an opinion and no one has any proof.

u/one800higgins · 1 pointr/vinyl

I use Spin-Clean to clean my records, and I use an anti-static brush on them to remove any loose dust prior to dropping a needle on the record each play.

u/Zyid22 · 1 pointr/vinyl

Spin-Clean Record Washer MKII Complete Kit https://www.amazon.com/dp/B002UKSZUU/ref=cm_sw_r_cp_api_i_ndGPCb3BNM7BX

This one?

u/jnbrown925 · 1 pointr/vinyl

It's a cleaning tool. You put distilled water and solution in the base, the record vertically between two brushes and half submerged in the water, then spin it to clean it. It gets the dust and dirt out of the grooves very well. It's a little pricey but there are cheaper knock offs that are just as good. The anti static brush will get static and dust off the surface of records when you play them.

u/PriceKnight · 1 pointr/VinylDeals

Price History


  • SPIN-CLEAN STARTER KIT RECORD WASHER SYSTEM Mk2   ^PureLink
    CamelCamelCamel - [Info]Keepa - [Info]Discogs

    _
    We don't Horse around here.
    ^(Info) ^| ^(Developer) ^| ^(Inquiries) ^| ^(Support Me!) ^| **[^(Report Bug)](/message/compose?to=The_White_Light&subject=Bug+Report&message=%2Fr%2FVinylDeals%2Fcomments%2Fe44t0u%2Fspin_clean_mkii_record_washer_kit_5999_wfree%2Ff96whal%2F%0D%0A%0D%0A
    %0D%0A%0D%0APlease+explain+here+what+you+expected+to+happen%2Fwhat+went+wrong.)**
u/Kappa305 · 1 pointr/ToolBand

i would recommend picking up a Spinclean. Great investment, very easy to use, and brings records back to life.

https://www.amazon.ca/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU

u/squarezero · 1 pointr/vinyl

I'm sure it works well, but the price is just ridiculous. I have a feeling it would be a much better investment to buy a Spin Clean for $80.

u/SeymourKnickers · 1 pointr/turntables

Indeed, minus some great luck, finding a killer vintage bargain is much easier said than done these days. $300 is still the vintage money to be comparing, since the Ortofon 2M Blue is going to cost north of $200 and anything vintage is likely to need at least a new stylus. The RT85 is a true bargain, considering you get a Stereophile Recommended cart with a nude elliptical stylus. That's really tough to beat.

I know the Vanatoo T1s with their PR design and agree you're in good shape for now in a moderately sized room. If you want to upgrade the system later, you can of course, but if you go this route you'll likely be set for good turntable-wise.

Edit: One thing I'd add is a Spin-Clean record washing system. I've been in plenty of forum brawls over this vs. an RCM record cleaning machine, but to my experience it does as good of a job. Many years ago I had a VPI HW-16.0 and hated the noise, the dog hated the noise, and it was a pain in the ass to use. The Spin-Clean allows easier batch cleaning since there's no overheating (which caused me to lose the VPI), liquid leaks, etc. I made the "downgrade" around ten years ago and have never looked back.

u/Piratica · 1 pointr/vinyl

I should also note that if you're record player isn't grounded it can cause static as well. But if your concern is the actual records, my advice would be to either buy a spin Clean or some other cleaning kit, and proper storage with anti-static sleeves.

Above all else, you have to realize that most records are NOT that fragile. They can take a pretty heavy beating. We do tend to discourage that and keep everything in pristine condition here because it's just bad form, but they wont be as easily damaged by light scratches as some would have you believe.

u/TheMenk · 1 pointr/vinyl

This is the one I was recommended and bought. It does a really nice job if you follow the instructions.

u/mudo2000 · 1 pointr/vinyl

https://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU/ref=sr_1_1?ie=UTF8&qid=1495459699&sr=8-1&keywords=spin+clean

This works and is cheap until you can afford the lowest end wet-vac system. I only use it on used albums and then generally only once. I save up and do about 50 at a time.

u/MmmmBeer814 · 1 pointr/vinyl

For your standard light dust removal I love the classic discwasher like this one. RCA has since bought out discwasher and uses a different tan color material on the bottom which doesn't work nearly as well as the old black felt. If you want to clean records that have actual buildup on them you could look into a record cleaning machine, but those can get pretty pricey. There are some DIY was to clean off record that you could look into too.

As far as damage goes, you're mostly looking for scuffs and scratches. If there's a scratch on a record you can usually tell how bad it it if it crosses an area of deadwax, like the small lines between songs. If the scratch doesn't show up on the dead wax, then it likely won't affect playback too much. It can be hard to tell by just looking at records. i have some that look pretty beat up, but play well and some that look pristine, but have places where they skip. If you can listen at the store before you buy that's the best way to judge.

u/nomtank · 1 pointr/vinyl

Well, you could just get a brush: www.amazon.com/Hunt-Carbon-Fiber-Record-Brush/dp/B001A9ST2G/

Or you could go all out and get a Spin Clean: http://www.amazon.com/SPIN-CLEAN-STARTER-RECORD-WASHER-SYSTEM/dp/B002UKSZUU/ref=pd_bxgy_e_text_z

Or a Disc washer: http://www.amazon.com/RCA-RD-1006-Discwasher-Record-System/dp/B000KMZKTO/ref=sr_1_1?s=electronics&ie=UTF8&qid=1411660898&sr=1-1&keywords=record+cleaner

There's plenty of options, but at the least I recommend a carbon fiber brush.